Hacking SWITCH NOOB PARADISE - Ask questions here

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,984
Trophies
2
Age
29
Location
New York City
XP
13,312
Country
United States
What would be the next solution? Restoring a NAND backup? Feels like there is a bad save file that I wish I could find access to delete.

Does the new atmosphere have a "contents" folder any longer?
Did you try my idea of using the newest version of Atmosphere?
I just updated my CFW and FW to their latest versions using the rentry guide, but I am unable to boot into emummc through Hekate. When I try, it immediately goes into RCM mode, and injecting hekate again causes the following error message:

Panic occured while running Atmosphere.
Title ID: 0100000000000000
Error: UNK (0x6)

If I boot through fusee.bin, Atmosphere works fine. Does anyone know what I might have done wrong? I just migrated to a new sd card two days ago, but everything was working perfectly until I installed version 16.0.3 using daybreak. So far, I've tried using a completely fresh atmosphere folder, which didn't work.
How is your SD card formatted?
Hello, I'm on atmos 14 and waiting to update to 15.0.4 when it fully release. I've never done an update before so I have a few questions since I can't seem to find them on rentry page

1. Which old folder do I need to backup in case something go wrong?

2. I'm not sure if my CFW was installed to SD or internal storage (didn't install the old CFW myself)...is there a nifty way for me to check this since I don't want to put update files in wrong place?

3. I always use R4 dongle to boot into atmos. Do I have to update dongle too? Do I have to put fusee.bin inside the dongle instead of the Switch ?
  1. Always keep a backup of your Nintendo folder since that stores the data for all games stored on the SD card
  2. You cannot install CFW on the Nintendo Switch. CFW is just a bunch of files on your SD card
  3. Since the dongle sends the payload to the Switch, yes you have to update the dongle as well.
 

Crowla33R

Well-Known Member
Newcomer
Joined
Dec 16, 2022
Messages
50
Trophies
0
Age
44
XP
95
Country
United States
Did you try my idea of using the newest version of Atmosphere?

How is your SD card formatted?

  1. Always keep a backup of your Nintendo folder since that stores the data for all games stored on the SD card
  2. You cannot install CFW on the Nintendo Switch. CFW is just a bunch of files on your SD card
  3. Since the dongle sends the payload to the Switch, yes you have to update the dongle as well.

So which files on the dongle do I have to overwrite? The rentry isn't super clear on how to update the dongle.
 

waz

Member
Newcomer
Joined
Dec 27, 2022
Messages
14
Trophies
0
Age
25
XP
116
Country
United States
looks like something is going wrong on my emummc... on latest atmosphere with sigpatches. anybody got any idea if it's anything besides corruption? switch ran out of battery while in sleep mode and when I turned back on it will only boot to this

 

Husk4197

Member
Newcomer
Joined
Jun 6, 2023
Messages
7
Trophies
0
Age
43
XP
165
Country
Canada
Should of chise FAT32+eXFat
Yes, well, I didn't, which is how I came to be here. Any suggestions on how I might fix this problem?
Post automatically merged:

I just updated my CFW and FW to their latest versions using the rentry guide, but I am unable to boot into emummc through Hekate. When I try, it immediately goes into RCM mode, and injecting hekate again causes the following error message:

Panic occured while running Atmosphere.
Title ID: 0100000000000000
Error: UNK (0x6)

If I boot through fusee.bin, Atmosphere works fine. Does anyone know what I might have done wrong? I just migrated to a new sd card two days ago, but everything was working perfectly until I installed version 16.0.3 using daybreak. So far, I've tried using a completely fresh atmosphere folder, which didn't work.
You sir have helped me without even trying! Thank you for giving me the idea to try using Fusee to boot my switch! It works! I have a similar problem where I tried updating using daybreak and it broke my switch when I try to boot to CFW -emuMMC through Hekate my switch hangs. But through fusee it boots just fine and my version is 16.0.3 AMS 1.5.3|E . Now the next step is how do I back up all my saves and whatnot in the event this thing crashes again?
 
Last edited by Husk4197,

Shadow#1

Wii, 3DS Softmod & Dumpster Diving Expert
Member
Joined
Nov 21, 2005
Messages
12,341
Trophies
2
XP
7,981
Country
United States
Yes, well, I didn't, which is how I came to be here. Any suggestions on how I might fix this problem?
Post automatically merged:


You sir have helped me without even trying! Thank you for giving me the idea to try using Fusee to boot my switch! It works! I have a similar problem where I tried updating using daybreak and it broke my switch when I try to boot to CFW -emuMMC through Hekate my switch hangs. But through fusee it boots just fine and my version is 16.0.3 AMS 1.5.3|E . Now the next step is how do I back up all my saves and whatnot in the event this thing crashes again?
Hekate not work because your hekate_ipl.ini isnt correct then
 

Bonovox40

Well-Known Member
Member
Joined
Apr 2, 2003
Messages
578
Trophies
2
XP
1,340
Country
United States
TL;DR: instinct switch freezes mid game, or black screens after Atmosphere logo, after working fine for weeks. Related error code: 2105-0602. Error happening on Latest public atmosphere version, as well as previous version before he updated Atmos.

Friends new Instinct modded OLED was working fine for a couple weeks. (Was setup with a donated 256 gb SD card I previously used in my switch for about a year, before upgrading to 512gb).
So now when he's playing games like Zelda, Mario kart, etc and the games will freeze up mid game, title screen, anywhere. Sometimes he has to hold power for 15 seconds and when it reboots, usually gets to atmosphere logo and then endless black screen when the Nintendo logo is expected. Sometimes after a few reboots, he will eventually get back into the switch home screen.
He has once or twice gotten this atmosphere error before the freezes became daily: https://i.postimg.cc/ZK5gVR71/Screenshot-20230606-200305-Messages.jpg

Hoping this just indicates an SD card problem, Rather than something wrong with the chip or the switch, (Or emummc?) but have found hardly any info on that error code.

He has tried replacing atmosphere/Hekate/fusee files with the latest using rentry guide, and didn't really change anything. He hasn't messed w themes or homebrew apps.
I told him in the meantime to get a new SD card and set it up to test and see if he can get it to consistently boot into atmosphere, and then copy the old data to the new card as it's in file format. Any suggestions what might be the issue cause? Thanks all!
 

medi01

Well-Known Member
Newcomer
Joined
Jul 9, 2018
Messages
45
Trophies
0
Age
74
XP
119
Country
Germany
Thanks for the link but it doesn't answer any of the questions asked. eMMC also contains older version of the OS, emunand is way ahead.

Post automatically merged:

Use emutool, convert hidden partition emunand to file base, then convert it back to hidden partition.
You mean on switch or on PC?

Running it on PC now, seems to be very slow compared to DD.



Note that emu nand is booting fine. What doesn't work is path to the Nintendo/contets (for games installed on SD).



I've also noticed curious effect, in hekate:

"Change emuMMC" changes path to "HPE0".
"Fix raw" changes it to "RAW1".

What determines whether path is RAW1 or HPE0? :((((

I've tried putting Nintendo/... folders in both, no luck.


Tried installing new title via DBI and... it fails to install (perhaps I'm installing game that was installed already).
 
Last edited by medi01,

alipc09

New Member
Newbie
Joined
Jun 7, 2023
Messages
1
Trophies
0
Age
26
XP
7
Country
Netherlands
I have a modchip installed on my Nintendo Switch and I'd like to know the best route of avoiding a ban.
I want to play my official purchased games on my OFW and use homebrew apps on my CFW but what would be the best course of action?
 

a_username_that_is_cringe

the one person who did something one time
Member
Joined
Apr 22, 2023
Messages
516
Trophies
0
Location
gbatemp. where do you think you are
XP
736
Country
United States
I have a modchip installed on my Nintendo Switch and I'd like to know the best route of avoiding a ban.
I want to play my official purchased games on my OFW and use homebrew apps on my CFW but what would be the best course of action?
Use emummc for homebrew, and use stock for emmc. clear out your serial number for emummc. that's the best course of action for now. 90dns isn't trustworthy to most people, so don't just use that.
 

lepas33

New Member
Newbie
Joined
Feb 4, 2020
Messages
1
Trophies
0
Age
47
XP
56
Country
France
Hi there !

I'm a big noob, I've tried to figure out to solve my problem by myself but I've failed.

I've an oled and I've got an hwfly installed with hekate, emmc, atmosphere. All was working fine for months. I figured to upgrade to 16.0.2 and all was still fine.

One week ago, I wanted to change langage in cfw mode. Crash.
Reboot on hekate but black screen on cfw boot. Ofw still ok.
Then reboot on cfw, black screen.
Then reboot and nothing ! Hekate doesn't load, black screen and green/orange light from the inside.

I've tried :
- different starts : power +, -, both (with a long press on power to make a real shutdown)
- rebuild my sd card, buy and build a new one

There is a green light on the switch support when I put the console so I guess it's not an alimentation problem too.

The one who installed the chip is in vacation for a couple weeks so if you have any idea to help without opening the console I would be happy to try them.

Thanks a lot

Edit : the last thing I wanted to try was to empty the battery by being stuck for days on the black screen while green and orange lights flashing. Good idea ?
 
Last edited by lepas33,

Ricetomeetyou

Well-Known Member
Newcomer
Joined
Nov 17, 2022
Messages
53
Trophies
1
Age
38
XP
107
Country
United States
If DBI and JKSV are programs that I can manage saves while I can boot into CFW, are there any programs that can do the same in my case where atmosphere will not load? I don't know what options I have other than to delete the corrupted save somehow, or else doing a full system wipe which I am not familiar with. I have a backup NAND on my computer with 7 files in addition to BOOT 0 AND BOOT 1 files but since I did the backup quite a few months ago, I had since upgraded the switch firmware as well as the custom firmware. I don't know if that would become an issue. Maybe just starting over, redoing all my games, and importing the saves from JKSV is my best bet... (And maybe backing up the NAND every week or so)
 

Lassik

Well-Known Member
Member
Joined
Nov 19, 2010
Messages
100
Trophies
1
XP
166
Country
United States
I have a question on save files. So I have a switch that I was originally playing on that is not using CFW. I was playing TOTK on there. I got really far. Now I have this new switch that is running CFW. I'm running off SD via emuMMC.

I want to get my TOTK save data over from my legit switch over to my one using CFW. I pulled the SD, loaded back up in to OFW, linked the new switch and did a legit save transfer. It worked.

Now I put everything back on the switch the way it was with CFW but my save is not there. Likely because i'm running emuMMC and that save is stored on the system.

My question is, how can I get that save over to the emuMMC. I see a folder in the "emuMMC/RAW1/Nintendo/save". My assumption is that I just have to find it and put it in this folder and i should be good. I can't figure out where the legit save is though to move it.

I tried to download checkpoint.nro but it didn't run. the screen flashes, the checkpoint folder gets created and then goes away. So that didn't help.

Another issue I have is that I played TOTK for a little bit on this CFW switch so it has it's own save file. I loaded JKSV and it sees that save but not the one from the other switch that i want to use.

Sorry if this is all confusing. I'm equally confused.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: Sorry for accidentally bending over