Hacking SWITCH NOOB PARADISE - Ask questions here

Blakejansen · Feb 7, 2023

binkinator said:
right, we will need to take 90DNS out of the picture completely and only use dns:mitm for protection. That way (we hope) your switch will get the same results as your Mac.

Already have DNS:mitm, it looks like this:

# Block Nintendo Servers
127.0.0.1 *nintendo.*
127.0.0.1 *nintendo-europe.com
127.0.0.1 *nintendoswitch.*
95.216.149.205 *conntest.nintendowifi.net
95.216.149.205 *ctest.cdn.nintendo.net

I am just worried that the mitm could fail. I also have working exosphere since I can see my serial number is blanked out. In theory, if dns:mitm fails would exosphere keep me safe? I don't want to get banned....

binkinator · Feb 7, 2023

Blakejansen said:
Already have DNS:mitm, it looks like this:

# Block Nintendo Servers
127.0.0.1 *nintendo.*
127.0.0.1 *nintendo-europe.com
127.0.0.1 *nintendoswitch.*
95.216.149.205 *conntest.nintendowifi.net
95.216.149.205 *ctest.cdn.nintendo.net

I am just worried that the mitm could fail. I also have working exosphere since I can see my serial number is blanked out. In theory, if dns:mitm fails would exosphere keep me safe? I don't want to get banned....

dns:mitm is built into Atmosphere (as is Exosphere.) If you trust SciresM to code Atmosphere...you could make the jump that he's done equally well on dns:mitm and exosphere. I've been using both for over a year and have not heard of any failures.

Right now you're not able to resolve regular servers and I suspect it's due to the way you have DNS setup. It's not on your network as proven by your Mac. To test, we need to ensure the data you have above is in the /atmosphere/hosts/default.txt file and that you have exosphere.ini set up according to the doc I sent over.

keine · Feb 7, 2023

Can the switch modchip D0 point on the oled be done in a solderless fashion? Or does the install require a heatgun of the emmc area with adapater slid into place?
The eMMC D0 adapter is a hard requirement for oled, correct?

Why does the mod chip need to stay in place after first glitch? I'm assuming the current hack is required on every boot? Is that do to the boot0 code being immutable?

binkinator · Feb 7, 2023

keine said:
Can the switch modchip D0 point on the oled be done in a solder less fashion?

It can but without hard soldering a wire in place or at least reflowing, you're dependent upon friction to keep your electrical connectivity.

keine said:
The eMMC D0 adapter is a hard requirement for oled, correct?

Well, you could also remove the chip and hard solder a wire in place but you're probably looking for less intrusive, not more.

keine said:
Why does the mod chip need to stay in place after first glitch? I'm assuming the current hack is required on every boot?

Yes, there is no permanent hack. Use sleep mode and you'll be OK. If you completely shut down or reboot it requires a new glitch from the modchip to establish CFW.

Blakejansen · Feb 7, 2023

binkinator said:
dns:mitm is built into Atmosphere (as is Exosphere.) If you trust SciresM to code Atmosphere...you could make the jump that he's done equally well on dns:mitm and exosphere. I've been using both for over a year and have not heard of any failures.

Right now you're not able to resolve regular servers and I suspect it's due to the way you have DNS setup. It's not on your network as proven by your Mac. To test, we need to ensure the data you have above is in the /atmosphere/hosts/default.txt file and that you have exosphere.ini set up according to the doc I sent over.

I set DNS to automatic in my network settings on my switch. 90DNS Tester is showing all my connections to Nintendo are blocked. Is it safe to say that dns:mitm is working?

binkinator · Feb 7, 2023

Blakejansen said:
I set DNS to automatic in my network settings on my switch. 90DNS Tester is showing all my connections to Nintendo are blocked. Is it safe to say that dns:mitm is working?

Yes. Now it says blocked instead of unresolved. It’s working perfectly. :-)

now we can try tinfoil again.

Blakejansen · Feb 7, 2023

binkinator said:
Yes. Now it says blocked instead of unresolved. It’s working perfectly. :-)

now we can try tinfoil again.

Tinfoil is working perfect. Unresolved just means connection time out right? Want to make sure I didn't get connected to Nintendos servers. I am done using 90DNS, don't see the use for it since this is working out great.

binkinator · Feb 7, 2023

Blakejansen said:
Tinfoil is working perfect. Unresolved just means connection time out right? Want to make sure I didn't get connected to Nintendos servers. I am done using 90DNS, don't see the use for it since this is working out great.

Glad you’re sorted!

Correct…unresolved means no answer. Blocked mean it got an answer but it doesn’t work.

cieloo · Feb 8, 2023

hello...sorry if this has been mentioned before, do i need to do any backup before updating my firmware to 15.0.1? (currently running 14.1.2). I I already update sigpatches, hekate, and atmosphere to latest. Just pause a bit before i update the firmware using daybreak to ask this.

Regards
Cieloo

Urbanshadow · Feb 8, 2023

So I have an RP2040Zero coming my way. Would I be able to do something to my stock switch? If not I will use it to improve my flight simulator deck

Draxzelex · Feb 8, 2023

cieloo said:
hello...sorry if this has been mentioned before, do i need to do any backup before updating my firmware to 15.0.1? (currently running 14.1.2). I I already update sigpatches, hekate, and atmosphere to latest. Just pause a bit before i update the firmware using daybreak to ask this.

Regards
Cieloo

You don't need to backup anything before updating your firmware. You just simply update it like normal. If you haven't already done so, you should definitely dump your eMMC via Hekate but it is not a requirement for updating the firmware; it is something that you should always have on hand in case your device is bricked.

binkinator · Feb 8, 2023

Urbanshadow said:
So I have an RP2040Zero coming my way. Would I be able to do something to my stock switch? If not I will use it to improve my flight simulator deck

Close, but nothing yet.

https://gbatemp.net/threads/pikofly-a-probably-fake-hwfly-modchips-or-not.622701/

Urbanshadow · Feb 8, 2023

binkinator said:
Close, but nothing yet.

https://gbatemp.net/threads/pikofly-a-probably-fake-hwfly-modchips-or-not.622701/

So that thread was state of the art. I thought I was missing something or I had not the updated info. Thank you. Rotative encoders for the flight panel it is. If it reaches somewhere, I will reflash it.

Dust2dust · Feb 8, 2023

binkinator said:
I had to phone a buddy at Nintendo to find out the backstory on this so you kinda owe me one. Anyway, he said they talked about WPS for a while and even had plans drawn up to implement it but forgot about it until the last day before launch. They finally found the plans but apparently Itsuki had spilled bean dip on them and they were unreadable. Itsuki was ultimately fired for his carelessness and ever since everyone at Nintendo has been reluctant to redo the plans for fear it would bring them the same fate. To this day it‘s called the Itsuki WPS curse. Ask anyone you know who works at Nintendo and they will immediately know what you’re talking about.

That or there wasn’t enough demand for it to warrant the additional cost/licensing/components or what have you. X+Y<Z

I like the first explanation better.

Ricetomeetyou · Feb 8, 2023

When trying to play a "backup game" of Just Dance I'm getting a 2155-8007 error when the game tries connecting to Ubisoft connect. It tells me I need to select an account. In tinfoil, I already have the fake account activated and it still happens. This also happens when I am on WiFi (using correct DNS settings from reentry guide) or if I activate airplane mode. No other games have issues it seems. I've read about some Linkahlo app but it seems like it would do the same thing tinfoil is supposed to do. Anyone know a solution?

Current Version: 15.0.1/AMS 1.4.0/E

Dust2dust · Feb 8, 2023

Ricetomeetyou said:
When trying to play a "backup game" of Just Dance I'm getting a 2155-8007 error when the game tries connecting to Ubisoft connect. It tells me I need to select an account. In tinfoil, I already have the fake account activated and it still happens. This also happens when I am on WiFi (using correct DNS settings from reentry guide) or if I activate airplane mode. No other games have issues it seems. I've read about some Linkahlo app but it seems like it would do the same thing tinfoil is supposed to do. Anyone know a solution?

Current Version: 15.0.1/AMS 1.4.0/E

Are you referring to Just Dance 2023? Some people got it working, I believe. Take a look at this thread.
Or tag user @w350922439 directly if you prefer.

Ricetomeetyou · Feb 8, 2023

Dust2dust said:
Are you referring to Just Dance 2023? Some people got it working, I believe. Take a look at this thread.
Or tag user @w350922439 directly if you prefer.

That's the one. Can't believe I didn't see this thread. I'll take a look. Thanks!

6adget · Feb 8, 2023

I'm sure this has been answered on the forums, so many times you all are prolly sick of this question. I have a hacked switch. Bought it shortly after they first started selling them. A while back, the SD card died. It has been a long time since I hacked it, so I can't remember all the steps. I have it running on CFW again, and it works great. However, it will no longer play my game backups. I remember that there were a couple of files needed to play backups, but I cannot remember the file names and where to put them on the card. By that I mean do they go in the root of the SD card, or a sub folder? I'm not asking where to get the files. Just the names and where to put them. Thanks in advance for any help.

Hayato213 · Feb 8, 2023

6adget said:
I'm sure this has been answered on the forums, so many times you all are prolly sick of this question. I have a hacked switch. Bought it shortly after they first started selling them. A while back, the SD card died. It has been a long time since I hacked it, so I can't remember all the steps. I have it running on CFW again, and it works great. However, it will no longer play my game backups. I remember that there were a couple of files needed to play backups, but I cannot remember the file names and where to put them on the card. By that I mean do they go in the root of the SD card, or a sub folder? I'm not asking where to get the files. Just the names and where to put them. Thanks in advance for any help.

https://rentry.co/SwitchHackingIsEasy

Rentry is what people recommend here.

6adget · Feb 8, 2023

impeeza said:
If you want up-to-date guides, you can follow this one
https://rentry.org/EristaEmuNAND

or this one:
https://nh-server.github.io/switch-guide/

Hayato213 said:
https://rentry.co/SwitchHackingIsEasy

Rentry is what people recommend here.

Thank you. I'm going to dive into those guides and hopefully figure out where I screwed up.

Post automatically merged: Feb 8, 2023

Hayato213 said:
https://rentry.co/SwitchHackingIsEasy

Rentry is what people recommend here.

You sir fucking rock. I was able to get it working.

Hacking SWITCH NOOB PARADISE - Ask questions here

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Garfield’s Fitness Coach

New Member

Well-Known Member

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

GBAtemp's official atheist

Newcomer

GBAtemp's official atheist

Similar threads

Popular threads in this forum