Hacking The ultimate list of mods to enter RCM

ILuvGames · May 31, 2020

RODIFIRE said:
hello I try to find if I can do it to my switch but I get little lost
(I remember I had lower firmaware and never use internet to my switch maybe from game he do update with out want it? I dont know)

anyway

I have a switch and current system verison is : 8.0.1
can I do something to it?
if someone can help me

thanks for your time

Although there are other guides, this should help you.

https://gbatemp.net/threads/switch-hacking-faq-updated.517252/

It's important to backup your nand when you are told to as it makes it easier to recover your switch if something goes wrong. If something does go wrong and you do not have a backup it's possible that your switch cannot be fixed without sending it back for repair. Which you will have to pay for as your warranty will be void as you made unofficial modifications to it.

DavidinCT · Jun 17, 2020

TheCyberQuake said:
Using a Reed switch is also an option to have a permanent mod that only temporarily shorts pin 10 when you need it.

Out of all the options, just taking a magnet to the back of the joycon could enable this ? OMG that is the best solution I have seen.

Just wondering, if you were playing with the system and pins 1 and 10 got connected (some type of magnet in a pocket), would this cause any harm ?

Jinx_Dojo · Jun 30, 2021

Please consider adding the metal from a twist tie as a possible alternative to the paper clip. I had lots of trouble with even a small paper clip, but the twist tie worked on the first try!

bane55 · Mar 18, 2022

Ata cable didn't work.

JeonDohyeon · Jul 21, 2022

My paper clip method just works for me. No long noses, just used 1 clip, 1 thick plastic case, and 1 hardened table.
(Please check out the comment 124 of the paperclip method url)

Booted into RCM but shame it was battery-enhanced model (= patched) with serial starting with XKK. The app crashed with code NULL.

testing123 · Dec 5, 2022

ILuvGames said:
Although there are other guides, this should help you.

https://gbatemp.net/threads/switch-hacking-faq-updated.517252/

It's important to backup your nand when you are told to as it makes it easier to recover your switch if something goes wrong. If something does go wrong and you do not have a backup it's possible that your switch cannot be fixed without sending it back for repair. Which you will have to pay for as your warranty will be void as you made unofficial modifications to it.

Thank you for your information. Would you happen to know the best way to backup the NAND in Fusee-Gelle?

SylverReZ · Dec 5, 2022

testing123 said:
Thank you for your information. Would you happen to know the best way to backup the NAND in Fusee-Gelle?

Use "hekake" to backup your NAND.

testing123 · Dec 5, 2022

M4x1mumReZ said:
Use "hekake" to backup your NAND.

Why did my previous post get deleted?

Don't know about your post, sorry.

So I have atmosphere currently running. I don't see how to actually access "hekake" from here. Do I need to reinject things from my computer?

SylverReZ · Dec 5, 2022

testing123 said:
Don't know about your post, sorry.

So I have atmosphere currently running. I don't see how to actually access "hekake" from here. Do I need to reinject things from my computer?

You can use "TegraInjectorGUI" to inject the payload or use an RCM Loader.

testing123 · Dec 5, 2022

M4x1mumReZ said:
You can use "TegraInjectorGUI" to inject the payload or use an RCM Loader.

Right, so I HAVE to reinject and cannot do it from the current atmosphere menu?

SylverReZ · Dec 5, 2022

testing123 said:
Right, so I HAVE to reinject and cannot do it from the current atmosphere menu?

You can do it from Atmosphere also.

Post automatically merged: Dec 5, 2022

bane55 said:
Ata cable didn't work.

Buy a moulded jig like everybody else, they also use the right type of wire thickness to shorten the pins. The paperclip, screwdriver, SATA cable, amongst many other methods are very risky, and if done wrong can damage your JoyCon port.

testing123 · Dec 5, 2022

M4x1mumReZ said:
You can do it from Atmosphere also.

Post automatically merged: Dec 5, 2022

Buy a moulded jig like everybody else, they also use the right type of wire thickness to shorten the pins. The paperclip, screwdriver, SATA cable, amongst many other methods are very risky, and if done wrong can damage your JoyCon port.

How do I do it in atmosphere?

SylverReZ · Dec 5, 2022

testing123 said:
How do I do it in atmosphere?

Whoops, I mean hekake. My apologies, was thinking of another thing entirely. Copy the payloads to the "bootloader/payloads" directory on the root of your SD card, launch "hekake" and select 'Payloads' from the menu.

testing123 · Dec 6, 2022

M4x1mumReZ said:
Whoops, I mean hekake. My apologies, was thinking of another thing entirely. Copy the payloads to the "bootloader/payloads" directory on the root of your SD card, launch "hekake" and select 'Payloads' from the menu.

Thanks for your info.

Do you know how I can install a 6GB NSP file? I cannot transfer it to an FAT32 SD card.

I also can't install tinfoil.

SylverReZ · Dec 6, 2022

testing123 said:
Thanks for your info.

Do you know how I can install a 6GB NSP file? I cannot transfer it to an FAT32 SD card.

I also can't install tinfoil.

You can use "DBI Installer" to install NSPs from over the network.

Setnour6 · Dec 14, 2023

If I were to do this for a Nintendo Switch Lite, how can it be done?

Also sorry for the necro-post

Hayato213 · Dec 14, 2023

Setnour6 said:
If I were to do this for a Nintendo Switch Lite, how can it be done?

Switch lite doesn't use RCM jig.

Setnour6 · Dec 14, 2023

Hayato213 said:
Switch lite doesn't use RCM jig.

Yes, but how can it be done outside of an RCM jig? I'm new to the whole switch CFW thing

HawaiianInTown · Dec 14, 2023

Setnour6 said:
If I were to do this for a Nintendo Switch Lite, how can it be done?

After the V1 got a revision, RCM jig was no longer an option. We now have hardware mods to exploit all handhelds after the v1
EDT: RCM was an exploit utilized to leverage tegra chipset. Chip was changed and so was the attack vector for exploit.

Hayato213 · Dec 14, 2023

Setnour6 said:
Yes, but how can it be done outside of an RCM jig? I'm new to the whole switch CFW thing

You need a modchip if you want to have CFW on the switch lite.

Hacking The ultimate list of mods to enter RCM

The Avatar-less One

Well-Known Member

Active Member

Active Member

New Member

Well-Known Member

Dat one with the Rez

Well-Known Member

Dat one with the Rez

Well-Known Member

Dat one with the Rez

Well-Known Member

Dat one with the Rez

Well-Known Member

Dat one with the Rez

Member

Newcomer

Member

Friendly Neighborhood Hawaiian

Newcomer

Similar threads

Popular threads in this forum