Hacking 9.2 N3DS XL: Failed to install CIA in synand

[Ichigo1000]

What is causing the problem? I haven't set up emunand yet and am trying to install fbi cia onto sysnand sd card destination. I have set up RXtools 3.0 beta 2.

This is the steps I took.
1. Turn on 3DS
2. Boot into ninjhax homebrew
3. Launch rxtools via homebrew
4. Launch ninjhax again
5. Launched FBI
6. Attempted to install fbi.cia, resulted in "failed to install"

I have tried the following:
-Resetup rxtools
-Rebuilt my database with dbs files
-Tried to install another cia (homebrew launcher.cia), also failed.
-Made sure the destination was the SD card

 

[Deleted User]

There should be additional failure info than "failed to install"

If you're working with sysNAND. Just use Pasta to guarantee you're in a patched sysnand.

1. Turn on 3DS
2. Boot nHax
3. select Pasta
4. System boots to patched sysNAND.
5. Boot nHax
6. Boot FBI
7. Install CIA.

If that fails you have something else going on.

 

[Myth]

What is causing the problem? I haven't set up emunand yet and am trying to install fbi cia onto sysnand sd card destination. I have set up RXtools 3.0 beta 2.

This is the steps I took.
1. Turn on 3DS
2. Boot into ninjhax homebrew
3. Launch rxtools via homebrew
4. Launch ninjhax again
5. Launched FBI
6. Attempted to install fbi.cia, resulted in "failed to install"

I have tried the following:
-Resetup rxtools
-Rebuilt my database with dbs files
-Tried to install another cia (homebrew launcher.cia), also failed.
-Made sure the destination was the SD card

If you downgrade your mset you can use pasta through that as well.

 

[Ichigo1000]

There should be additional failure info than "failed to install"

If you're working with sysNAND. Just use Pasta to guarantee you're in a patched sysnand.

1. Turn on 3DS
2. Boot nHax
3. select Pasta
4. System boots to patched sysNAND.
5. Boot nHax
6. Boot FBI
7. Install CIA.

If that fails you have something else going on.

Install Failed!
FBI.cia
Source: SOURCE_AM_START_CIA_INSTALL (0X13)
Module: MODULE_NM_OS (0X6)
Level: LEVEL_PERMANENT (0X1b)
Summary: SUMMARY_WRONG_ARGUEMENT (0X8)
Description: DESCRIPTION_INVALID_COMMAND (0X2f)
Press Start to continue.

I boot into rxtools. Do I need pasta to install cias on sysnand? Rxtools does not work?

 

[Deleted User]

I'm confused, are you using RX-Pasta Mode or RX-Devmode to boot to sysNAND?

That error generally means there's no hook for 9.2 (usually happens if you're in emunand running FBI as a .3dsx since emunand firmlaunches higher than 9.2)

Either use RXPasta or Pasta to boot into a sig-patched sysNAND and install from there.

 

[Ichigo1000]

you can choose? When i launch rxtools via homebrew, sometimes it gets a black screen, making me have to reboot. When it works, it shows rxtools on the top screen (i assume this is a splash screen or start screen) but the bottom screen is black. If it does show the rx tools screen on the top, i have to press a, which would send me to home menu. Is that normal?

If i remember correctly, i remember rxtools has a bottom screen for selecting sysnand etc in some tutorials, which i don't have.

 

[Vorpal Blade]

you can choose? When i launch rxtools via homebrew, sometimes it gets a black screen, making me have to reboot. When it works, it shows rxtools on the top screen (i assume this is a splash screen or start screen) but the bottom screen is black. If it does show the rx tools screen on the top, i have to press a, which would send me to home menu. Is that normal?

If i remember correctly, i remember rxtools has a bottom screen for selecting sysnand etc in some tutorials, which i don't have.

Bottom screen occasionally doesn't load. If you do see the top screen but no bottom, just hit "A" then "X" to boot into sysnand.

But anyways, I had the same problem as you - attempted to use Rxtools to install FBI to sysnand. Like the others have said in this thread, use Pasta CFW instead of Rxtools, it's more guaranteed.

 

[Ichigo1000]

Bottom screen occasionally doesn't load. If you do see the top screen but no bottom, just hit "A" then "X" to boot into sysnand.

But anyways, I had the same problem as you - attempted to use Rxtools to install FBI to sysnand. Like the others have said in this thread, use Pasta CFW instead of Rxtools, it's more guaranteed.

Is more like always though, i haven't even once seen how the bottom looked like beside from the o3ds tutorials.

 

[Townsperson]

You have to hold a button when booting rxTools (L, maybe? I don't remember) to get to the menu, which will give you an option to boot SysNand. As others have mentioned, you're booting into emunand.

 

[Ichigo1000]

You have to hold a button when booting rxTools (L, maybe? I don't remember) to get to the menu, which will give you an option to boot SysNand. As others have mentioned, you're booting into emunand.

I don't have emunand setup, is that the problem?

 

[Ichigo1000]

I'm confused, are you using RX-Pasta Mode or RX-Devmode to boot to sysNAND?

That error generally means there's no hook for 9.2 (usually happens if you're in emunand running FBI as a .3dsx since emunand firmlaunches higher than 9.2)

Either use RXPasta or Pasta to boot into a sig-patched sysNAND and install from there.

Okay, seems like I set everything up now, but I set the boot time in ctrmanager to 0. If I want to use a different cfw, how do I get back into ctrbootmanager?

 

[BothyBhoy]

What is causing the problem? I haven't set up emunand yet and am trying to install fbi cia onto sysnand sd card destination. I have set up RXtools 3.0 beta 2.

This is the steps I took.
1. Turn on 3DS
2. Boot into ninjhax homebrew
3. Launch rxtools via homebrew
4. Launch ninjhax again
5. Launched FBI
6. Attempted to install fbi.cia, resulted in "failed to install"

I have tried the following:
-Resetup rxtools
-Rebuilt my database with dbs files
-Tried to install another cia (homebrew launcher.cia), also failed.
-Made sure the destination was the SD card

Rxtools must be in DEVMODE remember to install FBI onto sysnand.....

--------------------- MERGED ---------------------------

And you hold down "L" to access rxtools options menu....