Hacking SWITCH NOOB PARADISE - Ask questions here

HelloShitty · Dec 3, 2022

binkinator said:
USBfs would require a USB cable.

If you want to see a Windows file share you would use SMB (and you won’t need nut to see the files in your file share) but I have to warn you it’s going to be hella slow!

The nut command you’re running would serve up the files in the local directory to Tinfoil using the actual nut option in Tinfoil.

So bottom line: you’ve picked 3 things that don’t work directly together so let’s see if we can narrow down your choices a bit.

Do you want:

Fastest possible install from your PC (USB)

Convenient, low setup server side, access over wireless from anywhere but slow (SMB)

Native Tinfoil access, similar to your own shop, that requires a server running on your PC (Nut)

Ok, I may have used wrong wording. I didn't want to suggest SMB at all. I said a "shared folder" because using the USB cable and setting the "Local Folders" in nut gui would allow me to browse that folder from within Tinfoil usbfs. At least that's what I was doing with my old card.

But what I want is in fact to use option 1 you mentioned! And I can't find many examples or instructions on how to setup things!

binkinator · Dec 3, 2022

HelloShitty said:
Ok, I may have used wrong wording. I didn't want to suggest SMB at all. I said a "shared folder" because using the USB cable and setting the "Local Folders" in nut gui would allow me to browse that folder from within Tinfoil usbfs. At least that's what I was doing with my old card.

But what I want is in fact to use option 1 you mentioned! And I can't find many examples or instructions on how to setup things!

Appreciate the clarity. You should be able to do this:

https://www.cfwaifu.com/tinfoil-nut/

Lamcza · Dec 3, 2022

Hello,
I setup my sd files form that guide link sdsetup.com

and i wonder what is noexe sys module and do i need it

?
Also when i try to use sys monitor module in dock botw it kinda works but dont show on the screen any solution?

@binkinator is that dpad mod playable when you need to use that con in split screen as one pad

?

binkinator · Dec 3, 2022

Riben said:
Hello,
I setup my sd files form that guide link sdsetup.com and i wonder what is noexe sys module and do i need it ?

Noexes is a debugging tool used by Switch Developers. 99.9% chance you don’t need it.

https://github.com/mdbell/Noexes
“A graphical remote debugger for the Nintendo Switch”

Riben said:
Also when i try to use sys monitor module in dock botw it kinda works but dont show on the screen any solution?

This guy, right?
https://gbatemp.net/threads/status-monitor-overlay-tesla-overlay-to-monitor-your-hardware.558505/

What steps are you taking and what works/doesn’t work along the way?

Riben said:
@binkinator is that dpad mod playable when you need to use that con in split screen as one pad ?

So far no issues. Everything plays like normal.

Post automatically merged: Dec 3, 2022

Kong21176 said:
any ideas for homebrew games not booting anymore after updating to 15.0.0?

What games are we talking about? Trying to ascertain whether these are ports or straight up homebrew.

Lamcza · Dec 3, 2022

binkinator said:
Noexes is a debugging tool used by Switch Developers. 99.9% chance you don’t need it.

https://github.com/mdbell/Noexes
“A graphical remote debugger for the Nintendo Switch”

This guy, right?
https://gbatemp.net/threads/status-monitor-overlay-tesla-overlay-to-monitor-your-hardware.558505/

What steps are you taking and what works/doesn’t work along the way?

So far no issues. Everything plays like normal.

Post automatically merged: Dec 3, 2022

What games are we talking about? Trying to ascertain whether these are ports or straight up homebrew.

yep, in dock mode i can click the buttons and enter to tesla and i can hear that iam in it, i can go back to leave it but there nothing displaying on the screen of my tv besides the game itself

i was trying to open tesla before docking but nope.
It is working fine in the switch menu/settings in dock.

binkinator · Dec 3, 2022

Riben said:
yep, in dock mode i can click the buttons and enter to tesla and i can hear that iam in it, i can go back to leave it but there nothing displaying on the screen of my tv besides the game itself i was trying to open tesla before docking but nope.
It is working fine in the switch menu/settings in dock.

Does Tesla Menu itself work outside of the dock in handheld mode?
Does Tesla Menu itself work in docked mode?

Does Status Monitor Overlay work in handheld mode?
I think we’ve established that Status Monitor Over does not work in docked mode.

HelloShitty · Dec 3, 2022

binkinator said:
Appreciate the clarity. You should be able to do this:

https://www.cfwaifu.com/tinfoil-nut/

Gonna give it a read, although I'm not in Windows! I'll compare the steps there to what I did so far!
Thanks

Yea, in windows, simply starting nut is enough. But I am giving it some parameters in Linux, and still can't see anything in usbfs:// on my console! The only thing different I did was to wnable the "Install Unsigned Code" but nothing changed!

When I start nut I see this:

Code:

loading blacklist /media/Storage/Nintendo/nut/nut/conf/blacklist.online.txt
loaded user HelloShitty
                        ,;:;;,
                       ;;;;;
               .=\',    ;:;;:,
              /_\', "=. \';:;:;
              @=:__,  \,;:;:\'
                _(\.=  ;:;;\'
               `"_(  _/="`
                `"\'
downloading titledb files
could not get title id from filename, name needs to contain [titleId] : titledb/db.nza                                    
unknown extension titledb/db.nza
loaded titledb/CO.en.json in 0.14693269599229097 seconds
loaded titledb/titles.json in 0.6627026700007264 seconds
loaded titledb/CO.es.json in 0.22491259599337354 seconds
loaded titledb/AR.en.json in 0.11738088200218044 seconds
loaded titledb/AR.es.json in 0.13167649699607864 seconds
loaded titledb/CL.en.json in 0.19990604199119844 seconds
loaded titledb/CL.es.json in 0.12677180898026563 seconds
loaded titledb/PE.en.json in 0.12061388898291625 seconds
loaded titledb/PE.es.json in 0.12686815799679607 seconds
loaded titledb/KR.ko.json in 0.32432636799057946 seconds
loaded titledb/HK.zh.json in 0.16425079901819117 seconds
loaded titledb/CN.zh.json in 0.0013420750037766993 seconds
loaded titledb/NZ.en.json in 0.46572551599820144 seconds
loaded titledb/AT.de.json in 0.1514152649906464 seconds
loaded titledb/BE.fr.json in 0.3382206499809399 seconds
loaded titledb/BE.nl.json in 0.5382873679918703 seconds
loaded titledb/CZ.en.json in 0.31925083399983123 seconds
loaded titledb/DK.en.json in 0.5956353599904105 seconds
loaded titledb/ES.es.json in 0.33303806598996744 seconds
loaded titledb/FI.en.json in 0.3195400230179075 seconds
loaded titledb/GR.en.json in 0.5430768689839169 seconds
loaded titledb/HU.en.json in 0.30453495000256225 seconds
loaded titledb/NL.nl.json in 0.31335249700350687 seconds
loaded titledb/NO.en.json in 0.19495817401912063 seconds
loaded titledb/PL.en.json in 0.7297178299922962 seconds
loaded titledb/PT.pt.json in 0.20730802699108608 seconds
loaded titledb/RU.ru.json in 0.43804106599418446 seconds
loaded titledb/ZA.en.json in 0.30782048602122813 seconds
loaded titledb/SE.en.json in 0.18940911401296034 seconds
loaded titledb/MX.en.json in 0.30424107299768366 seconds
loaded titledb/MX.es.json in 0.8644173080101609 seconds
loaded titledb/IT.it.json in 0.19445127100334503 seconds
loaded titledb/CA.en.json in 0.3005966829950921 seconds
loaded titledb/CA.fr.json in 0.3567092019948177 seconds
loaded titledb/FR.fr.json in 0.3497439050115645 seconds
loaded titledb/DE.de.json in 0.33160956102074124 seconds
loaded titledb/JP.ja.json in 1.0475320589903276 seconds
loaded titledb/AU.en.json in 0.3160772800038103 seconds
loaded titledb/GB.en.json in 0.31656227199709974 seconds
loaded titledb/US.es.json in 0.34555646500666626 seconds
loaded titledb/US.en.json in 0.32860938098747283 seconds
Could not locate UK/uk !
loaded titledb/titles.json in 0.5657426950056106 seconds
loaded file list in 0.00027608501841314137 seconds
initThread start
Sat Dec  3 16:40:14 2022 Server Starts - 192.168.1.112:9000
scanning /media/Storage/Nintendo/Free_Games/
scanning n-nswsports.xci                                                                                                  
could not get title id from filename, name needs to contain [titleId] : /media/Storage/Nintendo/Free_Games/Nintendo_Switch_Sports_NSW-NiiNTENDO/n-nswsports.xci
An error occurred processing file: NSP no titleId set                                                                     
scanning sxs-nintendo_switch_sports_v65536.nsp                                                                            
could not get title id from filename, name needs to contain [titleId] : /media/Storage/Nintendo/Free_Games/Nintendo_Switch_Sports_Update_v1.1.0_NSW-SUXXORS/sxs-nintendo_switch_sports_v65536.nsp
An error occurred processing file: NSP no titleId set                                                                     
scanning v-bayonetta_3.xci                                                                                                
could not get title id from filename, name needs to contain [titleId] : /media/Storage/Nintendo/Free_Games/v-bayonetta_3.xci
An error occurred processing file: NSP no titleId set                                                                     
initThread finish

There are some errors in this log but I don't know if there are good to ignore or not.
And then in the gui, I see this:

It says disconnected from USB, but the console is connected.
Also, in the folder where I have a coupe of games (.nsp an .xci files), it can only see the one above.

binkinator · Dec 3, 2022

HelloShitty said:
Gonna give it a read, although I'm not in Windows! I'll compare the steps there to what I did so far!
Thanks

Yea, in windows, simply starting nut is enough. But I am giving it some parameters in Linux, and still can't see anything in usbfs:// on my console! The only thing different I did was to wnable the "Install Unsigned Code" but nothing changed!

The server side isn[t that complicated so you should be OK. Just make sure you have some nsp or xci files in the directory where you start nut.

The one other thing you might try is to switch to just :usb instead of :usbfs in tinfoil.

E: also helps to set up config file instead of typing it in each time on the command line.

Copy this default file…

https://github.com/blawar/nut/blob/master/conf/nut.default.conf

…into ./conf/nut.conf

Then make any changes there.

HelloShitty · Dec 3, 2022

binkinator said:
The server side isn[t that complicated so you should be OK. Just make sure you have some nsp or xci files in the directory where you start nut.

The one other thing you might try is to switch to just :usb instead of :usbfs in tinfoil.

E: also helps to set up config file instead of typing it in each time on the command line:

https://github.com/blawar/nut/blob/master/conf/nut.default.conf

I have been editing my previous post.
Yes, I also tried usb://. Can't see nothing either.
About the config file, do you then need to give the config file path as a parameter or nut wil read it automatically if it is present?

binkinator · Dec 3, 2022

HelloShitty said:
I have been editing my previous post.
Yes, I also tried usb://. Can't see nothing either.
About the config file, do you then need to give the config file path as a parameter or nut wil read it automatically if it is present?

Ahhhh. I see now. Good deal.

It just needs to be present. It will look for ./conf/nut.conf
https://github.com/blawar/nut/blob/2cf351400418399a70164987e28670309f6c9cb5/nut/Config.py#L877

There are some more USB configs for Linux hidden here:

https://github.com/blawar/nut#installation-guide-linux

E: if I recall correctly, your files need to be named correctly to the right pattern. Try renaming them to match the pattern of the working one.

HelloShitty · Dec 3, 2022

I managed somehow to see the console with the status "Connected" now. I changed the USB port I was using.
In my case, usbfs:// freezes Tinfoil and can't access the folder with the games in my latop.
Not sure if it is related to this:
https://github.com/blawar/nut/issues/387

However, why it only sees one of 3 or 4 games in the folder?
These are the contents of the folder

binkinator · Dec 3, 2022

HelloShitty said:
I managed somehow to see the console with the status "Connected" now. I changed the USB port I was using.
In my case, usbfs:// freezes Tinfoil and can't access the folder with the games in my latop.
Not sure if it is related to this:
https://github.com/blawar/nut/issues/387

However, why it only sees one of 3 or 4 games in the folder?
These are the contents of the folder
View attachment 341269

Did you unrar the nsp/xci files underneath what looks like might be torrent directories to the untrained eye?

Might want to try :usb protocol now and see if that works.

HelloShitty · Dec 3, 2022

binkinator said:
Did you unrar the nsp/xci files underneath what looks like might be torrent directories to the untrained eye?

yes I have.
I'll try to change the names of the files to see if anything changes. Namelly Bayonetta which is in xci format!

Where do I find the game key? I mean that long string of chars in the middle of the name of the file in MotoGP22 case?
I need to put it for Bayonetta.

binkinator · Dec 3, 2022

HelloShitty said:
yes I have.
I'll try to change the names of the files to see if anything changes. Namelly Bayonetta which is in xci format!

I seem to recall an Organize option. I thought it would rename files…might be mixing it up with nspindexer.

Lamcza · Dec 3, 2022

binkinator said:
Does Tesla Menu itself work outside of the dock in handheld mode?
Does Tesla Menu itself work in docked mode?

Does Status Monitor Overlay work in handheld mode?
I think we’ve established that Status Monitor Over does not work in docked mode.

yep fully
only in menu/settings (in game you can start it and navigate in it but you cant see anything no overlay

)
yep fully

It is working only in menu/settings

I will try to update it tomorrow maybe there was some old version in sdsetup files

HelloShitty · Dec 3, 2022

binkinator said:
I seem to recall an Organize option. I thought it would rename files…might be mixing it up with nspindexer.

I have no idea what that option does. Anyway, changing the names of the files actually make them to show up in the application.
So, I think things are going better now.

And is it normal that XCI files are considered DLCs? In this case my Bayonetta 3 file is XCI and shows up as DLC in nut_gui!

binkinator · Dec 3, 2022

HelloShitty said:
I have no idea what that option does. Anyway, changing the names of the files actually make them to show up in the application.
So, I think things are going better now.

And is it normal that XCI files are considered DLCs? In this case my Bayonetta 3 file is XCI and shows up as DLC in nut_gui!

What did you name it? Did you use the correct titleID and (v)ersion? It should be 0 for a base game. Try checking your file with one of the backup checkers.

Post automatically merged: Dec 3, 2022

Riben said:
Does Tesla Menu itself work outside of the dock in handheld mode? yep fully

Does Tesla Menu itself work in docked mode? only in menu/settings (in game you can start it and navigate in it but you cant see anything no overlay )

Does Status Monitor Overlay work in handheld mode? yep fully

I think we’ve established that Status Monitor Over does not work in docked mode. It is working only in menu/settings

Let me align your answers to my questions to make sure we’re on the same page…

When you say, “menu/settings” what does that mean? Perhaps a screenshot might clear my confusion…

HelloShitty · Dec 3, 2022

binkinator said:
What did you name it? Did you use the correct titleID and (v)ersion? It should be 0 for a base game. Try checking your file with one of the backup checkers.

Post automatically merged: Dec 3, 2022

Let me align your answers to my questions to make sure we’re on the same page…

When you say, “menu/settings” what does that mean? Perhaps a screenshot might clear my confusion…

I did something like Bayonetta_3_[random_shit_here][v0].xci.
And I wanted to know the correct "random_shit" but I don't know where to get it!

Edited;
And I ran into problems because I first tried [v1] and it automatically created a new folder inside nut. Then, I deleted the xci file from that folder by hand and nut was not starting anymore. So, I had to create the folder again and it's starting now.
The xci file is now in another folder inside nut because as you said, v0 is base and apparently v1 is DLC. Didn't try anything different from v0 and v1, so I don't know if there are other meanings for it.

But yes, it seems to exist a bug with usbfs:// as I pointed above in the github link. And it's not fixed.

binkinator · Dec 3, 2022

HelloShitty said:
I did something like Bayonetta_3_[random_shit_here][v0].xci.
And I wanted to know the correct "random_shit" but I don't know where to get it!

Edited;
And I ran into problems because I first tried [v1] and it automatically created a new folder inside nut. Then, I deleted the xci file from that folder by hand and nut was not starting anymore. So, I had to create the folder again and it's starting now.
The xci file is now in another folder inside nut because as you said, v0 is base and apparently v1 is DLC. Didn't try anything different from v0 and v1, so I don't know if there are other meanings for it.

But yes, it seems to exist a bug with usbfs:// as I pointed above in the github link. And it's not fixed.

Check this out:

https://titledblookup.stackblitz.io/

Select language file to use, type in a word to search, and bingo, you get your tittleID. :-)

Can do it here, too:

http://nswdb.com/

HelloShitty · Dec 3, 2022

My bad luck couldn't stop here.
I don't understand the philosofy of this nut.
I just donwloaded an update for Bayonetta 3, changed it's name for "Bayonetta_3_Update[keyhere][v1.0.0].xci".
After that I think I click on Organize names and apparently nothing changed. However, when I check in console, I see the name like "Bayonetta_3_Update[keyhere][v1.0.0].xci[v0].xci".
Moreover, when I try to install this, it downloads to the console but then I get an error: Unknown NCA magic (decryption faile?).

Any tips? I found a thread from gbatemp saying it should be fine and install, but not in my case. When I try to start the game, I still get a message to install an update!

Hacking SWITCH NOOB PARADISE - Ask questions here

Well-Known Member

Garfield’s Fitness Coach

Typ tego typu.

Garfield’s Fitness Coach

Typ tego typu.

Garfield’s Fitness Coach

Well-Known Member

Attachments

Garfield’s Fitness Coach

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Garfield’s Fitness Coach

Typ tego typu.

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Garfield’s Fitness Coach

Well-Known Member

Similar threads

Popular threads in this forum