I think that eventually it does not matter as Hekate will pick it up from the sd card if the one in the sd card is newer. I might be mistaken though, but I think this is how it works with my (unfortunately) cloned one. The guys in this community are really good at preventing thingsYea that what i meant with issues. But I also read that if you put an update.bin in the bootloader folder that it would always default back to that version regardless of how outdated the existing payload is in the dongle. I just hope someone could confirm that for meElse I have to search for a different dongle eventually.
At least try it first like that before ordering another one.
fijn weekend
I just got my hands on a unpatched switch. I haven’t done too much research yet but I’m looking to get the freeShop on it.
Which guides should I be following, the one to install atmosphere?
I see Tinfoil mentioned in places, does that come after installing atmosphere?
If I use a 128GB memory card to start with, can I upgrade to a larger one by simply copying and pasting all the contents from one to the other?
Thanks
Which guides should I be following, the one to install atmosphere?
I see Tinfoil mentioned in places, does that come after installing atmosphere?
If I use a 128GB memory card to start with, can I upgrade to a larger one by simply copying and pasting all the contents from one to the other?
Thanks
https://rentry.org/SwitchHackingIsEasy
You can follow rentry, Atmosphere doesn't come with sig patches or Tinfoil so you have to look for them seperately, if you decide to use an hidden paritition emunand, you need to convert that to file base before you can move the emunand to a new card, it is best to get the correct size of space you want.
Watched a video tutorial and noticed some people commenting about Tinfoil giving them an error. Replies were saying that they needed sig patch. Is that the only thing I need to install before installing Tinfoil?
You needs sig patches to run homebrews and pirated games, shouldn't use a youtube video as guide, stick to a written guide.
If you plan to keep sysnand clean for online play then create an emunand and proceed from there. Also if you care about the fuse for downgrade purposes then use autorcm.
To switch between emunand and sysnand, I need to inject the payload by connecting the Switch to the PC, right? If I select emunand once, will it always boot into emunand?
You could use the reboot to payload method, so you reboot to hekate. Or you can use this to boot into hekate.
https://github.com/suchmememanyskill/Payload_Launcher
. I’ll hack the console and come back to this.
I know this is me being dumb but I mostly play my hacked switch oled in handheld mode, and aside from going in to tinfoil every now and again I have all wireless connections off to be safe from Nintendo's servers. But today I decided to play in the dock and I can't figure out how to stop it connecting from the internet without actually deleting my internet completely. It says flight mode isn't available.
How do you play in docked mode and stop it connecting to the internet?
How do you play in docked mode and stop it connecting to the internet?
Hello, I've Done my research for a month or 2 now(hehehe). I think I already mastered the Installation process(watching videos) but regarding for the POST and PRE installation, I'm having a little trouble. I will be installing the Picofly in probably next 2 weeks(when it arrives) on a expert cellphone shop(expert micro solder technicians) and I need corrections if I have one so Kind Ma'am And Sir please help me and thank you so much in advance...
Im afraid to brick my only switch so preparation is key
Materials:
RP2040 zero
36awg teflon wire
47 Ohms SMD resistor 0603(couldnt get 0805)
DAT0 Yellow 4 anchor variant (stethix said this is the best/no reball=no problem[?] )
Flex cable (mosfet too risky)
OLED switch
used in Nswitch, with legit download free games from eshop - 256gb Sandisk card
--------------------------
PRE-install:
-reformat 256gb card to Fat32
-skipping format sd card on legit switch
-put HATS pack by sthetix on clean formatted FAT32 sd card (PC +card reader)
-flash pico with 2.5+ unlock.uf 4mb by Vittorio
-remove buttons and USB C
-flex cable solder ONLY THE 2 MIDDLE or 3RD AND FOURTH pins
INSTALLATION:
-gonna follow this by sthetix also backing up with this by modsville USA and refering to the three pictures attached
POST-install: this is the confusing part for me!!!
-gonna follow this by sthetix
- i dont know if atmosphere is already installed
-assuming i followed the video properly i should have SYSMMC and EMUMMC like in the picture. where is OFW ?
-is prod keys and title keys installed already like yuzu?
-how to Dual boot? like OFW and CFW EMUMMC . i researched but sthetix video regarding dual boot was RED OS not Hekate?
-how to ban prevention (probably gonna research this later)
-where to put downloaded 200gb XCI/NSP games and DLC?
Things I have not fully understand and Might be wrong (correct me):
-RED OS = SX OS? , BLUE OS = HEKATE? - based form stehtix video
-ONLY play in EMUMMC
-XCI and NSP doesnt matter
For all who made it here, thank you and i apologize for my noobness. thank you and may you have Peace and Prosperity
Im afraid to brick my only switch so preparation is key
Materials:
RP2040 zero
36awg teflon wire
47 Ohms SMD resistor 0603(couldnt get 0805)
DAT0 Yellow 4 anchor variant (stethix said this is the best/no reball=no problem[?] )
Flex cable (mosfet too risky)
OLED switch
used in Nswitch, with legit download free games from eshop - 256gb Sandisk card
--------------------------
PRE-install:
-reformat 256gb card to Fat32
-skipping format sd card on legit switch
-put HATS pack by sthetix on clean formatted FAT32 sd card (PC +card reader)
-flash pico with 2.5+ unlock.uf 4mb by Vittorio
-remove buttons and USB C
-flex cable solder ONLY THE 2 MIDDLE or 3RD AND FOURTH pins
INSTALLATION:
-gonna follow this by sthetix also backing up with this by modsville USA and refering to the three pictures attached
POST-install: this is the confusing part for me!!!
-gonna follow this by sthetix
- i dont know if atmosphere is already installed
-assuming i followed the video properly i should have SYSMMC and EMUMMC like in the picture. where is OFW ?
-is prod keys and title keys installed already like yuzu?
-how to Dual boot? like OFW and CFW EMUMMC . i researched but sthetix video regarding dual boot was RED OS not Hekate?
-how to ban prevention (probably gonna research this later)
-where to put downloaded 200gb XCI/NSP games and DLC?
Things I have not fully understand and Might be wrong (correct me):
-RED OS = SX OS? , BLUE OS = HEKATE? - based form stehtix video
-ONLY play in EMUMMC
-XCI and NSP doesnt matter
For all who made it here, thank you and i apologize for my noobness. thank you and may you have Peace and Prosperity
Attachments
If you turn on flight mode in handheld mode (and keep Bluetooth connectivity on) and put it back in the dock it should stay in flight mode. But if you turn flight mode off in docked mode you have to turn it back on in handheld mode again.
Did anyone release a proper guide or a video of installing the RP2040 Zero/One with the Hwfly flex cable on a V2 switch? Can't really find a source in English and dunno where to start from.
Might actually consider to get an instict/HWFLY chip, picofly seems to take too much effort for the price difference.
Might actually consider to get an instict/HWFLY chip, picofly seems to take too much effort for the price difference.
easy answer: disconnect the ethernet cable on the back of your dock.
more complex with a bit of risk: https://rentry.org/ExosphereDNSMITM
So, I have an (I believe fake) RCMloader, I put yesterday the hekate 6.0.2 in the first folder and I have updated hekate and atmosphere and sigpatches in my sd card. They all work as they should. Whatever the dongle is injecting (I suppose a very earlier version of the hekate), it can launch the latest hekate 6.0.2
I will not try the 6.0.1 then
Edit: You are right, I had an older version of hekate in the \bootloader\update.bin. I just realized that. Sorry for the confusion.
-
-
-
-
-
@
RedColoredStars:
Never even seen a tiger crust pizza in any stores around here. Walmart, Cub, or otherwise. -
-
-
@
RedColoredStars:
Last thing I told her is how much I love her, and that Im not leaving her there forever and I promise to come back and take her back home with me.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
