You’re right,Great stuff dude
The one thing I'd recommend is people make sure they are selecting erase flash when flashing the esp and not just over writing as this can cause problems also
, and another issue can be also the usb C cable used. Some people I think use usb C power charge only, not knowing you need data.
I was thinking this myself but would they not be able to flash the bin if a charger cable was being used?You’re right,
@Leeful
I have had the same problem with V1 and V2 ,,
I have PS4 Slim firmware 9.0 and I use the Browser to load the Xploit
When I come out of Rest Mode, the PS4 freezes and I have to turn it off and reload the whole Hack.
With GoldHen v2.2.4 It didn't happen to me.
Thanks for all the work
I have had the same problem with V1 and V2 ,,
I have PS4 Slim firmware 9.0 and I use the Browser to load the Xploit
When I come out of Rest Mode, the PS4 freezes and I have to turn it off and reload the whole Hack.
With GoldHen v2.2.4 It didn't happen to me.
Thanks for all the work
You can set it to use GoldHEN 2.2.4.
Just Press R1when you have goldhen selected and change the version to 2.2.4.
It will then use v2.2.4 every time instead of the latest one.
That’s why I ( among other master piece of code and work) love your menu, being able to choose GH , I’ve tested latest, and if, in fact, doesn’t KP my PS4 pro on 9.00 , doesn’t work well, so I stick to 2.2.2 working without issues for me.
Hi @Leeful
I did these 3 tests following your instructions exactly and all 3 works as expected....
However, I have a minor issue with the url address, below details:
On the setup and caching the page, the url:
prb123.ir/ps-phive/esptest
works without issue as expected.
But after connect on the PS-Phive! access point and put the same url (following your instructions) I have got the below errors, screen-shots:
Then, I have click on OK button and I have got the final error:
Only it works well when I have indicated the full url address (like I did in the menu v2):
prb123.ir/ps-phive/esptest/index.htlm
As I said, from here the page was loaded correctly and I have ran by order these 3 tests all them working well with the same result that you wrote in the page...
That's all.
I did these 3 tests following your instructions exactly and all 3 works as expected....
However, I have a minor issue with the url address, below details:
On the setup and caching the page, the url:
prb123.ir/ps-phive/esptest
works without issue as expected.
But after connect on the PS-Phive! access point and put the same url (following your instructions) I have got the below errors, screen-shots:
Then, I have click on OK button and I have got the final error:
Only it works well when I have indicated the full url address (like I did in the menu v2):
prb123.ir/ps-phive/esptest/index.htlm
As I said, from here the page was loaded correctly and I have ran by order these 3 tests all them working well with the same result that you wrote in the page...
That's all.
@Leeful
I think the problem may be in GoldHen 2.2.5b7 itself, because with the previous ones it doesn't crash when coming out of Rest Mode.
I hope they find the bug in GoldHen 2.2.5b7 and fix it, because now almost all Trainers are .MC4 and only work with GoldHen 2.2.5b7 .
Thanks for your job
I think the problem may be in GoldHen 2.2.5b7 itself, because with the previous ones it doesn't crash when coming out of Rest Mode.
I hope they find the bug in GoldHen 2.2.5b7 and fix it, because now almost all Trainers are .MC4 and only work with GoldHen 2.2.5b7 .
Thanks for your job
The GH team know it already... They are working how to fix it...
BTW, the MC4 trainers can work from a PC or from my own android apk, no only using GH, so is not a big issue...
Last edited by xZenithy,
If its the same one as @eemcmCL posted a picture of then yes. This is the same one I use.Look for it as lolin s2 mini
Hi @Leeful ,
For your info, I have tested this one too:
Leeful v5 HOST For PS4 9.00Fw on ESP32-S2
https://t.co/55wPncXZL0
And it works perfect too without the typical message ""unsupported file system message"...
Incredible... but we cannot choose the GH version...
How is cooking the v3? can we wait for a Christmas gift surprise?
For your info, I have tested this one too:
Leeful v5 HOST For PS4 9.00Fw on ESP32-S2
https://t.co/55wPncXZL0
And it works perfect too without the typical message ""unsupported file system message"...
Incredible... but we cannot choose the GH version...
How is cooking the v3? can we wait for a Christmas gift surprise?
@kameleon_ is to thank for putting my v5 on that ESP32-S2. Glad to hear its working well, Saves me a lot of time.Hi @Leeful ,
For your info, I have tested this one too:
Leeful v5 HOST For PS4 9.00Fw on ESP32-S2
https://t.co/55wPncXZL0
And it works perfect too without the typical message ""unsupported file system message"...
Incredible... but we cannot choose the GH version...
How is cooking the v3? can we wait for a Christmas gift surprise?
My PS-Phive! v3 is comming along nicely. I've got all the functionality working how I want. I am now tweaking things to make it work the best it can.
As I've mentioned before, its a fine balancing game. I'll get there in the end.
That's awesome@kameleon_ is to thank for putting my v5 on that ESP32-S2. Glad to hear its working well, Saves me a lot of time.
My PS-Phive! v3 is comming along nicely. I've got all the functionality working how I want. I am now tweaking things to make it work the best it can.
As I've mentioned before, its a fine balancing game. I'll get there in the end.
Similar threads
-
The Real Jdbye
*is birb*
-
-
-
-
@
Psionic Roshambo:
Ken I have that sort of set up on Drastic on Pi for games that don't require touch -
-
-
@ HiradeGirl:
Any TV with your PC connected with Citra and any smartphone to use as a screen using a free play store app.+1 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
