Hacking 7.55 User Guide & Exploit Host Menu V3 Binloader: now with added GoldHEN!

[Prb]

today I do check it.. v3innew.bin is not working.. v3in blue still loading long time

just flashing v3innew.bin i'll let you know

 

[sathakj]

just flashing v3innew.bin i'll let you know

ok alright.. no worries bro.. I will wait for when you done

 

[viper3344]

yes I know setup my wifi for the esp. btw i will show you.. i mean v3innew.bin

Just tested the ESP. Works perfectly fine! All I did was delete the cookies>re-enable internet>wait about a min> let it cache>disable internet>run exploit.

Prb - The "newest exploit" (The further most left one) and goldhen 1.1 worked on the FIRST try. Got 3 out of memory errors but thats the easy part

The ONE thing that I still get, and this has been since V2, is that the PS4 always crashed when shutting down. Rest mode in and out works perfectly every time, but its only when I shut down out of goldhen 1.1. I have to reboot, reverify the HDD then shut down again with no exploit loaded. Not a big deal but wondering if anyone else had this issue?

 

[linuxares]

V3in update cleaner look / more payloads (fakeusb) check it out

@linuxares what you think of new look ?

I'll check it later today

 

[Prb]

ok alright.. no worries bro.. I will wait for when you done

works fine ?

dont forget setup your wifi with custom not easy setting
manual dns primary dns 10.13.37.1 secondary dns 0.0.0.0
leave everything else as default
and test internet connection at the end of setup
ssid ps4exlpoit
obtian ip address succsessful
internet connection failed

then just use ps button to back out and go to user guide

 

[viper3344]

works fine ?

dont forget setup your wifi with custom not easy setting
manual dns primary dns 10.13.37.1 secondary dns 0.0.0.0
leave everything else as default
and test internet connection at the end of setup
ssid ps4exlpoit
obtian ip address succsessful
internet connection failed

then just use ps button to back out and go to user guide

Yup, see my previous post for what I did and it worked fine. Great work as usual Prb!! Does this one contain the absolute latest that was posted to github Prb? I ran the one on the left that said latest and it worked FIRST TRY!!

 

[Prb]

Yup, see my previous post for what I did and it worked fine. Great work as usual Prb!! Does this one contain the absolute latest that was posted to github Prb? I ran the one on the left that said latest and it worked FIRST TRY!!

yes

 

[sathakj]

works fine ?

dont forget setup your wifi with custom not easy setting
manual dns primary dns 10.13.37.1 secondary dns 0.0.0.0
leave everything else as default
and test internet connection at the end of setup
ssid ps4exlpoit
obtian ip address succsessful
internet connection failed

then just use ps button to back out and go to user guide

not working for my wifi ESP binv3 for ps4 .. i know setup it before work for binV2

 

[viper3344]

not working for my wifi ESP binv3 for ps4 .. i know setup it before work for binV2

Delete all your cookies. Reboot the ps4. Remove all wifi settings. Reboot the Ps4. Try again. (I never had to remove the wifi settings as prb kept the esp settings the same. I only ever had to reflash and reconnect to cache)

Try reflashing the bin as well. Maybe it was a bad flash. I always erase mine as well and not just overwrite.

 

[Prb]

not working for my wifi ESP binv3 for ps4 .. i know setup it before work for binV2

there is no reason why it should not work both bins are fine check you wifi setup make sure
follow
custom not easy setting
manual dns primary dns 10.13.37.1 secondary dns 0.0.0.0
leave everything else as default
and test internet connection at the end of setup
ssid ps4exlpoit
obtian ip address succsessful
internet connection failed

then just use ps button to back out and go to user guide
reflash and try again as @viper3344 said make sure you erase
and dont forget to clear your cache

 

[sathakj]

Delete all your cookies. Reboot the ps4. Remove all wifi settings. Reboot the Ps4. Try again. (I never had to remove the wifi settings as prb kept the esp settings the same. I only ever had to reflash and reconnect to cache)

Try reflashing the bin as well. Maybe it was a bad flash. I always erase mine as well and not just overwrite.

there is no reason why it should not work both bins are fine check you wifi setup make sure
follow
custom not easy setting
manual dns primary dns 10.13.37.1 secondary dns 0.0.0.0
leave everything else as default
and test internet connection at the end of setup
ssid ps4exlpoit
obtian ip address succsessful
internet connection failed

then just use ps button to back out and go to user guide
reflash and try again as @viper3344 said make sure you erase
and dont forget to clear your cache

HEYYYYY.... It works perfectly for me.. thank you for helping me

--------------------- MERGED ---------------------------

it sounds like you're not connected to the internet. is the internet enabled?

It works perfectly for me

 

[viper3344]

HEYYYYY.... It works perfectly for me.. thank you for helping me

--------------------- MERGED ---------------------------


It works perfectly for me

Did it work first time or did you get a KP?

 

[Alsusee]

I've tried the new esp and the PS4 is slower to connect to the ESP.

To help it along, I put the tick into the box to enable to connection then go to test the connection and wait until it gets an IP and I know its good to go.

I've not had much luck with any of the manual ESP files (v2 and v3) as I mostly get KPs when trying to run the any of the exploits.

 

[Morih1994]

last version webkit was way faster, but i got many KP's, this new v3in blue webkit is pretty much like old ones, what did u change in it?

 

[Prb]

last version webkit was way faster, but i got many KP's, this new v3in blue webkit is pretty much like old ones, what did u change in it?

It's actually the same webkit it has been since v3in was first released it's the very latest one in both V3IN & V3IN blue

Change log for v3in blue
Is only fakeusb payload and sleirsgoevy latest exploit

V3in had a couple more changes

It's common knowledge my friend that 7.xx webkit is unstable as a result you will get times when it loads first time and other times it may take a few attempts that's just the nature of an unstable exploit unfortunately

 

[linuxares]

I checked yesterday btw @Prb I honestly didn't see any difference. I guess I need to empty my cache.

EDIT: Anyway to access the payloads instantly again without needing to go via the index page that need to use the webkit exploit again?

 

[Prb]

I checked yesterday btw @Prb I honestly didn't see any difference. I guess I need to empty my cache.

Yeah just clear cache and re-cache
The latest V3IN has a new look some more payloads and the latest exploit from sleirsgoevy

--------------------- MERGED ---------------------------

I've tried the new esp and the PS4 is slower to connect to the ESP.

To help it along, I put the tick into the box to enable to connection then go to test the connection and wait until it gets an IP and I know its good to go.

I've not had much luck with any of the manual ESP files (v2 and v3) as I mostly get KPs when trying to run the any of the exploits.

I've keep saying it
For some reason that I can't explain 7.xx just
Isn't as fast or as reliable on the esp8266 you guys really need to try the selfhost browser version from personal testing it's just better
As I said I really don't know why as I like my esp8266 it's what I use to cache the exploit on my 6.72 ps4 but 7.xx selfhost browser all the way

 

[viper3344]

Yeah just clear cache and re-cache
The latest V3IN has a new look some more payloads and the latest exploit from sleirsgoevy

--------------------- MERGED ---------------------------


I've keep saying it
For some reason that I can't explain 7.xx just
Isn't as fast or as reliable on the esp8266 you guys really need to try the selfhost browser version from personal testing it's just better
As I said I really don't know why as I like my esp8266 it's what I use to cache the exploit on my 6.72 ps4 but 7.xx selfhost browser all the way

Whats unstable about the esp8266? I never had an issue with it caching first try and Ive been testing and using all your bin files since the first one. Folks having issues with it caching the site?

 

[Prb]

Whats unstable about the esp8266? I never had an issue with it caching first try and Ive been testing and using all your bin files since the first one. Folks having issues with it caching the site?

Nothing wrong with the esp8266 just a little limited when it comes to putting on larger files so much compression is not great for stability and successful loading of the exploit
For instance the 3 exploit that are in V3IN are 3.6mb each on average so over 10 mb just for the exploits the esp8266 has a maximum storage space of only 2.6mb so you can imagine how much the menu is compressed
Plus the user guide is naturally more prone to the out of memory error in my experience

 

[viper3344]

Nothing wrong with the esp8266 just a little limited when it comes to putting on larger files so much compression is not great for stability and successful loading of the exploit
For instance the 3 exploit that are in V3IN are 3.6mb each on average so over 10 mb just for the exploits the esp8266 has a maximum storage space of only 2.6mb so you can imagine how much the menu is compressed
Plus the user guide is naturally more prone to the out of memory error in my experience

Oh I see! So......... if you are feeling up for it, and I don't want to be a bother... what about an ESP lite version? Literally JUST the top row. Old method, new method, Goldhen 1.1. That's it If you don't have the time I totally understand, just seeing if maybe I can test a version where you dont have to compress so many things