Gaming My DSi XL won't power on after tear down. Blinking charger led

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece
Hi guys! I had yesterday cleaned my nintendo dsi xl and mostly i wanted to clean the right and the left shoulder buttons. I did that in the first place and then i turned on my dsi xl. Then it powered on completely good and i checked them. One didnt work and then i teard it down again to reclean it but after that i cant power it on. When i put it to charge it has the charger icon blinking and it is not a battery problem as i have tested the battery in other dsi xl’s and it works completely fine. Can you help me?

UPDATE: I have also tested the screens and reseated them completely everything seems fine but it doesnt boot. :(
 

Attachments

  • IMG_20200620_002002.jpg
    IMG_20200620_002002.jpg
    1.3 MB · Views: 448
  • IMG_20200620_001058.jpg
    IMG_20200620_001058.jpg
    999.6 KB · Views: 374

IC_

GBAtemp's ???
Member
Joined
Aug 24, 2017
Messages
1,569
Trophies
1
Location
The Forest
XP
5,424
Country
Antarctica
Try reconnecting the power cable from the power board (the one with the white connector and red and black wires), the blinking charging LED happens when there is no battery connected
If that doesn't work then look at that cable to make sure it isn't damaged anywhere and also try cleaning the contacts for the battery
 
  • Like
Reactions: Alexander1970

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece
I did it and its good connected. Also as i said i have tried cleaning the battery and tested to other dsi's and it fully works. The dsi stopped to power on after i cleaned it 2nd time.( i cleaned only the right and left shoulder buttons)

--------------------- MERGED ---------------------------

I had checked that and its good connected. Its the second time that i cleaned the ds and suddenly that happened. The first time nothing bad happened and it booted nicely. I dont know what else to do. As i said i had checked the battery with other dsi's and it worked nicely.
 

IC_

GBAtemp's ???
Member
Joined
Aug 24, 2017
Messages
1,569
Trophies
1
Location
The Forest
XP
5,424
Country
Antarctica
Oh okay, if you have a multimeter/continuity checker then check if there's continuity between the battery contacts and the power connector on the motherboard but if you don't then I don't know what you can do
 
  • Like
Reactions: Alexander1970

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece
i Dont sadly :(. I will try borrow one and try out but what should i test? i mean i will touch the battery to test it with the power board but where?
 

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece
i cant because its a dsi and a dsi xl. I think the board must be from dsi xl to dsi xl. Im not sure about that tho correct me if im wrong
 

IC_

GBAtemp's ???
Member
Joined
Aug 24, 2017
Messages
1,569
Trophies
1
Location
The Forest
XP
5,424
Country
Antarctica
i cant because its a dsi and a dsi xl. I think the board must be from dsi xl to dsi xl. Im not sure about that tho correct me if im wrong
Yeah replace the power board with another DSi XL power board
Maybe wait some time before getting a new DSi from someone else or a new power board, maybe someone else here will have better advice
 
  • Like
Reactions: Alexander1970

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece

So do i have to buy another fuse and solder it or resolder that one? because in this video is the old dsi. Also did it work fully for you?

--------------------- MERGED ---------------------------

Yeah replace the power board with another DSi XL power board
Maybe wait some time before getting a new DSi from someone else or a new power board, maybe someone else here will have better advice
Do you know where i can get cheap power board?
 

JuanMena

90's Kid, Old Skull Gamer & Artist
Member
Joined
Dec 17, 2019
Messages
4,890
Trophies
2
Age
30
Location
the 90's 💙
XP
10,075
Country
Mexico
So do i have to buy another fuse and solder it or resolder that one? because in this video is the old dsi. Also did it work fully for you?

I don't know if this is the actual "fix" to this problem, but I believe it's the probable cause.
I can't tell you if this works because I never bothered looking for such a small piece.
I turned that DS Lite into a Gameboy Advance... in other words, I just took of the top screen and now that DS boots into GBA Mode.
 

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece
I don't know if this is the actual "fix" to this problem, but I believe it's the probable cause.
I can't tell you if this works because I never bothered looking for such a small piece.
I turned that DS Lite into a Gameboy Advance... in other words, I just took of the top screen and now that DS boots into GBA Mode.
So did you just add the wire and sold it down like the video i saw?
 

JuanMena

90's Kid, Old Skull Gamer & Artist
Member
Joined
Dec 17, 2019
Messages
4,890
Trophies
2
Age
30
Location
the 90's 💙
XP
10,075
Country
Mexico
So did you just add the wire and sold it down like the video i saw?
I do remember doing the wire thing with no actual positive result.
Maybe you can try it and see if that works for you. To be honest, my soldering skills weren't that good back then, and my soldering gun has a very broad tip, which is hard to control with such small pieces.
 
  • Like
Reactions: Alexander1970

KGBEER

Well-Known Member
Newcomer
Joined
Aug 15, 2008
Messages
46
Trophies
1
XP
627
Country
United States
@JackGR
Well it seems your don't have much of experience with circuit boards so I would recommend you to be safe and don't try anything your are not familiar.
Second the video is not for old dsi, is for the very old DS PHAT. After that there's DS LITE. And after the regular DSi and yours it's DSi XL.
Which means 3 models later which may have many variation on circuit board.

You should try before doing anything it's check for any loose or broken cable connections.
Check the gray and black wires on the left side. One is for the wireless board and if I recall if not connected prevents ds from turn on.
the red and black power cables in the right.
and the 2 flat cables also in the right.

Better be safe than sorry or you may just brick your device for good.
If it doesn't work take it to a repair shop would be the safest move.

Anyway good luck. If you have any more question please feel free to ask and we can try to help you.
 
Last edited by KGBEER,

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece
@JackGR
Well it seems your don't have much of experience with circuit boards so I would recommend you to be safe and don't try anything your are not familiar.
Second the video is not for old dsi, is for the very old DS PHAT. After that there's DS LITE. And after the regular DSi and yours it's DSi XL.
Which means 3 models later which may have many variation on circuit board.

You should try before doing anything it's check for any loose or broken cable connections.
Check the gray and black wires on the left side. One is for the wireless board and if I recall if not connected prevents ds from turn on.
the red and black power cables in the right.
and the 2 flat cables also in the right.

Better be safe than sorry or you may just brick your device for good.
If it doesn't work take it to a repair shop would be the safest move.

Anyway good luck. If you have any more question please feel free to ask and we can try to help you.
Thanks a lot for this. I have checked all the cables and they are good connected. I have tear down other ds's too without problems and this is the only one. and the only xl that i have. Im just not good at english (sorry for that) anyways i dont have repair shops in my place so i want to fix it by myself if it is possible. Im thinking of ordering a new board but im not pretty sure if it work (i mean a power board)
 

MyDePain

Well-Known Member
Member
Joined
Nov 23, 2016
Messages
127
Trophies
0
XP
1,073
Country
France
Thanks a lot for this. I have checked all the cables and they are good connected. I have tear down other ds's too without problems and this is the only one. and the only xl that i have. Im just not good at english (sorry for that) anyways i dont have repair shops in my place so i want to fix it by myself if it is possible. Im thinking of ordering a new board but im not pretty sure if it work (i mean a power board)
(I'm French, sorry for my English. Please let me know if I made any grammar mistake.) Noob here, but I have the exact same problem as you (except that it did that after trying to fix my cameras [and cleaning the L&R buttons]). I still have to check with a multimeter (or maybe try with a new powerboard) but it might come from the fuse the battery is connected to, where it is seated.

Let me know if you find anything to fix it, I'm sure it can help me too !
 

JackGR

Well-Known Member
OP
Newcomer
Joined
May 12, 2020
Messages
60
Trophies
0
Age
21
Location
Greece
XP
155
Country
Greece
so do i have to order a new power board? do you have any site for me to order ? i live in europe too (greece) so if you have any europe related site that would help a lot!
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Veho @ Veho: The cybertruck is a death trap.