Hacking Trying to configurate a new CF on a new SD card - It's a mess !

[lionceaudelta]

Good evening everyone, I come here to ask for help, i'm actually trying to set up a new CF on my 8GO SD card. I'm currently using a reinand on one SD card but I encounter lots of problems to set up the new one.

When I did the first one I miracously succeded to do it by my one.
I followed this video :
And I succeced.

But now,
• I can not acces the Homebrew launcher when i am on the SysNand : https://sendvid.com/cgfmwrmx
• The files needed in the youtubes video are not present in the guy's link no more, do you know where I can fint it ?

 

[danwellby]

Firstly do not use video guides they become outdated quickly.

Rx tools is now outdated and is broken with pokemon s&m and the new animal crossing update.

Would recommend using this guide to set up A9Lh+luma. https://plailect.github.io/Guide/get-started

But If you want to keep rx-tools for some reason just copy and paste everything on the old card to the new one

Try this to get ninjahax working clear CUBIC NINJA's savegame and install the exploit again. To do so, enter CUBIC NINJA's main menu and hold L+R+X+Y and then reinstall it

 

[lionceaudelta]

I cannot just copy the content on the first card to the second and hope it will launch a CF when the second is on the 3ds. It needs to be installed !

 

[Zelbano]

As stated by danwllby. Just follow Plailect's guide and you shouldnt have any problems.

 

[danwellby]

@lionceaudelta the only thing that is "installed" booting rx-tools with menuhax, is menuhax I assume you are using on a 9.2 sysnand and a emunand(or rednand) on on a firm later than 9.3

 

[zezzo]

Firstly do not use video guides they become outdated quickly.

Rx tools is now outdated and is broken with pokemon s&m and the new animal crossing update.

Would recommend using this guide to set up A9Lh+luma. https://plailect.github.io/Guide/get-started

But If you want to keep rx-tools for some reason just copy and paste everything on the old card to the new one

Try this to get ninjahax working clear CUBIC NINJA's savegame and install the exploit again. To do so, enter CUBIC NINJA's main menu and hold L+R+X+Y and then reinstall it

Sun and Moon works with RxTools. Don't give out false info

 

[lionceaudelta]

Currently my N3DS is on 9.2 and has nothing on it (cause Rei 11.2 is on the first card).
So ok, i'll follow your guide, but I am stucked to the Homebrew Launcher step, I don't know why, I cannot acces it, both with cubic ninja method and web browser method. (https://sendvid.com/cgfmwrmx) however I did everything right, I put the starter pack on the SD card (8GO) and that's it, but no result.

???

 

[danwellby]

@zezzo does it? Is it only the amibo update for acnl that is broken?

@lionceaudelta reinstall ninjahax as quoted from ninjahax's page https://smealum.github.io/ninjhax2/

> ninjhax won't run anymore! I updated my console after installing ninjhax and I can't access the homebrew launcher anymore. What do I do ?
In this case, all you need to do is clear CUBIC NINJA's savegame and install the exploit again. To do so, enter CUBIC NINJA's main menu and hold L+R+X+Y; after a few seconds, a menu will show up asking whether you'd like to clear your savegame. Do it, grab the QR code for your firmware version and you should be good to go!

 

[insidexdeath]

@lionceaudelta the only thing that is "installed" booting rx-tools with menuhax, is menuhax I assume you are using on a 9.2 sysnand and a emunand(or rednand) on on a firm later than 9.3

Ok clearly you cannot help since you have not even read the OP. Firstly, he does not have rxTools, as it seems he's got Reinand CFW.

Secondly, that guide does not exactly answer his question, as it's a guide to installing A9LH, and since he's having a difficult time even moving from one SD to another, I doubt he would be able to follow the guide properly, which could result into a brick. That's something none of us would want.

As for the OP, I would suggest you plug your SD card in, and go to Data Management in settings for the 3DS to set it up for you, then you need to backup your emuNAND from the old SD and flash it into your new SD card using Hourglass9 or any other tool.

 

[danwellby]

@insidexdeath my fault it is almost impulsive, skimming the text and not reading it correctly and the video tutorial makes me think rxtools is in use at the time

 

[xtheman]

@insidexdeath my fault it is almost impulsive, skimming the text and not reading it correctly and the video tutorial makes me think rxtools is in use at the time

Reinand doesn't work with ancl update either

 

[zezzo]

@zezzo does it? Is it only the amibo update for acnl that is broken?

@lionceaudelta reinstall ninjahax as quoted from ninjahax's page https://smealum.github.io/ninjhax2/

Yeah just the ACNL stuff

 

[lionceaudelta]

Does this mean i succed ? can I update it like i would update the sysnand to have Sys 11.2 without risks ?

 

[lionceaudelta]

Well I manage to do everything I wanted to do. I now have a custom firmware on my 8GO card (sys 10.0)
BUT as I cannot always have no problem, I have an issue : My N3DS now only switch on if it has the 8GO card in it. That mean it cannot now :
•Switch on on EmuNand (no card)
•Switch on on Rei 11.2 (4GO card)

Solutions ?

 

[insidexdeath]

Well I manage to do everything I wanted to do. I now have a custom firmware on my 8GO card (sys 10.0)
BUT as I cannot always have no problem, I have an issue : My N3DS now only switch on if it has the 8GO card in it. That mean it cannot now :
•Switch on on EmuNand (no card)
•Switch on on Rei 11.2 (4GO card)

Solutions ?

You no longer need emuNAND if you've installed A9LH. Your system is set up with Luma CFW, so you're good to go really. So you can forget about ReiNAND CFW, and emuNAND.

 

[trinhno]

You still need access to Homebrew Launcher if you want to transfer your EmuNAND to a new card as it's a hidden partition. But since you're already at 9.2, it's much easier to install A9LH once you can get into HBL and then launch homebrews as Luma payloads.

 

[danwellby]

@trinhno or he can use luma's payload launcher and use the .bin files of emunand9, Decrypt9WIP and hourglass9

 

[lionceaudelta]

It mean I will never be able to use the emunand anymore ? What if I formate my N3DS ?

 

[danwellby]

you can use your emunand, keep Autoboot sysNAND unticked,
but I would move your emunand to your sysnand as it is quicker to boot and you free up around 1-2 GB on your sd card

 

[lionceaudelta]

Where should i go to untick Autoboot sysNAND ?