Hacking Hardware Picofly - a HWFLY switch modchip

NetYaroze

Member
Newcomer
Joined
Mar 30, 2023
Messages
22
Trophies
0
Age
36
XP
95
Country
Germany
Hi everyone! I'm new here.

It's not clear to me what to do after picofly starts the first time. Is there a guide that explains what to insert in the micro sd after the "NO SD" message is on the switch?
 
  • Like
Reactions: Donnie-Burger

MHHHM

New Member
Newbie
Joined
Feb 23, 2023
Messages
3
Trophies
0
Age
50
XP
152
Country
United States
pico.jpg
 

JackFrostSMT

Well-Known Member
Member
Joined
Jan 18, 2017
Messages
102
Trophies
0
Age
28
XP
270
Country
United States
Does someone have an altered HATS PACK for picofly? still bit confused on sigpatches/bin/etc. thank you <3
HWFLY uses payload.bin like picofly right? If so then its 100% compatible.
Post automatically merged:

Also, I seem to be experiencing emmc slow mode issues now with 47ohm, whats a good safe higher resistance?
 
  • Like
Reactions: Dandan0404

abal1000x

Well-Known Member
Member
Joined
Jun 5, 2022
Messages
1,041
Trophies
0
XP
1,321
Country
Gaza Strip
We need 2 mosfet at sp1 and sp2.
I don't understand the function of the mosfet.

Is it some kind of switch (of Drain Source) that could be controlled from the rp2040 programatically via the gate pin?
 

Flasheure

Active Member
Newcomer
Joined
Dec 19, 2020
Messages
31
Trophies
0
Age
65
XP
137
Country
France
I've read it a couple of times in the previous posts that the resistors need to be 0805 or smaller. I don’t know if this matters but I just wanted to point it out since it seems that this mod is way too sensitive and small variations are creating very different outcomes. Cheers
It has nothing to do with value.
It’s just the dimensions.
Post automatically merged:

cms.png

I wasn't really active in the Switch scene for months now.
So Picofly allows Modding of OLED Switches and Switch Lites, right?
Is there a Guide on how to do that?
hi
Yes everything is said in this subject...
Start with page 1
Post automatically merged:

Hi everyone! I'm new here.

It's not clear to me what to do after picofly starts the first time. Is there a guide that explains what to insert in the micro sd after the "NO SD" message is on the switch?
hi
You need to install Atmosphere, Hekate..... on SD
And if you’re in fw 15.0.1, here’s what you need:
Pack 15.0.1
install
Pack 16.0.1
 
Last edited by Flasheure,

JackFrostSMT

Well-Known Member
Member
Joined
Jan 18, 2017
Messages
102
Trophies
0
Age
28
XP
270
Country
United States
Also, I seem to be experiencing emmc slow mode issues now with 47ohm, whats a good safe higher resistance?
Interesting, having 94 ohm on D0 and CMD is fine, but put CLK on 94ohm and I get orange D0 blink. Hopefully just having D0 and CMD at higher resistance will solve the slow emmc issue.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: Sorry for accidentally bending over