Hacking Possible fix for USB loaders and new Motion+ controllers

[JoostinOnline]

does this wiigsc work with neogamma, it doesnt seem to provide the option :-(

No. Why do you use NeoGamma anyway? It's a great disc loader, but it lacks a lot in terms of USB loading. It doesn't even support FAT32. I suggest you take a look at Configurable USB Loader.

 

[JoostinOnline]

I have one of the new remotes and it doesnt work in the hombrew channel nor any usb loader but i got around it by using a regular wii remote to get into the hombrew channel and usb loader once i load a game i just turn the regular remote off then turn the newer remote plus on and it works fine ..... in games likes skyward sword the regular remote will turn off by itself then all u have to do is turn your newer remote plus on

If you have extra remotes at your disposal, then that method works fine.

 

[RiderLeangle]

Does this fix work for games burned to a disk? I wanted to play Skyward Sword, went out and bought a WiimotePlus (Wanted to buy a normal MotionPlus but best buy had none and gamestop only had 3, all blue WiimotePlus) and it doesn't want to sync with the homebrew channel or the latest NeoGamma which I made into a channel just to try to work this out. :/

EDIT: Fuck, didn't even notice the "USB" thing in the title... I just followed this link from another topic about these controllers...

 

[JoostinOnline]

Does this fix work for games burned to a disk? I wanted to play Skyward Sword, went out and bought a WiimotePlus (Wanted to buy a normal MotionPlus but best buy had none and gamestop only had 3, all blue WiimotePlus) and it doesn't want to sync with the homebrew channel or the latest NeoGamma which I made into a channel just to try to work this out. :/

EDIT: Fuck, didn't even notice the "USB" thing in the title... I just followed this link from another topic about these controllers...

You could launch the game with a working controller, then switch to the Motion+ controller in-game. If you don't have a working controller, then you could install DarkCorp or an auto-loader channel.

 

[RiderLeangle]

Does this fix work for games burned to a disk? I wanted to play Skyward Sword, went out and bought a WiimotePlus (Wanted to buy a normal MotionPlus but best buy had none and gamestop only had 3, all blue WiimotePlus) and it doesn't want to sync with the homebrew channel or the latest NeoGamma which I made into a channel just to try to work this out. :/

EDIT: Fuck, didn't even notice the "USB" thing in the title... I just followed this link from another topic about these controllers...

You could launch the game with a working controller, then switch to the Motion+ controller in-game. If you don't have a working controller, then you could install DarkCorp or an auto-loader channel.

I launched the game with the regular Wiimote but even after the game was loaded, the WiimotePlus wasn't connecting :/

 

[Devante]

Works fine with my official black Wii Remote+ that came with FlingSmash (hey, it was $8!) that I bought last week.

 

[RiderLeangle]

Works fine with my official black Wii Remote+ that came with FlingSmash (hey, it was $8!) that I bought last week.

From what I've heard it seems to be an issue with the blue and pink ones purchased within the past couple of days

 

[JoostinOnline]

Does this fix work for games burned to a disk? I wanted to play Skyward Sword, went out and bought a WiimotePlus (Wanted to buy a normal MotionPlus but best buy had none and gamestop only had 3, all blue WiimotePlus) and it doesn't want to sync with the homebrew channel or the latest NeoGamma which I made into a channel just to try to work this out. :/

EDIT: Fuck, didn't even notice the "USB" thing in the title... I just followed this link from another topic about these controllers...

You could launch the game with a working controller, then switch to the Motion+ controller in-game. If you don't have a working controller, then you could install DarkCorp or an auto-loader channel.

I launched the game with the regular Wiimote but even after the game was loaded, the WiimotePlus wasn't connecting :/

Press HOME and do the disconnect/resync option so that the Motion+ remote is first.

Works fine with my official black Wii Remote+ that came with FlingSmash (hey, it was $8!) that I bought last week.

How is that in anyway helpful? It's common knowledge that most work, it's only the most recent models that don't.

 

[RiderLeangle]

Does this fix work for games burned to a disk? I wanted to play Skyward Sword, went out and bought a WiimotePlus (Wanted to buy a normal MotionPlus but best buy had none and gamestop only had 3, all blue WiimotePlus) and it doesn't want to sync with the homebrew channel or the latest NeoGamma which I made into a channel just to try to work this out. :/

EDIT: Fuck, didn't even notice the "USB" thing in the title... I just followed this link from another topic about these controllers...

You could launch the game with a working controller, then switch to the Motion+ controller in-game. If you don't have a working controller, then you could install DarkCorp or an auto-loader channel.

I launched the game with the regular Wiimote but even after the game was loaded, the WiimotePlus wasn't connecting :/

Press HOME and do the disconnect/resync option so that the Motion+ remote is first.

Oh, I was still talking about the neogamma channel thing. I'm guessing I just have to pray that 8gb usb stick works. Mind telling me what USB loaders are good?

 

[Lucif3r]

cfg usb loader, usb loader gx and wiiflow, pick whichever you like best.

 

[RiderLeangle]

Haha, it works, thanks, now I'm off to play Skyward Sword

 

[KTroopA]

Can anyone advise on how to use this program to create working channels for wiiflow? I tried several times and all i get is a black screen when I click the channel. I think I am meant to replace the wiiflow forwarder with a latest version in the loaders folder, but not sure. Can someone help plz?

 

[FIX94]

Can anyone advise on how to use this program to create working channels for wiiflow? I tried several times and all i get is a black screen when I click the channel. I think I am meant to replace the wiiflow forwarder with a latest version in the loaders folder, but not sure. Can someone help plz?

You can't use the current wiiflow version for it afaik. Just use cfg-loader for the job.

 

[nobody_tw]

Hi, JoostinOnline

The new libogc_DevkitPPC_24_R4884 can fix the HBC ap with this new motion+ problem.

Is that true?


Thanks!!


nobody_tw

 

[FIX94]

Have you seen the age of this thread? But yes it can.

 

[JoostinOnline]

There was an update to the HBC a few hours ago that supports the new remotes!

 

[jurai]

There was an update to the HBC a few hours ago that supports the new remotes!

Oh nice! Was just asking about this the other day.

also FYI, CFG loader has a Mod branch focusing on Dios Mios Lite support which is also now updated for the new motion+ controllers

 

[misteromar]

How the hell did Nintendo do this?

 

[tueidj]

Nintendo didn't really do anything. If you read marcan's hackmii.com blog post it explains how the wiiuse library has always been talking to the wiimotes "wrong" but nobody noticed because just by chance, it happened to work.

 

[Kadin]

Just a word of warning to anyone trying to install a channel for the recent release of Mario Party 9 via WiiGSC - it won't work. I just spent an hour trying to isolate why my Wii was booting to a black screen after I did a batch channel creation due to a new black Wiimote+. I finally isolated that MP9 was the culprit. Luckily Priiloader was there to save me.