PS5 EDM 010 No Since of Life , No Beep ?

jkyoho · Jan 31, 2023

Can you upload a picture and point where the value you measure?
Very confuse from you typing

kermit84 · Jan 31, 2023

This is exactly on the back where F7002 is, if you turn it around it is exactly the same place as F7002 when it is not switched on, the values there are 1.8V what is this place for?

But i can confirm, the PS5 is working, boot and nothing is defective, only the voltage there is 1.8V this is the other side backside from Motherboard.

jkyoho · Jan 31, 2023

kermit84 said:
This is exactly on the back where F7002 is, if you turn it around it is exactly the same place as F7002 when it is not switched on, the values there are 1.8V what is this place for?

Yes, that SBV chip output 1.8v from the top

kermit84 · Jan 31, 2023

This is correctly so or 1.8V comming from the F7002 ?

Everything is rightly so or ?

jkyoho · Jan 31, 2023

kermit84 said:
This is correctly so or 1.8V comming from the F7002 ?

Everything is rightly so or ?

No, EDM-010 board F7002 SHOULD HAVE on it both side. Unless you're EDM-020, I remember F7002 voltage on EDM-020 board has different value. I don't remember exactly but edm-020 is not generating 3.3v from F7002 AREA

kermit84 · Jan 31, 2023

I have EDM 10 circuit board, it's responsible for usb, isn't it?

??

I don't have 3.3v on both sides
only on the F7002 I have 3.3v and on the other side I have 1.8v

I have no connection to my controller ? : (

jkyoho · Jan 31, 2023

THIS is normal standby reading around F7002 SBV chip. I am not sure how you get 1.8v out of it

FYI, I dont have EDM-020 board by hand, But from my memory, its no longer generate 3.3v from F7002 area on EDM-020/Cfi-11xx ps5 v2 board

kermit84 · Jan 31, 2023

The F7002 Are i have there 3,3v but of the other side is a another SBV Chip there i have 1.8v but evety usb slots charge my controller and everythings working

On Picture which u have uploaded i have the same Values on F7002

its on FW 4.0.3

jkyoho · Jan 31, 2023

I not sure why you want to spend time on the back side SBV chip. IT has nothing to do with the front side or the usb port.
ON EDM-010 board, 5V Standby or USB port 5v generate from F7001 area. 3.3V gen from F7002 area, 1.8V comes LIKELY from the SBV on left side of CXD90061GG but I personally never seen one of SBV dies.

kermit84 · Jan 31, 2023

do you remember how I was looking for the shorts at the beginning?

I would have to desolder both SBVs

I have now properly soldered both SBVs backwards and was surprised when I saw 1.8V on the back, because it is also SBV : )

Nothing died, the short is fixed, I'm so grateful to you, I just wanted to be sure that everything was tidy, because I want to screw it up slowly: )

jkyoho · Jan 31, 2023

SBV chip is step down ic, They could do varies voltage step down from the 5V input. Thats why you have many SBV chip on same board but they do different voltage outputs. F7002 area SBV ouput 3.3v, but the backside does not.

Here is the SBV chip datasheet.
https://www.ti.com/lit/gpn/TLV62090

kermit84 · Jan 31, 2023

Yes, on front F7002 i have the values which u have too and backside not, because i was fight and fight and fight for waiting the same 3.3v on backside, so i can slowly screw the housing back when its evetything okay so ?

Have u 1.8v on the backside too ?

jkyoho · Jan 31, 2023

kermit84 said:
Have u 1.8v on the backside too ?

Yes, I have 1.8v on the backside SBV chip output from TOP

kermit84 · Jan 31, 2023

Ohhh Loordd Thhxx Uuu bigg

i screw slowly everything back , it was a birth of the hell for me it was my firstly fix my console with hot air my firstly first : )

jkyoho · Feb 1, 2023

I received EDM-020 board today, and just spend some time measuring around F7002 area.
Like I mentioned before, on EDM-020 f7002 indeed has 5V comes in but output 1.8v from that new "02C" chip (EDM-010 is SBV chip there)
But Funny Thing is, CPU side, NEW 02C CHIP output 3.3v. So I guess SIE Engineers tried to hide something.

If someone happened to figure out 02c chip part number, please PM me.
FYI. EDM-03x/CFI-12XX boards ALSO uses “02Z” chip instead of Texas Instrument "SBV" chip from 1st gen board EDM-010

accappatoio · Apr 6, 2023

Hi, guys (i'm not an expert) My ps5 EDM 010 no beep and not power on. i tried to unsolder the second cap, now it's power on but dosent' feed the disk. i need to replace that cap or it could be any other issue?

jkyoho · Apr 6, 2023

check your cables connection and F5401,F5402 fuses.

PS5 EDM 010 No Since of Life , No Beep ?

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Attachments

Well-Known Member

Similar threads

Popular threads in this forum