You can see in the thread that I created the log I got from the PC and all the values of all the solder points. I tried everything in diagnostic mode. Also in the log you can see that the emmc cid is there:
Seller sent me an rp2040 version as he no longer sells instinctnx, I'm waiting for it to replace everything.
I have the instinct black version, but seller is replacing mine with the rp2040 as he no longer sells it.
I know, but the seller I bought mine does not sell them anymore and he's giving me a rp2040 for replacement.
I don't know what to try more with my instinct nx.
hey just wondering been attempting the mod myself, just trying to understand if getting OL on the b point is okay before i go any further its not bridged to anything but from what ive seen some people are getting 2.9v and some are getting OL?
I'm not tooo sure about other people, but my switches with the B points gettig OL seems to be working fine.
What value were you getting on your B point before you did any work on the switch?
My white instinct NX was giving me issues but when i did a swap with the black one it worked fine
Maybe just a defective card?
When desoldering the instinct CPU cable, take care as sometimes the capacitors can dift off the board.
Maybe check the ohm values of the cpu fist just to ensure there are no bridges before giving up on the card.
I got around 13ohm on my inner SP1 and SP2 connections, some other people getting around 18ohm
So im doing this with a friend and we both have oled zelda switches, both of them give OL on diode mode prior so if yours are fine I’ll continue on then i appreciate the reply thanks man!
Post automatically merged:
Unfortunately its not booting, im getting this LED code but I can’t for the life of me find a list of the codes to understand what it means.
-editing for proper video link the led code has changed
Last edited by johnkeykong,
Does the switch boot to OFW afterwards?
Looks like your switch blinks purple for a bit, then solid white light.
Unfortunatly, im not too sure what that error is
Here is a list of error codes I've compiled for the Instinct NX from sthetix's video.
| INSTINCT NX ERRORS | |
| FPGA error | Blinking red lights x 7-8 continuously for long time + then nothing (no OFW) |
| 3.3v disconnected | No signal + switch wont turn on |
| D point disconnected | Purple x 2 + Blinks white several times and boot to OFW |
| A point disconnected | Purple x 2 + Blinks white several times and boot to OFW |
| C point disconnected | Blinks purple for long time + red light blinking + OFW boot |
| B point disconnected | Purple x 2 + Blinks white several times and boot to OFW |
| CPU SP1 and SP2 disconnected | Blinks purple for long time + blue light 3 times + OFW boot |
Screen stays black no boot into OFW from what i can see its doing:Does the switch boot to OFW afterwards?
Looks like your switch blinks purple for a bit, then solid white light.
Unfortunatly, im not too sure what that error is
Here is a list of error codes I've compiled for the Instinct NX from sthetix's video.
INSTINCT NX ERRORS FPGA error Blinking red lights x 7-8 continuously for long time + then nothing (no OFW) 3.3v disconnected No signal + switch wont turn on D point disconnected Purple x 2 + Blinks white several times and boot to OFW A point disconnected Purple x 2 + Blinks white several times and boot to OFW C point disconnected Blinks purple for long time + red light blinking + OFW boot B point disconnected Purple x 2 + Blinks white several times and boot to OFW CPU SP1 and SP2 disconnected Blinks purple for long time + blue light 3 times + OFW boot
Red red
Green green green
White Purple
Purple purple
White for a while then stops.
Last edited by johnkeykong,
Hi y'all, I will install the black instinct v6 on my oled today, should I do something before installing it?
I mean, I asked the seller for any firmware update since I bought it 15 days ago, but the response was "firmware already installed".
As he's not selling it anymore, I don't have access to the tutorial in the Ali express item description, so I don't have any way to know if there are any new firmware updates.
Also I don't have the files to put in the SD card for Hekate and stuff, so i would appreciate if you can point me to a guide or something.
I mean, I asked the seller for any firmware update since I bought it 15 days ago, but the response was "firmware already installed".
As he's not selling it anymore, I don't have access to the tutorial in the Ali express item description, so I don't have any way to know if there are any new firmware updates.
Also I don't have the files to put in the SD card for Hekate and stuff, so i would appreciate if you can point me to a guide or something.
Similar threads
- No one is chatting at the moment.
-
-
-
@
Psionic Roshambo:
One thing that just occurred to me.... The sound on the 2600 sucked less back then the harsh sound we hear now is from infinitely better speakers we have now, back when the 2600 was new speakers produced a almost muffled sound, like CRTs made old graphics look slightly better. -
@
Psionic Roshambo:
I wonder if I could recommend that to some emulation devs that perhaps the sound could use some smoothing out to simulate those old TVs
-
@
Psionic Roshambo:
I think a few of the early systems could benefit from that, at least up to the 8 bit generation, by the 16 bit generation I think TVs had gotten a lot better in almost every way
-
-
-
-
-
-
-
-
-
-
@
Xdqwerty:
it says it only works for the original R4, R4i Gold (r4ids.cn), R4iDSN (r4idsn.com) and Acekard R.P.G. -
-
-
-
-
-
@
Psionic Roshambo:
Just give it a try, but honestly if you have a 3DS you can play DS games without a card just off the internal SD card
-
-
-
-
