Why in one photos are soldering only a pin and in anothers are both pins soldered?
(Sorry for my english)
Why in one photos are soldering only a pin and in anothers are both pins soldered?
help i'm really desperatehello, I was finally able to boot the chip, check the soldering and that's it, but now I wanted to test OFW, check that the connection between the points and the pico fly have 47ohm resistance. I don't know what else I could check pkg1 decryption failed bek is missing
Try this "copy" both firmware & Unlock UF2 files at once. You must copy one file, reconnect rp2040, then flash another file.help i'm really desperate
Didn't the Kioxia work fine right of the bat with fw 2.5?Super thanks
My switch lite's EMMC chip is this one
View attachment 361803
After using the new firmware you released, it works fine
Before updating this Toshiba-specific firmware has been a blue light blinking and not working.Didn't the Kioxia work fine right of the bat with fw 2.5?
You need to run the unlock.bin but backup boot0 firsthelp i'm really desperate
huh... maybe Kioxia are also annoying little buggers. Oh well, thankfully it solved with the pre-2.6 patch then.Before updating this Toshiba-specific firmware has been a blue light blinking and not working.
Let me know if you figure it out. I'm trying to rebuild my boot0/1 and nand once I have time away from workI love the same thing also happened to me with Toshiba nand I installed the rp2040 resistors with the unlocking and it gave me that same error without counting that it does not let you extract the keys and when it happened to the original console it gave this error
Try this "copy" both firmware & Unlock UF2 files at once. You must copy one file, reconnect rp2040, then flash another fil
Hello, thanks for answering, I did what they told me but it didn't work, it doesn't enter OFW, it doesn't let me dump the profinfo with lockpick either, although I was able to make a backup of the nand but it's probably also damaged, I don't know what else to do, the Console was working perfectly before installing the chip, I probably damaged the OFW, I don't know how to recover it, I'm going to cryYou need to run the unlock.bin but backup boot0 first
Hello, thanks for answering, I did what they told me but it didn't work, it doesn't enter OFW, it doesn't let me dump the profinfo with lockpick either, although I was able to make a backup of the nand but it's probably also damaged, I don't know what else to do, the Console was working perfectly before installing the chip, I probably damaged the OFW, I don't know how to recover it, I'm going to cry
Are we shit out of luck if the backup was made after the unlock was done?You need to run the unlock.bin but backup boot0 first
Kioxia is a rebranded Toshiba.Didn't the Kioxia work fine right of the bat with fw 2.5?
Are we shit out of luck if the backup was made after the unlock was done?
Ah okey, that explains itKioxia is a rebranded Toshiba.
Hello! Don't tell me when the new firmware version 2.6 will be released?
Hopefully soon since this dang encryption....Hello! Don't tell me when the new firmware version 2.6 will be released?
Can't post links yet, search google for "factory reset kb2040"Hopefully soon since this dang encryption....
Can't rush perfection though
Post automatically merged:
BTW does anyone know a way to clear the rp2040 entirely including the persistent unlock? I read what people were saying about corrupting boot0 after unlock and didn't want to poison my backups. Though I've already flashed the 2.5+unlock and will eventually flash 2.6 in the future.