That is not for the xiao rp2040, it's my understanding there is no RCM injection firmware for the rp2040 (yet
) )
If its only for one time use, the magnifying headband will get the job done.
If you plan to work on smd more often, then a microscope should be considered.
Hello everyone asking can i use switch lite flex on switch oled for picofly? Is this working or nah? Anyone already try this? TIA 
Attachments
Last edited by darviral,
i didnt use it, with a bit of patient and good lighting
except u want soldier mosfet i think it need good magnifying lenses
Yeah, It's a bit annoying, I plan to get a microscope soon. Anyway, I can take really close images from my phone (see example, it's the rst pin), but for this project I consider microscope a must have.
Attachments
Yeah works.Hello everyone asking can i use switch lite flex on switch oled for picofly? Is this working or nah? TIA
Wow, great job if you managed to soder those with just a magnifying glass.
What I did was that I put the phone in recording mode with flash on ( so the screen won't shut off and the light stays on). Then suspended the phone on top of 2 soda cans and worked my way with solder in pcb. Midway through this I orderd a microscope because I was not sure I will be able to finish the work since I was knocking my phone over with the solder every 20seconds
hello everyone, im interested in doing this install. i have a v1 trinket switch and have been reading about the rp2040 zero install but dont know how to start. im looking to buy a oled switch and am wondering if a certain version is better than another. also which version hwfly flex cables are best for oled? any advice is much appreciated.
It's best if you could find a Oled Switch that usees a non Toshiba/Kioxia EMMC but I dont think there is a way to know what Emmc chip is used without disassembling the console.
Even if you get (un)lucky and get an Oled with Toshiba, @rehius fixed this with the latest firmware so you should be OK.
As for the cables, any cable with the vertical connection for SP1 and SP2 will work (so Core cables, Lite Cables, Oled cables, all of them apart from V1).
Attachments
thanks for the info. would a v4.1 hwfly flex cable set do? do i need a dat0 adapter? sorry for the all the questions. im trying to order a set and would like the right one
Last edited by idSkeetOnU,
You are right, you do need a dat0 adapter for Oled. Get the yellow one with 4 anchor points, it is much more reliable than the black ones.
And yes, the v4.1 works. As I said, as long as the SP1 and SP2 pads are in vertical position you are good to go.
Since (i guess) it's your first mod I would suggest you go with the hwfly from aliexpress. com/item/1005004097100564.html?spm=a2g0o.detail.1000023.9.209c402bptEpi2
The price is ok now and its much easier to work with that picofly at this stage.
Last edited by QuiTim,
Hello everyone asking can i use switch lite flex on switch oled for picofly? Is this working or nah? TIA
ahh nice to know thanks
I often see people saying that they have recently broken their NAND or boot0, but what is the mechanism behind this happening? It might be a good idea to compile a list of things to be aware of to prevent this from happening. What do you think?
- Joined
- Jan 22, 2014
- Messages
- 248
- Trophies
- 1
- Age
- 40
- Location
- Cape Town, Western Cape
- XP
- 1,810
- Country
People not using resistors causes boot0 issues
I've done my 2 oleds and a v2 using these that I borrowed
just ordered a microscope as I've been putting it off for years
Similar threads
-
-
-
-
-
-
@
K3Nv2:
I'm beefing with a neighbor currently each time I ask him for help with something he makes bs excuses then ignores my calls text but seems to randomly speak when I'm done with the project after doing things to help him -
@
RedColoredStars:
DiGiorno Crispy Pan Pizza tasted pretty dang close to Pizza hut pan pizza, but Im not sure if theyve been discontinued or not. Havent seen them locally for a couple of months now. -
-
-
-
-
-
@
RedColoredStars:
Never even seen a tiger crust pizza in any stores around here. Walmart, Cub, or otherwise.
-
-
-
@
RedColoredStars:
Last thing I told her is how much I love her, and that Im not leaving her there forever and I promise to come back and take her back home with me.
-
-
-
@
Black_Manta_8bit:
hello, anyone is able to create cheat patches for cemu? i have a simple request if anyone can help -
-
-
-
-
-
