Hacking R4i RTS 3DS 6.3.0-12 Fail to boot

[Roswell_r]

I have a R4i RTS 3DS (www.r4ids.cn) which has now the 6.2.0 update from said website.

The 3DS itself is a large one with 6.3.0-12 on it.

According to the said website the 6.2.0 update should work on the 6.3.0 fw but it doesn't. It just goes straight to black screen with 'please power off' etc...

Any ideas?

Yes I've updated to 6.2.0 for the flashcart.
Yes I've updated to the latest kernel 1.62.

Thanks.

 

[Pong20302000]

you difinately applied the 6.2.0 patch by running it before you updated the console and didnt just copy it to the MicroSD without running it?

 

[Roswell_r]

The console was first updated to 6.3.0-12 and then the 6.2.0 patch was copied to SD card and run on another 3DS which was running 4.4. So the card definately got updated to 6.2.0.

The card was then tested in the 6.3.0-12 and produces the power off error.

 

[Pong20302000]

The console was first updated to 6.3.0-12 and then the 6.2.0 patch was copied to SD card and run on another 3DS which was running 4.4. So the card definately got updated to 6.2.0.

The card was then tested in the 6.3.0-12 and produces the power off error.

coping the R4ids.cn Gold Patch to the SD card doesnt update the Flashcard

the update need to be copied to the MicroSD thats in the flashcard and then turned on and run the .nds update file before you update the console

 

[Roswell_r]

Typo, I meant to write Micro SD.

Already as stated 'and run on another 3DS' meaning, I ran the 6.2.0 update for the flashcart already. The fw was upgraded.

 

[Pong20302000]

Typo, I meant to write Micro SD.

Already as stated 'and run on another 3DS' meaning, I ran the 6.2.0 update for the flashcart already. The fw was upgraded.

you have cut the line on the flashcard right?

 

[Roswell_r]

What are you referring to?

 

[Pong20302000]

for R4ids.cn for 6.1.0 firmware and higher

 

[Roswell_r]

Do you have a link for this, preferrably official link?

 

[Pong20302000]

download the 6.1.0 patch and you will find a document containing these images

but its not like you cant trust the person that does the flashcard compatibility list for the interent

 

[VMM]

Do you have a link for this, preferrably official link?

These images are avaiable in the update file of v6.0 on the official site.
You'll have to open the catridge and cut the signal line between C1 and R9.
I already have done it a couple of months, to say the truth I sawed the line, it's working like a charm.

 

[Roswell_r]

Thanks, if you're referring to yourself Pong, soory I don't know who you are.

I just needed somewhere official to refer to my friend. If they're in the update for 6.0 or 6.1 i'll look. Just wanted to know where you got the images from.

Sounds like this will be the solution.

Thanks everybody.