Hacking [R4][Firmwares] * - Ask For Your R4i-SDHC Clone Firmware! - *
- Thread starter ScarletDreamz
- Start date
- Views 164,288
- Replies 411
- Likes 19
Yes i believe that luma auto patches to make it work, if the system menu detects the cart
is probably not working anymore. Maybe that is why. If the system menu can't detect it, try it in a normal ds system
Is probably not fitting in the system correctly. Try blowing the contacts on the cart then inside the cart slot. Press it gently or firmly into the system, or maybe use that paper trick
I tried the two trick and nothing work
--------------------- MERGED ---------------------------
«Invalid SecureCartID. (12E2B08D != 00000FC2)
Error reading secure area.
The secure area of my R4i is broken....
--------------------- MERGED ---------------------------
«Invalid SecureCartID. (12E2B08D != 00000FC2)
Error reading secure area.
The secure area of my R4i is broken....
you could also try to patch the andna manually usin the whitelist, OR, executing the TW Slot Laucher, it will do the trick.
I thought luma auto patches. It happend to fix my r4 card, it works in my luma cfw but not in my ofw
Besides the problem isn't that the thing won't load, the system won't recognize the card. When inserted the card picture in home menu won't change.
Well either way, if the system can't even recognize the card, i don't think patches would make it work. Is proably the issue with the contacts in the system or card not connecting, or reading properly.
Do you happen to know if there any firmware updater for flashcarts still exist?
- Joined
- Jul 13, 2014
- Messages
- 6,038
- Trophies
- 2
- Age
- 25
- Location
- https://gs2012.xyz
- Website
- gs2012.xyz
- XP
- 5,986
- Country
That cart does not use the whitelist as other carts do iirc, because it was already patched before the 3DS came out, since DSi 1.4.5 cannot use it either. TWL patching will not fix it afaik.
i had a R4I-SDHC very old, with the 1.4.5 logo, and it worked on my 3ds after the white-list patch, there are several cards that got patched among with the 3ds.
The 3ds was release on March 27, 2011, as the last firmware for the DSI which is 1.4.5 was released in December 13, 2012..
So yeah, some cards got blocked for the DSI as well as for the 3DS on the first firmware's, so the earlier the card, the earlier the firmware that got blocked in on the 3ds.
Similar threads
-
Veho
-
K3Nv2
-
DinohScene
That cat suit twink
-
-
-
@
SylverReZ:
@Maximumbeans, Indeed. I've been working on getting this Infecutus chip to work on my PS2. But after soldering, I realised that a plastic piece was missing from the power ribbon cable to the power and eject buttons.
-
@
SylverReZ:
Now I could go with soldering the contacts from the cable to the connector on the mobo, but doesn't sound like a good permanent solution.
-
@
Maximumbeans:
Man, that's beyond my brain I'm no good with hardware for now. I'd like to get into hardmods in future though -
@
SylverReZ:
@Maximumbeans, Maybe start practice soldering. Get a cheap-ass soldering iron and follow some good YouTube tutorials.+1
-
@
SylverReZ:
Least my experience has gotten better than over a decade ago. My iron would constantly bump into components and break them.
-
@
Maximumbeans:
Sounds good. I actually did soldering but like 16 years ago for school so uuuuh probably rusty haha
-
@
SylverReZ:
@Maximumbeans, Same here. I did soldering at school from a teacher who I honestly liked since he had plenty of good electronics experience.+1
-
-
-
-
-
@
SylverReZ:
It was like all clear and fancy. Tbf I'm not too experienced with chess, but would like to learn someday.
-
-
-
-
-
-
-
-
-
-
-