Homebrew "Bricked" 2DS by resetting console after MSET downgrade, trying to save it

StefanDesu

Member
OP
Newcomer
Joined
Feb 10, 2016
Messages
16
Trophies
0
Age
33
XP
60
Country
Gambia, The
Hi,

a long time ago (at least so long that I totally forgot what I was doing back then) I downgraded the MSET of my roommate's 2DS to be able to launch the gateway menu and boot into emuNAND.

A few days ago, she asked me if we could reset her console because she hadn't used it in a while and wanted to start fresh. I thought that nothing could go wrong with resetting the console if I still have the SD card. Of course I was wrong. Now, when I want to boot the console, the setup wants me to slide the 3D slider to max. So I'm stuck at that point.

Since you can still boot directly into a game, a friend sent me his copy of Cubic Ninja and our plan was to boot into the Gateway Menu and restore her NAND backup (which we have, fortunately). But neither the Gateway exploit thing works (restarts the console), nor ninjhax. ninjhax actually shows me the menu which asks me if I really want to install the exploit, but then gets stuck at 70%. I'm pretty sure the sysNAND is 8.1.0-18E or 8.1.0-19E, but both get stuck at 70%. I also tried some other firmware versions, still the same.

So here's my question: Is it possible to get this working? Am I doing something inherently wrong? Or do I really have to hard mod this thing to reflash the NAND? I'm not sure I'm trusting my soldering skills enough to not mess up the motherboard.

Thanks in advance!
 
  • Like
Reactions: schrmh and Maschell

SANNIC789

Well-Known Member
Member
Joined
Oct 3, 2015
Messages
704
Trophies
0
XP
179
Country
United States
use cubic ninja then give it hacks 2.5 and load decript 9 WIP or emunand 9 to restore the nand.dat i wode use (decript 9 WIP)
 
D

Deleted User

Guest
Didn't you make a nand back-up before hand? Just install the back-up into the 2ds with a hardmod.
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
use cubic ninja then give it hacks 2.5 and load decript 9 WIP or emunand 9 to restore the nand.dat i wode use (decript 9 WIP)
I'm pretty sure 2.5 requires sysNAND 9.0 or higher.

You could try OoTHax as well if you have a copy of that game. If you don't, buy a copy from a game shop with a generous return policy, use it to do what you need to do and return it within the time limit for no questions returns. I can't explain why Ninjhax doesn't work, maybe the console doesn't have access to the browser when it isn't set up yet? In any case, OoTHax doesn't need a browser, just need another 3DS with homebrew ability in order to load the exploit onto it.
 

StefanDesu

Member
OP
Newcomer
Joined
Feb 10, 2016
Messages
16
Trophies
0
Age
33
XP
60
Country
Gambia, The
use cubic ninja then give it hacks 2.5 and load decript 9 WIP or emunand 9 to restore the nand.dat i wode use (decript 9 WIP)
As I said, the exploit won't install because it gets stuck at 70%. I'm not sure why this happens.

Didn't you make a nand back-up before hand? Just install the back-up into the 2ds with a hardmod.
I would like to prefer not to hard mod the console because it's not mine and I don't want to completely destroy it. If nothing else works, I will resort to a hard mod...

Edit:
I'm pretty sure 2.5 requires sysNAND 9.0 or higher.

You could try OoTHax as well if you have a copy of that game. If you don't, buy a copy from a game shop with a generous return policy, use it to do what you need to do and return it within the time limit for no questions returns. I can't explain why Ninjhax doesn't work, maybe the console doesn't have access to the browser when it isn't set up yet? In any case, OoTHax doesn't need a browser, just need another 3DS with homebrew ability in order to load the exploit onto it.
This sounds like a good option. I don't have OoT, but buying it and then returning it should be possible (there's a 14 day return policy here in Germany). I do have another 3DS with homebrew ability.
 
Last edited by StefanDesu,

StefanDesu

Member
OP
Newcomer
Joined
Feb 10, 2016
Messages
16
Trophies
0
Age
33
XP
60
Country
Gambia, The
Ah... I'm slightly confused at this ;p
No big deal, my post might be a bit confusing...

Just another thing that I just thought of: Do I maybe need the QR code for some specific 4.5 firmware because I've downgraded the MSET to 4.5? I think I tried 4.5.0-7E, but it didn't work.
 

iAqua

Member
Joined
Dec 7, 2015
Messages
2,848
Trophies
1
Location
XP
2,476
Country
United Kingdom
No big deal, my post might be a bit confusing...

Just another thing that I just thought of: Do I maybe need the QR code for some specific 4.5 firmware because I've downgraded the MSET to 4.5? I think I tried 4.5.0-7E, but it didn't work.
I doubt it since you didn't downgrade native firm.
 

daxtsu

Well-Known Member
Member
Joined
Jun 9, 2007
Messages
5,627
Trophies
2
XP
5,194
Country
Antarctica
I'm pretty sure 2.5 requires sysNAND 9.0 or higher.

You could try OoTHax as well if you have a copy of that game. If you don't, buy a copy from a game shop with a generous return policy, use it to do what you need to do and return it within the time limit for no questions returns. I can't explain why Ninjhax doesn't work, maybe the console doesn't have access to the browser when it isn't set up yet? In any case, OoTHax doesn't need a browser, just need another 3DS with homebrew ability in order to load the exploit onto it.

I'm not sure if OoTHax is an option either, Ninjhax 1.1b was never ported to it, and as you said hax 2.x requires 9.0 or higher.
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
I'm not sure if OoTHax is an option either, Ninjhax 1.1b was never ported to it, and as you said hax 2.x requires 9.0 or higher.
Oh, darn. Didn't realise that. Hopefully someone can work out why Ninjhax won't work!

Edit: How do you run Cubic Ninja without the system being set up? I will experiment tomorrow with some o3DS' that I have that have less than 9.0 firmware and see what happens (since I know for sure what their firmwares are, I can eliminate unsuccessful guesses of OPs firmware being a cause of the problem)
 
Last edited by Quantumcat,

StefanDesu

Member
OP
Newcomer
Joined
Feb 10, 2016
Messages
16
Trophies
0
Age
33
XP
60
Country
Gambia, The
Edit: How do you run Cubic Ninja without the system being set up? I will experiment tomorrow with some o3DS' that I have that have less than 9.0 firmware and see what happens (since I know for sure what their firmwares are, I can eliminate unsuccessful guesses of OPs firmware being a cause of the problem)
Hold A+B+X+Y+R and turn on the system, it boots directly into the cartridge. Thanks for your effort!

Edit: By the way, another error source that a friend has suggested was the internet connection. I could boot into recovery (L+R+A+Up I think) and it asked me to configure the wifi to be able to update the system. The system update itself fails, but it shows an internet connection in the top left so I think it should work. Or do you think this might be the problem? Getting stuck at 70% while installing the exploit usually means that the QR code is not the correct one though.
 
Last edited by StefanDesu,
  • Like
Reactions: Quantumcat

sarkwalvein

There's hope for a Xenosaga port.
Member
Joined
Jun 29, 2007
Messages
8,506
Trophies
2
Age
41
Location
Niedersachsen
XP
11,219
Country
Germany
Hold A+B+X+Y+R and turn on the system, it boots directly into the cartridge. Thanks for your effort!
Just in case you need to get some particular game, remember many public libraries also have videogames in Germany. (at least in Braunschweig)
So you could just borrow the game from the library.
 
  • Like
Reactions: Quantumcat

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Veho @ Veho: Apply snorgle to pinfor.