Hacking 3DS NOOB PARADISE - Ask questions here

[TurdPooCharger]

Thank you for replying (you're gold)....

It was brand new never connected to anything, used ntr card hax to applt b9s, used gm9 to do eur ctr transfer and only then did I connect to internet and update to latest

I guess I'm wanting to system format to see if I can get shot of the Japanese notifications and now it's kinda 100% euro it will only display english ones after a format.

Edit... I've just tried to access the European eshop and I get the below error message

-snip-

Does this mean I'm f*cked then ?

Can I still system format safely ?

TIA

You can Format System Memory at any time, but I don't think that'll solve the 007-2001 error code of being locked out of EUR eShop. Was your n3DSLL a special edition with preinstalled demos or bundled game titles? If it was, yours might have been already locked in to JPN eShop when those were preinstalled at factory.

***

Some have reported successfully region changing their [ n3DS / n3DSXL ] with access to that adopted region's eShop. The process involves System Transfer between two n3DS(XL) systems {not sure if one has to be legit or native to the target region}, unlinking + relinking + creating new NNID, system reformat, and sysnand restores.

• [r/3dshacks] Someone reportedly connected a region changed N3DS to the eshop
• [r/3dshacks] Eshop access work around for Region Changed N3DS.
• [r/3dshacks] Method for making a region changed New 3ds access the eshop (Even when it already accessed the eshop in a previous region)
• [GitHub, hacks-guide/Guide_3DS] Possible work around/Eshop access on region changed 3DS (issue #798)
  
• [yifan.lu] Opening Up CARDBOARD: Crafting an American New 3DS (non-XL)

***

I believe this might be a way to gain EUR eShop access on your JPN n3DSLL by spoofing or injecting its ITCM at boot with a (real), unbanned EUR n3DSXL's OTP.

• [Release] Luma3DS mod to "unban" a console with 022-2812
• ITCM - instructions tightly coupled memory
• OTP - 'One time protection' containing console unique identifiers permanently flashed or burnt to the ARM SoC/CPU.

 

[peteruk]

You can Format System Memory at any time, but I don't think that'll solve the 007-2001 error code of being locked out of EUR eShop. Was your n3DSLL a special edition with preinstalled demos or bundled game titles? If it was, yours might have been already locked in to JPN eShop when those were preinstalled at factory.

***

Some have reported successfully region changing their [ n3DS / n3DSXL ] with access to that adopted region's eShop. The process involves System Transfer between two n3DS(XL) systems {not sure if one has to be legit or native to the target region}, unlinking + relinking + creating new NNID, system reformat, and sysnand restores.

• [r/3dshacks] Someone reportedly connected a region changed N3DS to the eshop
• [r/3dshacks] Eshop access work around for Region Changed N3DS.
• [r/3dshacks] Method for making a region changed New 3ds access the eshop (Even when it already accessed the eshop in a previous region)
• [GitHub, hacks-guide/Guide_3DS] Possible work around/Eshop access on region changed 3DS (issue #798)
  
• [yifan.lu] Opening Up CARDBOARD: Crafting an American New 3DS (non-XL)

***

I believe this might be a way to gain EUR eShop access on your JPN n3DSLL by spoofing or injecting its ITCM at boot with a (real), unbanned EUR n3DSXL's OTP.

• [Release] Luma3DS mod to "unban" a console with 022-2812
• ITCM - instructions tightly coupled memory
• OTP - 'One time protection' containing console unique identifiers permanently flashed or burnt to the ARM SoC/CPU.

It is indeed a special edition, it's a Smash Bros New 3ds LL (and it's beautiful, I always wanted one and it cost me a fortune to import from Japan)

There were 2 pre installed titles (not games though) they were flipnote and some sort of movie application

I will have a good read of everything you've posted above and see what I can do

I haven't tried to download game updates yet, that's a biggie for me, I hope I'll be able to do it

I'll certainly let you know how I get on, thank you as ever for all your help and suggestions

EDIT - just read all you wrote, I could certainly come up with a donor OTP (I've a load of back up's from previously owned consoles and I think I may have some OTP as well, also friendseed codes)

Just wonder if OTP injection is dangerous though, sounds dangerous - but then with a nand backup and GM9 I should be ok right ? lol

 

[TurdPooCharger]

I believe OTP injection can be dangerous in specific scenarios, not due to serious or permanent harm to the 3DS firmware or hardware, but from the possibility of getting hyperbanned if Nintendo catches your (source) system and (target) systems borrowing that (source)'s OTP are signed online at the same time.

If I were you, I would avoid OTP→ITCM injection for the time being. Let its development stew for a bit longer and wait for incoming reports for those brave enough to try it and document their findings.

If you do plan to use OTP→ITCM injection, my advice is to only inject the donor's EUR n3DSXL OTP for single session eShop visits → turn off n3DSLL → turn back on with no injection in place.

 

[3DSBricker]

Thank you for replying (you're gold)....

It was brand new never connected to anything, used ntr card hax to applt b9s, used gm9 to do eur ctr transfer and only then did I connect to internet and update to latest

I guess I'm wanting to system format to see if I can get shot of the Japanese notifications and now it's kinda 100% euro it will only display english ones after a format.

Edit... I've just tried to access the European eshop and I get the below error message

Does this mean I'm f*cked then ?

Can I still system format safely ?

TIA

There is someone on reddit who explains how to make it work after an Japan to European Ctrtranfer.
In short terms you needed to delete your NNID with wifi on in you JAPANESE firmware. And then back to European. I will post a photo (screenshot) with his text.

 

[peteruk]

There is someone on reddit who explains how to make it work after an Japan to European Ctrtranfer.
In short terms you needed to delete your NNID with wifi on in you JAPANESE firmware. And then back to European. I will post a photo (screenshot) with his text.

Thanks mate, I shall have a read after posting

I have never added an NNID at all yet, I simply tried to access the eShop on the euro shop and got the error code, I had never even turned wifi on in Japan mode when I bought it.

 

[3DSBricker]

I know but the poster on Reddit also did not have any NNID linked. He said that there was some account linked to your Serial Number. I don't know how good your Japanese is but you need to go into the settings of the JPN firmware.

 

[lone_wolf323]

.

I dont really get what they are even going on about with just that one screen you posted. Just goes on about removing a account and a serial number. but not to actually sign in to the eshop.

 

[3DSBricker]

https://www.reddit.com/r/3dshacks/c...gion/?utm_medium=android_app&utm_source=share

 

[lone_wolf323]

.

That just made things worse. 1 Its a old 3ds they used. 2 it doesnt say they outright got onto the eshop. both times they said they met with that error.

 

[3DSBricker]

That just made things worse. 1 Its a old 3ds they used. 2 it doesnt say they outright got onto the eshop. both times they said they met with that error.

Sorry i was a bit late but there is too much text for my phone so i posted the link where they had succes.

 

[peteruk]

I really do appreciate you guys trying to help me, not sure of what steps to take next but I'll have a bash later on today when I wake up a bit more.

 

[peteruk]

@TurdPooCharger So I gave system format a try, just for the heck of it...... as you rightly stated didn't fix the eShop problem but it did fix the notifications problem where i was receiving both english & japanese notifications

I think I'm gonna go ahead and make an actual thread detailing everything I've tried to see if I can get a little more exposure and hopefully a solution

 

[saito1234]

TurdPooCharger said:
You bricked your DS(i) mode.

First try system updating with Recovery Mode or System Settings.

If that doesn't work, use TWLFix-CFW followed by system updating in either Recovery Mode or System Settings.

If that still doesn't work, download the five (5) TWL system titles CIAs with torrent client, install them in FBI, and then try again in system updating.

But if I do a system update will Luma 6.6 still work on the new FW?...
Is this the only way?

 

[TurdPooCharger]

But if I do a system update will Luma 6.6 still work on the new FW?...
Is this the only way?

Update the custom firmware.

• A9LH to B9S

 

[grey72]

Is there any way to get the english system menu or a translation of it on a Japanese 3DS LL without a region change?

If region change is the only option, what's the latest guide for it and is it safe/would you recommend doing it?

 

[Deleted member 516800]

Does hiyacfw work properly on 3ds?

 

[Alexander1970]

Hello.

Does hiyacfw work properly on 3ds?

I do not think so,because it is a DSi Custom Firmware.

 

[3DSBricker]

Hello.



I do not think so,because it is a DSi Custom Firmware.

Yeah i think he meant Luma or Twilight menu wich works great

 

[UltraSUPRA]

What happened?

 

[lone_wolf323]

What happened?

Your 3ds done crashed is what happened.