I brought mines on Amazon all three under 9 USD including shipping to colombia, you can get on other places for 3 or 4 usd but the sipping on your own.
The OG dev won't give me a copy either so... nope :<i was gonna say that but i didn't want to sound mean. our best bet would be linuxares
Need to bat the eyelids more XD all joking aside it seems it's up to us to get it working
The one that made the first (?) firmware for the rp2040 for the Switch. That never got released. It's canned.
- Joined
- Sep 13, 2022
- Messages
- 7,106
- Trophies
- 3
- Location
- The Wired
- Website
- m4x1mumrez87.neocities.org
- XP
- 21,781
- Country
It's encrypted so it isn't possible without decrypting.
It was put to me that two different people developed a firmware for the rp2040.
The beta version which zecoxao wrote about and the one which pre-dates the beta version by a different unknown dev.
Zeco? No he just posted a video he got sent. He haven't developed anything for the Switch as far as I know. He is in the Playstation scene right?
Depends where you buy it from, like Amazon that offer prime shipping you can get it like $9+ tax.
Another hwfly variant observed in its wild habitat!
Can anyone do me a massive favour and measure the thickness of a normal hwfly chip?
on the WaveShare the shipping to Colombia is 20 USD, so buying on amazon was a lot cheaper to me, I did buy 35 USD on different items and the shipping was free to Colombia.
Post automatically merged:
to get your Pico ID (the NOR Flash one) you have different methods:
Using Arduino Genuino
Or run this program on the Pico:
C:
#include "pico/unique_id.h"
String cadena;
String cadenaHex;
void setup() {
Serial.begin(115200);
while (!Serial) {
; // wait for serial port to connect. Needed for native USB port only
}
// send an intro:
Serial.println("\n\nPico Unique Board ID:");
Serial.println();
// initialize digital pin LED_BUILTIN as an output.
pinMode(LED_BUILTIN, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(LED_BUILTIN, HIGH);
cadena = "";
cadenaHex = "";
pico_unique_board_id_t board_id;
pico_get_unique_board_id(&board_id);
for (int i = 0; i < PICO_UNIQUE_BOARD_ID_SIZE_BYTES; ++i) {
cadena += String(" " + String(board_id.id[i], DEC));
cadenaHex += String(" " + String(board_id.id[i], HEX));
}
Serial.println("Flash ID (int): " + cadena);
Serial.println("Flash ID (hex): " + cadenaHex);
delay(250);
digitalWrite(LED_BUILTIN, LOW);
delay(250);
}then connect to computer and monitor the COM port of the connected pico, you will get something like:
This program DO NOT start running on the pico until you open a COM monitor
Last edited by impeeza,
Interestingly, binwalk only sees these encrypted binary sections in the uf2, when flashed and then dumped it no longer detects anything- just pure binary.
- Joined
- Dec 26, 2022
- Messages
- 95
- Trophies
- 0
- Location
- your router's unprotected root shell
- XP
- 170
- Country
you aren't going to have any luck decompiling the uf2 file. I tried to decrypt the binary file and while it worked, it seems they've done their homework and removed any useful information from that file. It would genuinely be easier to write your own.
From what I understand they're using the PIO on the rp2040 to perform the glitch instead of the fgpa on the hwfly boards
From what I understand they're using the PIO on the rp2040 to perform the glitch instead of the fgpa on the hwfly boards
Yeah…heh…that’s what I was uhhhh….going to try next. Had the code typed up and everything. Yeah…that’s the ticket.on the WaveShare the shipping to Colombia is 20 USD, so buying on amazon was a lot cheaper to me, I did buy 35 USD on different items and the shipping was free to Colombia.
Post automatically merged:
to get your Pico ID (the NOR Flash one) you have different methods:
Using Arduino Genuino
View attachment 349912
View attachment 349913
Or run this program on the Pico:
C:#include "pico/unique_id.h" String cadena; String cadenaHex; void setup() { Serial.begin(115200); while (!Serial) { ; // wait for serial port to connect. Needed for native USB port only } // send an intro: Serial.println("\n\nPico Unique Board ID:"); Serial.println(); // initialize digital pin LED_BUILTIN as an output. pinMode(LED_BUILTIN, OUTPUT); } // the loop function runs over and over again forever void loop() { digitalWrite(LED_BUILTIN, HIGH); cadena = ""; cadenaHex = ""; pico_unique_board_id_t board_id; pico_get_unique_board_id(&board_id); for (int i = 0; i < PICO_UNIQUE_BOARD_ID_SIZE_BYTES; ++i) { cadena += String(" " + String(board_id.id[i], DEC)); cadenaHex += String(" " + String(board_id.id[i], HEX)); } Serial.println("Flash ID (int): " + cadena); Serial.println("Flash ID (hex): " + cadenaHex); delay(250); digitalWrite(LED_BUILTIN, LOW); delay(250); }
then connect to computer and monitor the COM port of the connected pico, you will get something like:
View attachment 349914
This program DO NOT start running on the pico until you open a COM monitor
(Thanks buddy! It would have taken me quite a bit longer to get to that!)
Similar threads
-
ButterScott101
-
Xdqwerty
what are you looking at?
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
RedColoredStars:
There is an actual trailer with footage too. lol. Going to watch it tonight. Grabbed it from... a place. -
-
@
SylverReZ:
@Psionic Roshambo, JonTron's back yet again until he disappears into the void for another 6 or so months.+1 -
-
-
-
-
-
-
