Hacking Question Nintendo Logo Stuck after ChoiDujourNX Firmware Update

[GerBrew]

I was on Atmosphere 0.9.1 and wanted to update my Nintendo Switch Firmware from 8.0.1 to 8.1.0 via ChoiDujourNX 1.0.2.
So I do everything exactly like in the endless tutorials online and choose 8.1.0 (exFAT) because my SD is a exFAT. After waiting for the 30 Seconds Countdown to be finished my System reboots as it should be. So far so good. Unfortunately after the Switch reboots it’s stuck on the Nintendo Switch Logo. If i try to load Atmosphere via TegraRCM it’s looks like everything is fine, I see the Atmosphere logo and all but when the Switch Logo comes it’s Stuck again. Unfortunately for me I didn’t made any backup.
I don’t care if all my Files are going to be gone I just want my Switch to work again. Is there anything I can do to fix my switch? As I said I don’t care about all the Files, I just want my Switch to work again.
Thank you so much for reading and hopefully you have a idea how I can fix the problem.

 

[210modz]

Try booting without the sd card.

 

[PHiLiPZ]

Are you using fusee-primary instead of (or chainloaded from) hekate?

 

[issayloki]

I was on Atmosphere 0.9.1 and wanted to update my Nintendo Switch Firmware from 8.0.1 to 8.1.0 via ChoiDujourNX 1.0.2.
So I do everything exactly like in the endless tutorials online and choose 8.1.0 (exFAT) because my SD is a exFAT. After waiting for the 30 Seconds Countdown to be finished my System reboots as it should be. So far so good. Unfortunately after the Switch reboots it’s stuck on the Nintendo Switch Logo. If i try to load Atmosphere via TegraRCM it’s looks like everything is fine, I see the Atmosphere logo and all but when the Switch Logo comes it’s Stuck again. Unfortunately for me I didn’t made any backup.
I don’t care if all my Files are going to be gone I just want my Switch to work again. Is there anything I can do to fix my switch? As I said I don’t care about all the Files, I just want my Switch to work again.
Thank you so much for reading and hopefully you have a idea how I can fix the problem.

May be you can try factory system reset first since you not care about losing all file. Then see what happend after factory reset.Also if you can still boot in hekate at lease back up boot0 boot1 biskey proinfo as well

 

[GerBrew]

Try booting without the sd card.

I Can still use ,,Hekae_ctcaer_4.9.1’’ if that helps.

--------------------- MERGED ---------------------------

Are you using fusee-primary instead of (or chainloaded from) hekate?

I Use the fusee-primary from the Atmosphere 0.9.1 Github. It still works, it’s just that after the Nintendo Logo comes up it’s stuck.

--------------------- MERGED ---------------------------

May be you can try factory system reset first since you not care about losing all file. Then see what happend after factory reset.Also if you can still boot in hekate at lease back up boot0 boot1 biskey proinfo as well

Of course I could try this but maybe there is a way without deleting my Switch. Factory Reset is Plan Z.

 

[Hayato213]

Try grabbing fresh atmosphere file, it is not recommend to use exfat especially if you are using homebrew apps that write a lot, can create file corruption. Also where did you grab that update file? It is important where you get the update file from, people had ran into problem before.

 

[GerBrew]

Try grabbing fresh atmosphere file, it is not recommend to use exfat especially if you are using homebrew apps that write a lot, can create file corruption.

So what should I do? Save my SD Card Files, Format it to FAT32, put everything back and delete my old Atmosphere Files and replace them with a fresh 0.9.1?

 

[wicksand420]

Erase your custom theme from the atmosphere titles folder, its sd:/atmosphere/titles/1000000011 just erase the 1000000011 folder

 

[Hayato213]

So what should I do? Save my SD Card Files, Format it to FAT32, put everything back and delete my old Atmosphere Files and replace them with a fresh 0.9.1?

Any custom theme ?

 

[issayloki]

Do you have a spare sd card?, format to fat32 and just only put ATM on the card and use fusee for payload, that what I would try to see if it something to do with your file in card or not.

 

[wicksand420]

Trust me, its the theme

 

[issayloki]

Past a few day so many ppl got problem when they using choi. Either stuck on nintendo logo, black screen or the worst is blue screen.

 

[GerBrew]

Any custom theme ?

I deleted my Atmosphere stuff from the SD and

Trust me, its the theme

No. I paid attention to uninstall the Theme before I Install 8.1.0.
I deleted just in this moment all my Atmosphere stuff (With it too the Theme in the Atmosphere folder) and replaced it with fresh new Atmosphere 0.9.1 Files and now the Switch Logo is gone. Everything is the same but instead of the Switch Logo now there’s just Black.

 

[wicksand420]

Did you fat32 format your sd?

--------------------- MERGED ---------------------------

also I think you need to use the fusee payload to boot, I don't think hekate is fixed for the latest fw yet

If you aren't sure, its the fusee primary payload on here at the top of the list https://github.com/Atmosphere-NX/Atmosphere/releases

 

[GerBrew]

Do you have a spare sd card?, format to fat32 and just only put ATM on the card and use fusee for payload, that what I would try to see if it something to do with your file in card or not.

Just tried it with a New different SD with FAT32 and it won’t work.

 

[wicksand420]

Are you using the latest fusee payload?

 

[GerBrew]

Did you fat32 format your sd?

--------------------- MERGED ---------------------------

also I think you need to use the fusee payload to boot, I don't think hekate is fixed for the latest fw yet

If you aren't sure, its the fusee primary payload on here at the top of the list https://github.com/Atmosphere-NX/Atmosphere/releases

I use exFAT and until now it worked perfectly. It tried it with a New Different SD card with FAT32 and it still doesn’t work.

--------------------- MERGED ---------------------------

Are you using the latest fusee payload?

Yes.

 

[eyeliner]

In the black screen, pressing the volume button, do you see anything?

 

[GerBrew]

In the black screen, pressing the volume button, do you see anything?

Nope.

 

[eyeliner]

Nope.

Bummer. Was hoping you had some kind of visual input.

Try to reapply your backup.