ROM Hack WIP Pokémon Sword & Shield (v1.1.0) CFW/EMU Cheat Codes

LuciferMorningstar

Well-Known Member
Newcomer
Joined
Jan 10, 2020
Messages
56
Trophies
0
Age
30
XP
126
Country
United States
On a side note I just got to the wild area on my fresh save account and have traded over 350+ Pokemon all ultra shiny and have used roughly 50 battle ready level 100 ultra shinies pkhex edited in online battles including a non shiny edited blastoise. I will update if I get banned. That would be a tragedy though lol.


Edit with all the new eBay monsters being listed it seems unlikely I get banned for a Blastoise . I got scared and released my ultra shiny level 4 Mewtwo and level 4 ultra shiny zamazenta. Keeping Blastoise though cuz truck it
 
Last edited by LuciferMorningstar,

Th3Alic3

Well-Known Member
OP
Member
Joined
Jan 3, 2020
Messages
345
Trophies
0
Age
41
XP
859
Country
Canada
i would surely like to test new codes for v1.1

There is nothing stopping you from this OTHER than the simple fact there are no "new" codes out there. There's been some alterations (using Bulbapedia's item list with the Top Bag edit codes) and amalgamations (code mashing the two shiny codes together) but I have NOT seen anything new in close to a month for version 1.1.0.

I have been watching out for anything new but nothing has popped up.

The following codes that don't exist that I consider must haves include:
  • Set all Active Pokémon's "Current Battle HP" value to 0 (this what the original v1.0.0 1HKO code did)
  • Set Den's "Stars" value (0 to 4) when clicked on (one the opening topic is the code to set the "DenType" only)
  • Set Den's "RandRoll" value (0 to 99 where 0 means 100) when clicked on (one the opening topic is the code to set the "DenType" only)
  • Set Den's "Flags" value (necessary to set Wishing Piece Beams to Promoted Nests) when clicked on (one the opening topic is the code to set the "DenType" only)
  • Reset Encounter flag for Eternatus Encounter (this would allow rebattles)
  • Reset Encounter flag for Zacian/Zacian Encounter (this would allow rebattles)
  • Reset Gift Encounter flag for Charmander GMax Egg
  • Reset Gift Encounter flag for Type:Null
  • Activate Mystery Gift flag for Item: *And458 (Dual Pre-Order Bonus - Item does nothing if hacked/coded in without activation)
  • Activate Mystery Gift flag for Item: *And15 (Dual Pre-Order Bonus - Item does nothing if hacked/coded in without activation)
(I doubt we are receiving any more Dynamax Crystals as they were conceived in advance of the Expansion Packs so the last two are becoming less and less of a priority in my mind.)

I updated the opening topic's Den Beam codes to reflect PKHeX's terminology ("Den Type") and value labeling. This should help bridge the codes for people who use PKHeX to do the same thing.

Nobody gives a damn about individually giving there Pokemon no good values

Competitively trained Pokémon for official tournaments commonly use one or two 0 IV stats on their mons depending upon the team configuration.

(There's nothing from you or anyone else who feels the same to combine the 6 separate Best IV codes into a single one for individual purposes. There's no benefit to the rest of the forum bad mouthing others simply because you may not use a code. Not every code is for every person.)
 
Last edited by Th3Alic3,
  • Like
Reactions: LuciferMorningstar

LuciferMorningstar

Well-Known Member
Newcomer
Joined
Jan 10, 2020
Messages
56
Trophies
0
Age
30
XP
126
Country
United States
37A last 3 digits for eternatus wild encounter. Like @Th3Alic3 said earlier in the forum the last 3 digits in the encounter codes are the national dex number converted from decimal to hex

[v1.1.0 Always Encounter: Eternatus]
08000000 007704A8 0000037A 00000000
 
Last edited by LuciferMorningstar,

Th3Alic3

Well-Known Member
OP
Member
Joined
Jan 3, 2020
Messages
345
Trophies
0
Age
41
XP
859
Country
Canada
Anyone found the code for Eternatus? =P

I assume you mean the "Reset Encounter flag for Eternatus Encounter (this would allow rebattles)" that I mentioned above. I am unsure it will be that simple as there's likely multiple story flags involved with the post League story with the Twins. You likely would have to reset all of those flags. (If you have CFW, you are WAY better off just saving before the encounter and creating a back-up save prior to the encounter. Each time you catch it from the back-up save - send it to Home before you revert your save to your current save.) At present, I have not seen any indication this.

If you want an illegal encounter version (as @LuciferMorningstar mentioned), you can use the encounter code. The form flag in the code may need to be adjusted but I am unsure - if you see the story-only (aka illegal) ginormous one - you will know the form flag in the code is wrong.
 
Last edited by Th3Alic3,
  • Like
Reactions: LuciferMorningstar

PokeGen

Active Member
Newcomer
Joined
Jan 13, 2020
Messages
38
Trophies
0
Age
36
XP
234
Country
United States
I followed what Lucifer said but it seems to crash the console xD All the others did work well though. Also, How can we force a pokemon to be Gmaxed? Like Melmetal. I've seen a few people hosting Gmax Melmetal lol
 
  • Like
Reactions: LuciferMorningstar

LuciferMorningstar

Well-Known Member
Newcomer
Joined
Jan 10, 2020
Messages
56
Trophies
0
Age
30
XP
126
Country
United States
Not sure about gmax stuff. Pretty skeptical about online codes with my first switch being banned. But I would assume you could just use @Th3Alic3 purple den code along with the encounter code. Or there is always pkhex . I bought a 3ds recently and am currently playing through x Omega Ruby and sun to pass the time until the June update. Also looking forward to the new Pokemon release this Friday the 28th but other than that sword is pretty much dead for me until june
 

LuciferMorningstar

Well-Known Member
Newcomer
Joined
Jan 10, 2020
Messages
56
Trophies
0
Age
30
XP
126
Country
United States
I followed what Lucifer said but it seems to crash the console xD All the others did work well though. Also, How can we force a pokemon to be Gmaxed? Like Melmetal. I've seen a few people hosting Gmax Melmetal lol

The form flag Alice is talking about is in the 0000000 part of the code I think so there may need to be some adjustments there. Not exactly sure what numbers/letters are needed so I can't help you there
 

Th3Alic3

Well-Known Member
OP
Member
Joined
Jan 3, 2020
Messages
345
Trophies
0
Age
41
XP
859
Country
Canada
The end of the code "00000000" used the last digit so: 0000000R
R
for the FORM

The form refers to things like Regional Variants and West vs East Shellos. I only mentioned it with Eternus because I have seen online images of people forcing wild encounters with the super sized version which if you catch is 100% illegal (for those that care about that kind of thing.)

The form flag does not influence the GMax condition. (This is another portion of the memory and as such would be a separate code for someone to hunt.)

Of an interesting note on the form: Kantonian Slowpoke IS NOT programmed into the game. The code in the game for it is intentionally missing.

it seems to crash the console
As I stated before, if you don't have the correct form flag... you are likely calling a form of Eternus reserved in memory for cut-scenes. (This is why I stated the best way to "Always Encounter Eternus" is to use a Checkpoint back-up of the game prior to the encounter.)

looking forward to the new Pokemon release this Friday the 28th
Yeah... it will be fun learning about this mon (even though I doubt it will appear in-game prior to the expansions since the film is months away):

pokemonspadascudo-pokemonmisterioso_jeag.2560.jpg
 
Last edited by Th3Alic3,
  • Like
Reactions: LuciferMorningstar

PokeGen

Active Member
Newcomer
Joined
Jan 13, 2020
Messages
38
Trophies
0
Age
36
XP
234
Country
United States
So to confirm what both Lucifer and Alice stated.. Gmax Melmetal would be this :

08000000 007704A8 00000329 0000000R

? Or did I mess it up again? Thank you by the way for the assistance =)
 

LuciferMorningstar

Well-Known Member
Newcomer
Joined
Jan 10, 2020
Messages
56
Trophies
0
Age
30
XP
126
Country
United States
[(v1.1.0) Set Interacted Den's Den Type value to 4 "Rare Wishing Piece Beam" (Hold R)]
04000000 0137DFFC B9400048
04000000 0137E004 B9400048
80000080
04000000 0137DFFC 52800048
04000000 0137E004 52800048
20000000


[v1.1.0 Always Encounter: Melmetal]
08000000 007704A8 00000329 00000000

[v1.1.0 Always Encounter (Activation Code)]
04000000 007704E0 B9402A68
04000000 0077050C B9402A61
04000000 007705DC B9402A60
04000000 00770640 B9402A60
04000000 00770518 79405A61
04000000 007705E4 79405A61
04000000 00770644 79405A61
04000000 007704E0 18FFFE68
04000000 0077050C 18FFFD01
04000000 007705DC 18FFF680
04000000 00770640 18FFF360
04000000 00770518 18FFFC81
04000000 007705E4 18FFF621
04000000 00770644 18FFF321

--------------------- MERGED ---------------------------

So to confirm what both Lucifer and Alice stated.. Gmax Melmetal would be this :

08000000 007704A8 00000329 0000000R

? Or did I mess it up again? Thank you by the way for the assistance =)

You messed it up. We were talking about forms as in different versions of each pokemon. Like regular meowth and alola meowth. Use the 3 codes i just took off @Th3Alic3 first page simultaneously and enter a battle in a purple beam den and it should trigger gmax melmetal. You might also need the no gender code as well to avoid the black pokeball glitch
 
Last edited by LuciferMorningstar,

Th3Alic3

Well-Known Member
OP
Member
Joined
Jan 3, 2020
Messages
345
Trophies
0
Age
41
XP
859
Country
Canada
The important thing to remember is that the game does not MAGICALLY fix your mistakes while cheating. The game does not MAGICALLY realize you changed the Pokémon or aspect about the Pokémon when you use codes to encounter Wild and Raid Pokémon.

For example:
You used the Encounter code to change ALL Wild and Raid Pokémon to a Vespiqueen (whose gender in game is FEMALE only.)
What do you think happens when you use that same code to encounter a Wild Throh (whose gender in the game is MALE only.)

The game doesn't MAGICALLY fix your mistakes while cheating so you have now encountered a MALE Vespiqueen so surprise/surprise that Black Ball Icon appears on your mon because it's an illegal creation.
 
  • Like
Reactions: LuciferMorningstar

LuciferMorningstar

Well-Known Member
Newcomer
Joined
Jan 10, 2020
Messages
56
Trophies
0
Age
30
XP
126
Country
United States
What would we do without you @Th3Alic3 . You are quite good at explaining things in tremendous detail. To add to that I'm gonna say, whilst cheating for specifically encounter mods, knowing the gender of a pokemon is crucial.
 

Th3Alic3

Well-Known Member
OP
Member
Joined
Jan 3, 2020
Messages
345
Trophies
0
Age
41
XP
859
Country
Canada
Hey did anyone update the exp multiplier codes from 1.0? or do they not need to be updated ?

If you want to try out the v1.0.0 code (without saving your game obviously) on v1.1.0, you are more than welcome to share the results.(I personally find it so much less efficient than using EXP Candy that I personally will not be investing the time to find out.)
 

jpmasterflex

Well-Known Member
Member
Joined
Jan 14, 2016
Messages
130
Trophies
0
Age
29
XP
1,617
Country
United States
If you want to try out the v1.0.0 code (without saving your game obviously) on v1.1.0, you are more than welcome to share the results.(I personally find it so much less efficient than using EXP Candy that I personally will not be investing the time to find out.)

Oh i see..the the experience codes are the only ones i ever use in pokemon games..and maybe two others...I prefer to grow faster while playing then having to spam items to grow faster
 

Atratus

Member
Newcomer
Joined
Dec 24, 2018
Messages
16
Trophies
0
Age
39
XP
518
Country
United States
[v1.1.0 Set Interacted Den's Den Type value to 3 "Common Wishing Piece Beam" (Hold R)]
04000000 0137DFFC B9400048
04000000 0137E003 B9400048
80000080
04000000 0137DFFC 52800048
04000000 0137E003 52800048
20000000
[v1.1.0 Set Interacted Den's Den Type value to 4 "Rare Wishing Piece Beam" (Hold R)]
04000000 0137DFFC B9400048
04000000 0137E004 B9400048
80000080
04000000 0137DFFC 52800048
04000000 0137E004 52800048
20000000
[v1.1.0 Set Interacted Den's Den Type value to 0 "No Beam" (Hold L)]
04000000 0137E06C 39C1C900
80000040
04000000 0137E06C 52800000
20000000

I have not been able to get this set of codes to work on my 1.1.0 shield. Anybody been able to get them to work?
 

Site & Scene News

Popular threads in this forum

Recent Content

General chit-chat
Help Users
  • No one is chatting at the moment.
    Xdqwerty @ Xdqwerty: good night