Homebrew Ninjhax still stuck at red screen even after boot file is in root

[abhisheksha]

I have a new 3DS XL running on 10.7.0.32-U FW

I have followed all the steps that are mentioned in the ninjhax site. Specifically the started kit is on the root of the SD card and the boot.3dsx file is also on the root. After scanning the correct QR code, the exploit always is stuck at the red screen. It does not proceed after that.

 

[RocketRobz]

Try the 10.6 firmware. The payloads work on 10.7.

 

[Lumince]

If using the 10.6 firm doesnt work, try this!

 

[abhisheksha]

Neither the 10.6 QR code nor the QR code that is supplied in the Zip file is working. It always gets stuck at the RED screen and I am 1000% sure that I have literally extracted the STARTER kit directly onto the root of my microSD card. Nothing else loads after this.

 

[Lumince]

Wipe the save data of cubic ninja and try again. scan the qr code in my zip file and let it install. but make sure to put the boot.3dsx file onto the root of your sd card first and do not rename it. The replace the payload with the one in the zip file and see if it boots. If it doesnt then idk what could possibly the problem. Are you sure your on 10.7? Or maybe its a different region?

 

[abhisheksha]

I used the image you provided and tried the official one as well. On 10.6 and 10.7.0.32-U. I can 100% gurantee that the image is correct and the firmware version is correct. I am using the Sky3DS+ version of the Cubic Ninja.

 

[yacepi15]

I used the image you provided and tried the official one as well. On 10.6 and 10.7.0.32-U. I can 100% gurantee that the image is correct and the firmware version is correct. I am using the Sky3DS+ version of the Cubic Ninja.

Try redownloading the game from another site...

 

[abhisheksha]

Nope, just tried - same issue. :\

 

[Lumince]

That is very odd. Can you show me your sd card? or atleast how you have it set up?
Did you also use the payload i gave out?

Edit- Just to check. hblauncherloader_otherapp_payload_NEW-10-7-0-32-USA.bin and boot.3dsx are on the root and you have the 3ds folder on the sd card as well? Just gotta figure out what is wrong with it. It could be 1 tiny thing that we dont see.

 

[abhisheksha]

Here's a video of the issue https://sendvid.com/290l5nd7

Photos here - <IMG>http://tinypic.com/r/28aqqyv/9</IMG>
<IMG>http://tinypic.com/view.php?pic=jij3ih&s=9</IMG>
<IMG>http://tinypic.com/view.php?pic=2ed2w7p&s=9</IMG>

This is the official payload from ninjhax, I tried the one you provided too; same issue

 

[Lumince]

Here's a video of the issue https://sendvid.com/290l5nd7

Photos here - <IMG>http://tinypic.com/r/28aqqyv/9</IMG>
<IMG>http://tinypic.com/view.php?pic=jij3ih&s=9</IMG>
<IMG>http://tinypic.com/view.php?pic=2ed2w7p&s=9</IMG>

This is the official payload from ninjhax, I tried the one you provided too; same issue

Wait wait, is that your sky3ds's sd card?
If its your sky3ds sd card. The 3ds cant load the boot.3dsx from that. It has to be on your 3ds sd card

 

[abhisheksha]

DAMN YOU WERE RIGHT, I WAS TRYING TO DO IT ON THE SKY3DS SD CARD. I DID IT ON THE SD CARD ON THE 3DS and IT WORKED. THANKS A TON!!!!!!!!!!!!!!

 

[Lumince]

DAMN YOU WERE RIGHT, I WAS TRYING TO DO IT ON THE SKY3DS SD CARD. I DID IT ON THE SD CARD ON THE 3DS and IT WORKED. THANKS A TON!!!!!!!!!!!!!!

Haha, i saw the games and i was like uhhh thatmight be the wrong place xD

 

[JRHYLE]

I'm sorry, I'm a newbie and couldn't get to understand what it meant by "I DID IT ON THE SD CARD ON THE 3DS and IT WORKED." How do I do that? I have the same problem, stuck on red screen. I have the sky3ds+ with its SD card in place. Where should I place the boot.3dsx?

 

[Lumince]

I'm sorry, I'm a newbie and couldn't get to understand what it meant by "I DID IT ON THE SD CARD ON THE 3DS and IT WORKED." How do I do that? I have the same problem, stuck on red screen. I have the sky3ds+ with its SD card in place. Where should I place the boot.3dsx?

Put it on your 3ds's sd card. it cant load files from the sky3ds. The sky3ds only loads .3ds files, the boot.3dsx should be on the root of your 3ds's sd card

 

[JRHYLE]

Oh, I understand now. Thanks! I didn't even realize that the 3DS has an actual physical Micro SD card slot and it involves opening the back of the console (duh). Thanks for your response!

 

[Lumince]

Oh, I understand now. Thanks! I didn't even realize that the 3DS has an actual physical Micro SD card slot and it involves opening the back of the console (duh). Thanks for your response!

Yw

 

[Quantumcat]

This is hilarious!!!!!! (Not making fun, just actually funny)

Didn't you wonder where people with real Cubic Ninja cartridges were going to put their files? :-p

 

[Ricken]

Wait wait, is that your sky3ds's sd card?
If its your sky3ds sd card. The 3ds cant load the boot.3dsx from that. It has to be on your 3ds sd card

DAMN YOU WERE RIGHT, I WAS TRYING TO DO IT ON THE SKY3DS SD CARD. I DID IT ON THE SD CARD ON THE 3DS and IT WORKED. THANKS A TON!!!!!!!!!!!!!!

This made my day

 

[Lumince]

This made my day

haha yea ikr xD but people sometimes don't know these things so thats why this forum exists.