Hacking Question What happens when a console runs out of battery with AutoRCM turned on?

mariogamer

Well-Known Member
Member
Joined
Aug 12, 2015
Messages
1,256
Trophies
0
Age
28
XP
790
Country
Canada
Seems like, in horizonFW, charges at +1632Mhz while in autorcm only +55Mhz
That's specifically an autorcm issues, not rcm.

So, Switch charges and does not charges in RCM. xD

The results (battery was 89%):


The switch can charge normally the battery, if the BCT is intact!
In RCM AND in hekate menu.
*BCT is the boot configuration table that autoRCM corrupts.

Tests showed that it was charging with the same current, as in Horison OS.
The current it was drawing with 89% battery, was 800mA - 1000mA, using Switch wall adapter. On PC, it was the max the hub could give.


------------------------------------


The switch cannot charge normally with a corrupt BCT (AutoRCM).
In hekate, it shows similar behavior (read below).

Extra emphasis on the "normally".

With autoRCM, basically a corrupt BCT, the switch behaves differently.
There are 2 behaviors that I saw when connecting to the switch wall charger:
  • Common - It was draining 140-250mA.
  • Common (in hekate) - 200mA - 400mA
  • Rare (normally if you connect charger after powering off from HOS) - Drain of alternating 250mA and 1000mA, with surges of 2.5A.

------------------------------------

Summary - facts:
  1. Switch can charge completely normally in RCM or Hekate with a BCT intact
    • The percent % in Horizon OS, after a RCM charge, is not fake.
  2. Switch does not charge normally with AutoRCM, a.k.a corrupt BCT.
    1. Either it charges very slowly or sometimes with a broken slow/fast/slow/fast charge pattern:
    2. Or this behavior is current taken from the USB controller or the BPMP (Nvidia's Boot and Power management processor)
    • In AutoRCM, the Charge IC probably can't update the battery calibration file and could make the percent fake.
I don't know for behavior .3 what really happens and what Switch does. This can be easily examined, by connecting a current multimeter between battery and switch and check the readings.

But it does charge.
 
Last edited by mariogamer,

M7L7NK7

Well-Known Member
Member
Joined
Oct 16, 2017
Messages
3,892
Trophies
1
Website
youtube.com
XP
5,952
Country
Australia
If mine goes flat I inject a payload, then immediately plug the AC adaptor into the Switch and it will sit on the black screen with the battery icon in the top left, when it gets to 1% it will boot into cfw automatically
 

Captain_N

Well-Known Member
Member
Joined
Mar 29, 2010
Messages
1,903
Trophies
2
XP
2,014
Country
United States
The entire battery charging problem is really damn dumb. The battery should charge regardless of the mode. a separate circuity should control the battery charge. should have nothing to do with booting. Why design it that way?
the entire charging control sould work independent of the cpu
 

Mr. Wizard

Ending the spread of bullshit one thread at a time
Member
Joined
Mar 20, 2015
Messages
1,814
Trophies
0
Location
E8 lattice
XP
1,532
Country
Canada
The entire battery charging problem is really damn dumb. The battery should charge regardless of the mode. a separate circuity should control the battery charge. should have nothing to do with booting. Why design it that way?
the entire charging control sould work independent of the cpu
It does. That is why the switch still charges with USB spec minimums. ~5v100ma.
In order to get faster charging you need smart circuitry since it's dealing with much higher wattage.
If you think it's so stupid, why not redesign it then? Try not to blow yourself up.
 

Captain_N

Well-Known Member
Member
Joined
Mar 29, 2010
Messages
1,903
Trophies
2
XP
2,014
Country
United States
It does. That is why the switch still charges with USB spec minimums. ~5v100ma.
In order to get faster charging you need smart circuitry since it's dealing with much higher wattage.
If you think it's so stupid, why not redesign it then? Try not to blow yourself up.

what im saying is the charging circuit should have nothing to do with the cpu, whether the console is booted or in sleep mode. it should charge the battery regardless. Does a laptop battery charging circuit care if the laptop is on,off,sleep? no it does not it just charges the battery. so if i brick a bios chip the battery still charges.
 

Mr. Wizard

Ending the spread of bullshit one thread at a time
Member
Joined
Mar 20, 2015
Messages
1,814
Trophies
0
Location
E8 lattice
XP
1,532
Country
Canada
what im saying is the charging circuit should have nothing to do with the cpu, whether the console is booted or in sleep mode. it should charge the battery regardless. Does a laptop battery charging circuit care if the laptop is on,off,sleep? no it does not it just charges the battery. so if i brick a bios chip the battery still charges.
Have you ever drained a laptop battery beyond what the PD controller says is completely flat?
Just because your laptop says the battery is dead, it isn't "completely" dead, there is enough reserve to initialize the controller.
If you were to drain that battery further you would be in the same situation as the switch, since in RCM there is no PD controller safeguard to turn off the device at a certain point. I think you need to do some more research.
 
Last edited by Mr. Wizard,

Captain_N

Well-Known Member
Member
Joined
Mar 29, 2010
Messages
1,903
Trophies
2
XP
2,014
Country
United States
Have you ever drained a laptop batter beyond what the PD controller says is completely flat?
Just because your laptop says the battery is dead, it isn't "completely" dead, there is enough reserve to initialize the controller.
If you were to drain that battery further you would be in the same situation as the switch, since in RCM there is no PD controller safeguard to turn off the device at a certain point. I think you need to do some more research.

yeah i know what happens when a battery is actually 100% dead. I have had to fix some by bypasing the board and giving the battery some charge.
so heres my question then, why no safeguard? is it no possible?
 

Mr. Wizard

Ending the spread of bullshit one thread at a time
Member
Joined
Mar 20, 2015
Messages
1,814
Trophies
0
Location
E8 lattice
XP
1,532
Country
Canada
yeah i know what happens when a battery is actually 100% dead. I have had to fix some by bypasing the board and giving the battery some charge.
so heres my question then, why no safeguard? is it no possible?
Well, it is but you were never meant to be in RCM anyway, so I'm pretty sure Reggie doesn't give a fuck.
 

Captain_N

Well-Known Member
Member
Joined
Mar 29, 2010
Messages
1,903
Trophies
2
XP
2,014
Country
United States
Well, it is but you were never meant to be in RCM anyway, so I'm pretty sure Reggie doesn't give a fuck.

lol yeah. Reggie probably does not even know what rcm is lol.I bet in the future when we have more controll like the 3ds, this problem will be a thing of the past
 

Mr. Wizard

Ending the spread of bullshit one thread at a time
Member
Joined
Mar 20, 2015
Messages
1,814
Trophies
0
Location
E8 lattice
XP
1,532
Country
Canada
lol yeah. Reggie probably does not even know what rcm is lol.I bet in the future when we have more controll like the 3ds, this problem will be a thing of the past
In risk of being off topic, we need a guy like this to join the scene.
 
Last edited by Mr. Wizard,
  • Like
Reactions: Deleted User

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • Xdqwerty @ Xdqwerty:
    also gonna install twilight menu in my r4 flashcard
  • Psionic Roshambo @ Psionic Roshambo:
    One thing that just occurred to me.... The sound on the 2600 sucked less back then the harsh sound we hear now is from infinitely better speakers we have now, back when the 2600 was new speakers produced a almost muffled sound, like CRTs made old graphics look slightly better.
  • Psionic Roshambo @ Psionic Roshambo:
    I wonder if I could recommend that to some emulation devs that perhaps the sound could use some smoothing out to simulate those old TVs
  • Psionic Roshambo @ Psionic Roshambo:
    I think a few of the early systems could benefit from that, at least up to the 8 bit generation, by the 16 bit generation I think TVs had gotten a lot better in almost every way
  • Xdqwerty @ Xdqwerty:
    i dont have an sd card adapter but I have an usb sd card adapter
  • K3Nv2 @ K3Nv2:
    Old people games
  • Xdqwerty @ Xdqwerty:
    its not the one that comes with the r4
  • Xdqwerty @ Xdqwerty:
    doesnt work (my flashcard is from r4isdhc.com)
  • Xdqwerty @ Xdqwerty:
    might install ysmenu first
  • Psionic Roshambo @ Psionic Roshambo:
    Try Wood firmware
  • Psionic Roshambo @ Psionic Roshambo:
    For your R4
  • Psionic Roshambo @ Psionic Roshambo:
    It's old but it's the best firmware out for DS stuff
  • Xdqwerty @ Xdqwerty:
    it says it only works for the original R4, R4i Gold (r4ids.cn), R4iDSN (r4idsn.com) and Acekard R.P.G.
  • Xdqwerty @ Xdqwerty:
    nvm it does support mine
  • Xdqwerty @ Xdqwerty:
    but why choose it over ysmenu @Psionic Roshambo?
  • Xdqwerty @ Xdqwerty:
    bc im stupid?
  • Xdqwerty @ Xdqwerty:
    yea ik im stupid
  • Xdqwerty @ Xdqwerty:
    good night
  • Psionic Roshambo @ Psionic Roshambo:
    Just give it a try, but honestly if you have a 3DS you can play DS games without a card just off the internal SD card
  • Psionic Roshambo @ Psionic Roshambo:
    Slightly slower loading but a bit more convenient
  • BakerMan @ BakerMan:
    guys, my fuckin headphones have an out of place speaker
  • K3Nv2 @ K3Nv2:
    Did you try wearing them?
    K3Nv2 @ K3Nv2: https://youtube.com/shorts/eJV6GaIEgd4?si=ciLPnlhfd7XcrxQn