RP2040-zero uses same winbond W25Q16JVUXIQ flash as rpi pico i believeDoes this firmware require an RP2040 board with a larger capacity Flash?
Post automatically merged:
The default flash for RPI PICO is only 2MB in size
RP2040-zero uses same winbond W25Q16JVUXIQ flash as rpi pico i believeDoes this firmware require an RP2040 board with a larger capacity Flash?
Post automatically merged:
The default flash for RPI PICO is only 2MB in size
yesRP2040-zero uses same winbond W25Q16JVUXIQ flash as rpi pico i believe
use POGO PIN?Smaller diameter PINs are available.if we broken USB type C port, how should we do to flash the firmware ??? another method ???
Only 3 PINs are required to connect to USBuse POGO PIN?Smaller diameter PINs are available.
use POGO PIN?Smaller diameter PINs are available.View attachment 361046
Post automatically merged:
Only 3 PINs are required to connect to USB
USB D+
can you point that in the rp2040 board ???use POGO PIN?Smaller diameter PINs are available.View attachment 361046
Post automatically merged:
Only 3 PINs are required to connect to USB
USB D+,USB D-,GND
你能在RP2040板???中指出这一点吗?
The premise of this is that the RP2040 has a 3.3V supply inside the NS.
Maybe it's for sale on AliExpress? I can buy it locallyType C pins are 0.254mm wide approx, not sure you get pogos that small tbh
it looks really thin, you could probably find/make space in the oled somewherehttps://www.kubii.it/micro-controleurs/3421-scheda-breakout-rp2040-3272496307735.html
does it fit in the oled?
normal rp2040 does not fit?it looks really thin, you could probably find/make space in the oled somewhere
don't have an oled, but i believe the pico-zero board could fit in too, but only if the buttons and usb c port are removednormal rp2040 does not fit?
Why is the firmware and unlock firmware in PDF extension? It needs to renamed to .bin right?
Probably a very dumb question (never messed with this tbh), but how fits the 4MB bin file into a 2MB Pico-Zero flash storage?this works for everyone
forum software only allows uploads of certain file extensions. As noted, rename to .uf2Why is the firmware and unlock firmware in PDF extension? It needs to renamed to .bin right?
Broken how? as long as you have at least the D+, D-, 5V, & GND lines on the board you can wire to it.if we broken USB type C port, how should we do to flash the firmware ??? another method ???
Sadly it seems to be software locked. I guess zip files work still?forum software only allows uploads of certain file extensions. As noted, rename to .uf2