Hacking Luma3DS - Noob-proof 3DS Custom Firmware

[Matsumot0]

Upper and equal

 

[daxtsu]

Sorry if I ask, do I need a 7.X+ O3DS? My sysnand is 9.2. I have a hard time understanding ">=" parts

>= means greater than or equal to, so yes, your 3DS is fine (because 9.2 is greater than, but not equal to, 7.x).

 

[Aurora Wright]

Sorry if I ask, do I need a 7.X+ O3DS? My sysnand is 9.2. I have a hard time understanding ">=" parts

It means that your O3DS must be *at least* on 7.x. This is just because it doesn't support loading the 7.x key from SD card.

 

[linuxares]

It means that your O3DS must be *at least* on 7.x. This is just because it doesn't support loading the 7.x key from SD card.

Thank you, sorry for being dumb. Math was never my strong suit

Gonna try this tomorrow. Thank you for your work and thank you Rei for her development of the original.

 

[Matsumot0]

@Aurora Wright So it's works with NATIV_FIRM 10.4 for O3DS too, it's nice but with only the decrypted one?
I've found only the encrypted 10.4 file on Nintendo serv and it doesn't works :s

Maybe you know how to decrypt it maybe?

Edit: Ah 10.2 max on O3DS, 10.4 is only for N3DS x)
that's why lol

 

[daxtsu]

@Aurora Wright So it's works with NATIV_FIRM 10.4 for O3DS too, it's nice but with only the decrypted one?
I've found only the encrypted 10.4 file on Nintendo serv and it doesn't works :s

Maybe you know how to decrypt it maybe?

Edit: Ah 10.2 max on O3DS, 10.4 is only for N3DS x)
that's why lol

If you know how to compile homebrew, you can use Cakes to decrypt it, by editing its source code slightly so that it'll dump the firmware as "unsupported" instead of trying to boot it.

 

[Svaethier]

I made a new version. I added (very basic) checks to make ReiNand halt when using an encrypted (Cakes ones) firmware.bin, or a N3DS firmware on an O3DS and vice-versa, and then I re-added the splash screen (it shows for longer than the brief flash of the official build, and boot isn't delayed at all if the rei/splash.bin isn't on the SD card).
Also, the 10.4 FIRM is now used for N3DS (thanks Cakes!), so you need to get it from the "iso site"

I have the new version all set up and a splash.bin file at root but no splash screen upon boot

 

[Supster131]

I have the new version all set up and a splash.bin file at root but no splash screen upon boot

splash.bin should be placed within the "rei" folder, and not on the root of your sd card.

 

[Svaethier]

splash.bin should be placed within the "rei" folder, and not on the root of your sd card.

Ok thanks,it works =D

 

[robertorpg94]

reinand suport emunand on N3ds 10.4 ?

 

[RocketRobz]

reinand suport emunand on N3ds 10.4 ?

emuNAND supports up to 10.4. You will still need <= 9.2 to boot it.

 

[Supster131]

reinand suport emunand on N3ds 10.4 ?

Yes, both this mod and the original ReiNAND support the N3DS up to 10.4.

 

[robertorpg94]

I do direct update the console using the emunand ?

 

[Supster131]

I do direct update the console using the emunand ?

Only update through your system settings! Not via anywhere else.

 

[robertorpg94]

I use reinand 2.1 , how could update it to 3.0 ? only exchanging files ?

 

[Supster131]

I use reinand 2.1 , how could update it to 3.0 ? only exchanging files ?

Yeah, you can download either the official version or this mod. Drag the new files onto your sd card and let them overwrite. You'll also need to update the firmware.bin file.

Also, the latest version is 3.1.

 

[robertorpg94]

I did not found the fimware.bin file, I download it from somewhere else ?

 

[Supster131]

I did not found the fimware.bin file, I download it from somewhere else ?

Since you still haven't stated if you chose this over the official one, I'll help you out on both.

Mod: Go to that iso site, CFW Discussion, and look for the thread made by Aurora. Download the firmware.bin file from there (make sure to use the correct one, depending if you're on a o3DS or n3DS).
Original: Go to Rei's Github. You should be able to find the firmware.bin there.

 

[xXDungeon_CrawlerXx]

Hey, could you add support for more than one EmuNAND?
I've one european and one japanese EmuNAND on my SD Card and want to select which EmuNAND I want to boot.
Would this be possible?

 

[robertorpg94]

now I changed to fimware.bin

by the way back to normal functioning , I can update my emunand of 9.5 to 10.4 by the system settings without fear ?