My Switch's serial number starts with xaj9 ¿Is it patched for fusee gulee? (i cheked ismyswitchpatched and the prefix isnt there)
- Thread starter lucasfergui
- Start date
- Views 5,922
- Replies 61
- Status
Yo tambien hablo español
Post automatically merged:
Damaging what parts of the switch
K gonna try that later, but just 2 confirm, I have to make the electrical circuit on the pins on the edges of the rail, right?
If you are patient and careful you can use the paperclip method but i wouldnt suggest it as your posts show how patient you are. I have done it multiple times with the paperclip. Be careful, bend it smothly and make extra sure it is only touching the pins it is suppost to touch. Best advice is if your not comfortable and sure of yourself or cannot replace it and its your only unit then dont risk it. Buy a $5 jig of ebay.
- Joined
- Jul 23, 2018
- Messages
- 6,056
- Trophies
- 1
- Age
- 29
- Location
- Lampukistan
- Website
- hmpg.net
- XP
- 6,168
- Country
What list dude? The possibility that you can fry your console should be reason enough not to use the paperclip. Buy a jig on ebay.
your console can get damaged because a shortcut between voltages can fry some inside chips, no only the right rail.
Did the staple-adventure work @lucasfergui
Is your unit patched? Did you damage your rail or other components?
Is your unit patched? Did you damage your rail or other components?
Imma go take a shower, then I'll try it
Post automatically merged:
Gonna try it now
Best way to do it is mod the joy-con with a button, no need to remove the joy-cons anymore and is just maintaining the button pressed or a ON\OFF switch or whatever...
But that's only after confirming RCM works off course LOL
Genuinely wondering how anybody hasn't gone crazy
Dude doesn't want to spend a dime, doesn't want to wait, doesn't want to « stab himself », doesn't even want to buy paperclips, just waiting for a miracle solution basically
Anyway, people already told you what you had to know so I won't repeat, but you've already made up your mind. So good luck, but if anything goes wrong you'll have only yourself to blame
I just opened my right joycon and bent the pins
Even easier would be to open the switch, remove the emmc and push a payload then just put it back
Guessing due to OP not posting again apart from Wii U stuff, it wasn't a success lol
Bending a pin would be a hard feat 4 me lol...
I didn't touch the pins a single bit and wasn't super careful.
The problem was the trigger button spring went puff and I literally spent 1 hour searching 4 it, ended up using a random one I had and works fine though pressing from the sides it's a bit harder but in the middle has a very similar feeling
Finally we know, you've damaged you're interrest. I'm glad the Switch is okay.
- Status
Similar threads
-
-
@
realtimesave:
Nintendo needs to release a new console, switch is getting such shitty little games lately lol it's pathetic -
-
-
-
@
The Real Jdbye:
well actually
a new console won't do anything right now, because the games are still in development, that's why there are few games being released -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
