Nintendo switch Lite green but nothing on screen
Post automatically merged:
Can i get some help pls
Currently youd need to solder the usb back on but 2.6 aims to add updating function
Damn, its working! I use Dat0 - 330 ohms, clk - 75 ohms, cmd - 75 ohms, rst - 20k.
I did it and indeed it was red after the blue flashing, I flashed the 2.5 Toshiba+ unlock but the same thing keeps happening only in the end it is now red.
most people uses magnet wire for data and AWG 30 for voltage.
I personally use 34awg magnet wire as impeeza said, and yea 30awg for power
Needs to be right next to the apu. Would interfere with timing not to mention youd be running thick wires underneath the apu shielding. Thick wire inside the shielding to the mosfet then you run a small wire from the gate of the mosfet to the rp2040
answered several times before, the mosfet must be closest to cap as possible in order to avoid eddy currents and timing issues.
@
K3Nv2:
@
RedColoredStars:
@
RedColoredStars:
@
RedColoredStars:
@
Black_Manta_8bit:
