Hardware How to install Luma3ds on O3ds LL JPN 9.2????

[Onepunchbruh]

How do I install? Please help..? I have already checked this https://3ds.guide/get-started-(old-3ds-jpn). It's not full luma guide. It just tells you how to launch homebrew & decrypt9. Please if someone knows the full guide provide the link.

Thanks in advance.

 

[Tenshi_Okami]

How do I install? Please help..? I have already checked this https://3ds.guide/get-started-(old-3ds-jpn). It's not full luma guide. It just tells you how to launch homebrew & decrypt9. Please if someone knows the full guide provide the link.

Thanks in advance.

If you read the guide, it will install A9LH and Luma at the same time. So if you started to follow it, just finish the guide

 

[Onepunchbruh]

If you read the guide, it will install A9LH and Luma at the same time. So if you started to follow it, just finish the guide

it only provides me this link https://3ds.guide/get-started-(old-3ds-jpn). There is no next page to it. Where is the main guide?

--------------------- MERGED ---------------------------

& If I use this https://github.com/Plailect/Guide_RedNAND/wiki/Part-3-(RedNAND) old guide. I'm stuck at it becuase when I install rednand & when I try to boot luma it says (An error occur while loading the payloads) I have putted everything it said. So that why I'm asking for the new guide old one doesn't work.

 

[KunoichiZ]

it only provides me this link https://3ds.guide/get-started-(old-3ds-jpn). There is no next page to it. Where is the main guide?

--------------------- MERGED ---------------------------

& If I use this https://github.com/Plailect/Guide_RedNAND/wiki/Part-3-(RedNAND) old guide. I'm stuck at it becuase when I install rednand & when I try to boot luma it says (An error occur while loading the payloads) I have putted everything it said. So that why I'm asking for the new guide old one doesn't work.

You have to click on one of the links that corresponds to your firmware in order to continue. The very first sentence of the page reads "Select the appropriate page for your version from the chart below." Really? :/

 

[Onepunchbruh]

You have to click on one of the links that corresponds to your firmware in order to continue. The very first sentence of the page reads "Select the appropriate page for your version from the chart below." Really? :/

Dude I have done that it only takes make to the guides of which how to use homebrew & decrypt9. There is no next page to them.

--------------------- MERGED ---------------------------

Sorry for the trouble but I have found the small button to continue. My bad didn't see that.

 

[KunoichiZ]

Dude I have done that it only takes make to the guides of which how to use homebrew & decrypt9. There is no next page to them.

Really? Okay, "dude", answer me: have you actually read the pages? On the Decrypt9 (Browser) page, it tells you to continue to the 2.1.0 ctrtransfer after you have done everything on that page. On the Homebrew Launcher (Soundhax) page, it tells you to go to the Decrypt9 (Homebrew Launcher) page, then to the 2.1.0 ctrtransfer page.

On the bottom of the pages, it tells you what to do next if you actually read them.

Do everyone a favor and actually read the pages and every single bit of text on the pages next time.

 

[Onepunchbruh]

Really? Okay, "dude", answer me: have you actually read the pages? On the Decrypt9 (Browser) page, it tells you to continue to the 2.1.0 ctrtransfer after you have done everything on that page. On the Homebrew Launcher (Soundhax) page, it tells you to go to the Decrypt9 (Homebrew Launcher) page, then to the 2.1.0 ctrtransfer page.

On the bottom of the pages, it tells you what to do next if you actually read them.

Do everyone a favor and actually read the pages and every single bit of text on the pages next time.

Sorry for wasting your time & thanks for the help.

 

[Onepunchbruh]

Really?

Hey one question please reply fast. Can I change my 3ds region on this step https://3ds.guide/2.1.0-ctrtransfer. My 3ds is japenese. Can I add Old 3ds USA 2.1.0 ctr?

--------------------- MERGED ---------------------------

???

 

[KunoichiZ]

Hey one question please reply fast. Can I change my 3ds region on this step https://3ds.guide/2.1.0-ctrtransfer. My 3ds is japenese. Can I add Old 3ds USA 2.1.0 ctr?

--------------------- MERGED ---------------------------

???

There was no need for a double post. No, you need to install arm9loaderhax first before you can change your region. With Luma3DS, there's no need to change your 3DS's region. I also don't know anyone who's gotten the eShop to work on a region-changed device so imo, it's not even worth it to change your region.

 

[Onepunchbruh]

There was no need for a double post. No, you need to install arm9loaderhax first before you can change your region. With Luma3DS, there's no need to change your 3DS's region. I also don't know anyone who's gotten the eShop to work on a region-changed device so imo, it's not even worth it to change your region.

My 3ds region is jpn. So I want to change it to USA.

 

[Onepunchbruh]

region.

Hey So How do I do these steps if browser doesn't work on 2.1 3ds?
Section II - Installing arm9loaderhax

1. Reinsert your SD card into your 3DS
2. Do the steps for installing arm9loaderhax on your device:
   • You should be on 2.1.0
   • Go to http://dukesrg.github.io/2xrsa.html?arm11.bin on your 3DS
   • If you get an error, follow this troubleshooting guide
   • If you get a glitched screen, follow this troubleshooting guide
   • Press (Select) to Full Install
   • The installer will now install arm9loaderhax on your device (this is very fast)
   • Shut down your console, hold the power button until it turns off if necessary
   • Copy your console specific OTP.bin from the /a9lh/ folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS

 

[Onepunchbruh]

1. Open GodMode9 from arm9loaderhax by holding (Up) during boot
2. Navigate to SDCARD
3. Press (Y) on nimsavegame.bin
4. Press (B) to go back to the main menu
5. Navigate to SYSNAND CTRNAND -> data -> (32 Character ID) -> sysdata -> 0001002c
6. Press (A) on 00000000
7. Select “Inject data @offset”
8. Press (A) to select the offset 00000000
9. Press (A) to unlock SysNAND writing, then input the key combo given
10. Press (Start) to reboot

I'm not able to find nimsavegame.bin either on my backups or sd.

 

[Onepunchbruh]

So after installing all of the guide my 3ds is intalled with the al9h but the prob is my 3ds 3d is not working good it does'nt show 3d just splits the screen in 4images which I can see instead of 3d. Please help!!!

 

[KanterZ]

Chill, man. What step are you in now? I'll help, no worries.

 

[Onepunchbruh]

Chill, man. What step are you in now? I'll help, no worries.

done all of it luma is installed but prob is as I told in my last comment my 3ds 3d mode stopped working it shows 4images instead of 3d.

 

[KanterZ]

So you have installed arm9loaderhax now on 2.1.0, yes?
(Assuming you have installed it on http://dukesrg.github.io/2xrsa.html?arm11.bin , you should've been transported to LumaCFW Config after reboot.)

Would you take a photo of the screen of your 3DS right now?

 

[Onepunchbruh]

So you have installed arm9loaderhax now on 2.1.0, yes?
(Assuming you have installed it on http://dukesrg.github.io/2xrsa.html?arm11.bin , you should've been transported to LumaCFW Config after reboot.)

Would you take a photo of the screen of your 3DS right now?

I have done this https://3ds.guide/installing-arm9loaderhax & then changed JPN region to USA using this https://3ds.guide/region-changing.

 

[KanterZ]

I have done this https://3ds.guide/installing-arm9loaderhax & then changed JPN region to USA using this https://3ds.guide/region-changing.

So you're on US region now, yes? Correct me if I'm wrong.

 

[Onepunchbruh]

So you're on US region now, yes? Correct me if I'm wrong.

yes

--------------------- MERGED ---------------------------

I'm seeing the same as this image & my other 3ds xl gives perfect 3d. I have also updated it to 11.2 now it's on 11.2 usa

 

[KanterZ]

ye

I'm seeing the same as this image & my other 3ds xl gives perfect 3d. I have also updated it to 11.2 now it's on 11.2 usa

You sure you haven't done anything wrong? If not, then...

Try flip close - flip open-ing your 3DS.

--------------------- MERGED ---------------------------

Also, try using 3D Calibration on System Settings