Hacking ULTIMATE System Menu 4.0 Guide

Status
Not open for further replies.

fst312

Well-Known Member
Member
Joined
Nov 4, 2008
Messages
1,176
Trophies
1
Age
35
Location
New York
XP
2,981
Country
United States
question does the firmware update update me to 4.0 sorry if this is an obvious question but after that you say to use preloader also once this is done i want to know if i really need a wad manager channel in my sd card or even the homebrew channel or can i just keep that on my system menu.

also how many people did use this guide or did something like this because like moviecouple there are alot guides out there and CopyCaet says whenever he tries this his system menu gets corrupted someone locate me to a guide that works with no problems should i choose to follow this guide or the other guides moviecouple gave a link to.i don't want to be bricked i just want to get to wii v4.0 without any problems.
 

assassda

Well-Known Member
OP
Member
Joined
Jul 31, 2004
Messages
284
Trophies
1
Website
Visit site
XP
219
Country
United States
fst312 said:
question does the firmware update update me to 4.0 sorry if this is an obvious question but after that you say to use preloader also once this is done i want to know if i really need a wad manager channel in my sd card or even the homebrew channel or can i just keep that on my system menu.

also how many people did use this guide or did something like this because like moviecouple there are alot guides out there and CopyCaet says whenever he tries this his system menu gets corrupted someone locate me to a guide that works with no problems should i choose to follow this guide or the other guides moviecouple gave a link to.i don't want to be bricked i just want to get to wii v4.0 without any problems.
the firmware updater gives you system menu 4.0 yes, you dont need WAD manager unless you want disc channel loading

follow the instructions and you will be fine. you dont need disc channel loading but if you do install the CIOS60 it says corrupt but fixed by reinstalling preloader (tested myself)
 

kikoolol

Well-Known Member
Newcomer
Joined
Mar 15, 2008
Messages
64
Trophies
0
XP
157
Country
United States
assassda said:
3) Install CIOS60BF.wad

google "CIOS60HK.zip"

4) Your system menu will now say "System Files Corrupt" but dont worry just hold reset and launch Homebrew Channel and install Preloader AGAIN


If you decide to downgrade back to 3.2

http://www.teknoconsolas.tv/wanin/cIOS-Downgrader_v1.2.zip

Sorry to ask again but... are you 100% sure about that? how come preloader still works? (if it was what you mean by : just hold reset and launch HBC)

Sounds a bit risky.
 

assassda

Well-Known Member
OP
Member
Joined
Jul 31, 2004
Messages
284
Trophies
1
Website
Visit site
XP
219
Country
United States
kikoolol said:
assassda said:
3) Install CIOS60BF.wad
4) Your system menu will now say "System Files Corrupt" but dont worry just hold reset and launch Homebrew Channel and install Preloader AGAIN

Sorry to ask again but... are you 100% sure about that? how come preloader still works? (if it was what you mean by : just hold reset and launch HBC)
Yes i am positive as I just did this myself to make sure it works
nintendolinky also confirmed this earlier in this thread

Disc Channel Loading is purely OPTIONAL and yes there are some risks involved
Just updating to 4.0 is completely SAFE
 

kedest

Well-Known Member
Member
Joined
Feb 6, 2007
Messages
3,289
Trophies
0
Website
Visit site
XP
534
Country
Netherlands
What's the 'Install CIOS60BF.wad' step? Isn't a custom IOS60 already installed by the patcher in an earlier step?
 

crosseye

Member
Newcomer
Joined
Apr 1, 2009
Messages
7
Trophies
0
XP
49
Country
United States
Just to be completely clear:

1) I don't uninstall softmii and just start at step 1 of your guide

2) after installing preloader the first time, I use the CIOScorp installer from softmii

3) Then I install CIOS60BF.wad (use wad manager, or do I use the CIOScorp installer from softmii?)

4) system menu will corrupt

5) restart with reset held and reinstall preloader

6) come back to thread to thank you
 

kikoolol

Well-Known Member
Newcomer
Joined
Mar 15, 2008
Messages
64
Trophies
0
XP
157
Country
United States
kedest said:
What's the 'Install CIOS60BF.wad' step? Isn't a custom IOS60 already installed by the patcher in an earlier step?

You can't launch in disc channel without it, optional but still, i wanted all features of my 3.2E back
smileipb2.png
 

assassda

Well-Known Member
OP
Member
Joined
Jul 31, 2004
Messages
284
Trophies
1
Website
Visit site
XP
219
Country
United States
crosseye said:
Just to be completely clear:

1) I don't uninstall softmii and just start at step 1 of your guide

2) after installing preloader the first time, I use the CIOScorp installer from softmii

3) Then I install CIOS60BF.wad (use wad manager, or do I use the CIOScorp installer from softmii?)

4) system menu will corrupt

5) restart with reset held and reinstall preloader

6) come back to thread to thank you
This is correct just as the guide says. I used WAD Manager 1.3 but throwing it in the CIOSCORP installer folder works too
 

crosseye

Member
Newcomer
Joined
Apr 1, 2009
Messages
7
Trophies
0
XP
49
Country
United States
Ok, one final question; have you seen startpatch? I'd like the things it offers:

QUOTE said:
Wii homebrew dev aquilino has released an app called StartPatch that lets Wii owners unlock the Nintendo Wii's services and make them region-free. If you've ever used crediar's Starfall app before, then this is similar. Here's a rundown of StartPatch 4.0's features:

* Region free
* Region free channels
* skip update check
* No health check
* move disc channel

This release, StartPatch 4.0, is only for System Menu 4.0, however, so make sure you don't go and try to use in on other System Menu versions. You also run the risk on bricking your Wii if you turn it off suddenly while you're using the app, so be extra careful about that too.
So would I just use wadmanager to install StartPatch?

Thanks again
 

CopyCaet

Active Member
Newcomer
Joined
Jan 7, 2009
Messages
35
Trophies
0
Age
33
Website
Visit site
XP
108
Country
Netherlands
The re-install preloader trick to get rid of the corrupt system message works indeed, thanks. Was getting tired of using cIOS downgrader/update again hehe
tongue.gif

STill can't run unofficial vc games though, but oh well, dont really use them anyway + can't have everything
smile.gif
 

assassda

Well-Known Member
OP
Member
Joined
Jul 31, 2004
Messages
284
Trophies
1
Website
Visit site
XP
219
Country
United States
crosseye said:
Ok, one final question; have you seen startpatch? I'd like the things it offers:
Startpatch and Preloader dont get along well, just wait for Hacks.ini to be updated on preloader and it will have these features
Or use a reloader like Menupatcher that you must reload every time you use it (no install)

QUOTE(CopyCaet @ Apr 1 2009, 03:28 PM) STill can't run unofficial vc games though, but oh well, dont really use them anyway + can't have everything
smile.gif
I wasnt aware of this but Original WiiWare and VC work fine on SD card using this tutorial
 

pumkinut

Active Member
Newcomer
Joined
Oct 28, 2008
Messages
33
Trophies
0
Age
51
Website
Visit site
XP
95
Country
United States
QUOTE said:
3) Run the IOS60 updater
say NO to install IOS61
say YES to install IOS60
say YES to patch IOS60
say NO to install the shop channel

http://www.yafaze.com/wii/4.0hacktools.rar
This part confuses me. Should we use Waninkoko's firmware updater (http://www.teknoconsolas.tv/wanin/Firmware-Updater_4.0.zip) and then the patcher from the hacktools.rar? Or one or the other? I thought Wanin's installer patched the SM4 files? If not, I stand corrected.

Edit:
Nevermind....I figured it out. My reading comprehension sucks today. I was up far too late last night.

That's all.

Oh, and thanks so much for a concise guide. Much better than a lot of the stuff that's flying around right now.
 

kikoolol

Well-Known Member
Newcomer
Joined
Mar 15, 2008
Messages
64
Trophies
0
XP
157
Country
United States
Thank you very much assassda, everything is working fine now (reinstalled CIOS60BF -> reset -> HBC -> reinstall preloader, CIOS60BF was the only part i was missing)

Now my 4.0E is like my 3.2E since we got hacks.ini for PAL
moogle.gif
 

Cooler89

Well-Known Member
Member
Joined
Sep 22, 2008
Messages
244
Trophies
0
XP
18
Country
United States
question how can we remove preloader .29 from 4.0 System menu.. using the 4.0 system menu wad?
 

moviecouple

Well-Known Member
Member
Joined
Dec 13, 2006
Messages
173
Trophies
0
XP
121
Country
United States
"If you want to load games from the disc channel you must install CIOSCORP"

What disc channel are you talking about. The normal channel that generally shows Wii or GC games loading?

"4) It is highly reccomended that you install preloader to prevent bricks. On the warning screen press A, 2, 1"

Do you mean the Health Warning Screen?
 

kikoolol

Well-Known Member
Newcomer
Joined
Mar 15, 2008
Messages
64
Trophies
0
XP
157
Country
United States
Bahh now i'm getting error #002 and #001 on disc channel
hate2.gif
, i give up, will use usb loader, less trouble.
 

iResilient

Active Member
Newcomer
Joined
Feb 9, 2009
Messages
37
Trophies
0
XP
24
Country
United States
Thanks for this. I was looking for a way to run CIOScorp with the new features and speed of 4.0U. :]
 
Status
Not open for further replies.

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Veho @ Veho: The cybertruck is a death trap.