Hardware Cannot display the software on the SD Card. The SD Card could not be accessed.

Kane49

Well-Known Member
OP
Member
Joined
Nov 4, 2013
Messages
446
Trophies
0
Age
36
XP
343
Country
Gambia, The
Has anyone ever managed to fix this error before ?
All the solutions i could find online expected faulty sd cards, but when i put mine into another 3ds it works perfectly.
 

ground

Well-Known Member
Member
Joined
Mar 22, 2007
Messages
907
Trophies
0
XP
572
Country
Netherlands
did you ever open up the 3ds? if so look if it the reader is correctly plugged into the motherboard. i had the same error yesterday and i made this fault too.
 

ground

Well-Known Member
Member
Joined
Mar 22, 2007
Messages
907
Trophies
0
XP
572
Country
Netherlands
i think you have an 3ds xl (which i dont). but is there a connector on the other side of the bosrd?or is itsolderen directly? and may i ask what you did when you opened it?
 

Kane49

Well-Known Member
OP
Member
Joined
Nov 4, 2013
Messages
446
Trophies
0
Age
36
XP
343
Country
Gambia, The
i think you have an 3ds xl (which i dont). but is there a connector on the other side of the bosrd?or is itsolderen directly? and may i ask what you did when you opened it?

I soldered something to the nand pinouts, never getting near the left side of the board though :)
(It didnt work before i did anything to it as well but i figured it was a fluke, i only buy cheap used ones from flea markets=

I will try and solder the sd card directly to the connectors !
 

Kane49

Well-Known Member
OP
Member
Joined
Nov 4, 2013
Messages
446
Trophies
0
Age
36
XP
343
Country
Gambia, The
After removing the sd card slot from the board the multimeter(and me soldering a card directly to the pins) says: one of the pins is not conducting !
Directly soldering should fix that!
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Maximumbeans @ Maximumbeans: butte