I managed to get most of the screws out out, but I'm starting to strip the ones underneath the joy cons. I wait until the person who installed the mod chip replies to me.
Side note about the screws: They are actually JIS screws, rather than Phillips. They look similar but Phillips screws are designed to cam out under force to protect the piece (and destroy the screw instead) vs a JIS which bites into the full face of the screw and will destroy the material you’re working on rather than strip the screw.
Side note about the screws: They are actually JIS screws, rather than Phillips. They look similar but Phillips screws are designed to cam out under force to protect the piece (and destroy the screw instead) vs a JIS which bites into the full face of the screw and will destroy the material you’re working on rather than strip the screw.
Hey relatively nooby user here, I updated my firmware and atmosphere version after not using the switch in a while, and i can't connect to the internet anymore. I have the dns set so it blocks the nintendo servers and all that and wifi works when i boot the switch normally (not in cfw) but in cfw I cannot access tinfoil stores and when i test the wifi it comes up with an immediate error that the internet connection has failed. Any helpful advice would be appreciated.
Hey relatively nooby user here, I updated my firmware and atmosphere version after not using the switch in a while, and i can't connect to the internet anymore. I have the dns set so it blocks the nintendo servers and all that and wifi works when i boot the switch normally (not in cfw) but in cfw I cannot access tinfoil stores and when i test the wifi it comes up with an immediate error that the internet connection has failed. Any helpful advice would be appreciated.
Do you have any files in /atmosphere/hosts/. If so, please share their contents.
Also check, but don’t fix yet, that you’re not in Airplane mode and that your Wifi is configured in Emunand and DNS is set up in Emunand.
E: internet connection failed is normal if you have Ninty servers blocked…mine does that but I can still use Tinfoil. It’s a bad test that just checks if you can contact Ninty.
Do you have any files in /atmosphere/hosts/. If so, please share their contents.
Also check, but don’t fix yet, that you’re not in Airplane mode and that your Wifi is configured in Emunand and DNS is set up in Emunand.
E: internet connection failed is normal if you have Ninty servers blocked…mine does that but I can still use Tinfoil. It’s a bad test that just checks if you can contact Ninty.
I recently I had an isssue with my games, it say something about data being corrupted I updated everything and it was working no issues. On the unmodded side of the switch I have smash bros on the modded side I didn’t have it suddenly smash appeared on my modded side and all my games disappeared I can see my sd card has used space so I’m sure the games are there just not sure why they don’t show the switch
The new AtmoXL-Titel-Installer is released and correct the problem installing NSZ compressed with zstd 1.5.0 and newer, by now only DBI and AtmoXL-Titel-Installer works fine.
The new AtmoXL-Titel-Installer is released and correct the problem installing NSZ compressed with zstd 1.5.0 and newer, by now only DBI and AtmoXL-Titel-Installer works fine.
You picture shows you have an (S) at the end of your FW version. This means you are booting CFW on (S)ysnand and not emunand. In short this means everything you are doing regardless of how you are booting is happening on yiur real eMMC. I would not be surprised if some interesting things are happening due to this confusion.
The black background with the spinning “waiting” logo is typically from a corrupt source. Try deleting from System Settings -> Data Management and installing again or find a new source for that particular game.
E: also would like to know how you installed Tinfoil. Did you use the self installer? If so did you install it via title override?
You picture shows you have an (S) at the end of your FW version. This means you are booting CFW on (S)ysnand and not emunand. In short this means everything you are doing regardless of how you are booting is happening on yiur real eMMC. I would not be surprised if some interesting things are happening due to this confusion.
impeeza was responding to Hayato213 about an issue regarding NSZ files. AtmoXL is unrelated to your issue.
Post automatically merged:
I’m sorry, but I don’t understand the question. Could you perhaps ask this question in a different way?
Post automatically merged:
The black background with the spinning “waiting” logo is typically from a corrupt source. Try deleting from System Settings -> Data Management and installing again or find a new source for that particular game.
E: also would like to know how you installed Tinfoil. Did you use the self installer? If so did you install it via title override?
I got nothin for you, brotha. That’s a question for suchmememanyskill He seems a little bummed with the Switch scene as of his latest comments in the thread.
I got an answer from Github member @dezem. Apparently he has a version that works on OLEDS (or at least worked for me).
The version can be downloaded here, just for reference.
considering this should have been one of the first steps you should have done after backing up your nand i hope it's not too late. how much did you do with atmosphere on your sysnand?
It's the first Nintendo Switch firmware update of 2024. Made available as of today is system software version 18.0.0, marking a new milestone. According to the patch...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
Yet another casualty goes down in the never-ending battle of copyright enforcement, and this time, it hit a big website which was the host for many fangames based and...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
The romhacking community is always a source for new ways to play retro games, from completely new levels or stages, characters, quality of life improvements, to flat...
Retro handheld manufacturer Anbernic is releasing a refreshed model of its RG35XX handheld line. This new model, named RG35XX 2024 Edition, features the same...
It's the first Nintendo Switch firmware update of 2024. Made available as of today is system software version 18.0.0, marking a new milestone. According to the patch...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Yet another casualty goes down in the never-ending battle of copyright enforcement, and this time, it hit a big website which was the host for many fangames based and...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
