Hacking say I want to do a NAND mod....

[Piluvr]

How could I do a nand hardmod, but instead of sd, I use usb?

 

[Mazamin]

I think that the sd is the most closest thing with emmc that has the 3DS, but you can also use an sd to usb adapter

 

[Piluvr]

I think that the sd is the most closest thing with emmc that has the 3DS, but you can also use an sd to usb adapter

ok, thanks

 

[usernametaken]

How could I do a nand hardmod, but instead of sd, I use usb?

Just so you know, if you were to plug your nand directly into usb, instead of using a SD > SD reader as a buffer it'll fry your Nand.

 

[Piluvr]

Just so you know, if you were to plug your nand directly into usb, instead of using a SD > SD reader as a buffer it'll fry your Nand.

good to know!

 

[dark_samus3]

good to know!

I did see a post where someone put the SD reader into the 3DS and then used a USB plug on the other end, they had to put a few switches in though to make it so that it didn't constantly bluescreen on boot

 

[usernametaken]

I did see a post where someone put the SD reader into the 3DS and then used a USB plug on the other end, they had to put a few switches in though to make it so that it didn't constantly bluescreen on boot

https://gbatemp.net/threads/3ds-xl-nand-access-via-usb-mod.363245/

 

[Piluvr]

I know.

 

[gudenau]

I would build in a msd adapter with a multiple pull, sigle through switch to disconnect it from the 3ds nand. The put a mini usb connector on it.

 

[hundshamer]

Seriously, you're going to want a dpst smd switch and use it on the CLK and CMD lines. DAT0 and GND are fine.

 

[usernametaken]

Seriously, you're going to want a dpst smd switch and use it on the CLK and CMD lines. DAT0 and GND are fine.

Doing a usb hardmod is more trouble than it's really worth.. Isn't it?

Just linked to the guide since it was mentioned.