2018-01-02 01:09:11
Cafe OS SDK Version 2.13.01 Build 68939 Branch sdk_2_13
Espresso:       0x0000700100000201
Latte:          0x0000409f
System mode:    0x100000
Boot flags:     0x2000
Security Level: 0x1e
Key Type:       0xfffffffc
Prod Version:   0x5
Serial:         702985384
Model:          WUP-101(02)
Prod Area:      0x2
Game Area:      0x2
5GHz Code:      0x7
BOOT1:          0x20b9
DRH:            0x190c
BT:             0x205
+0x000500301001110a:0x00000064
+0x000500301001010a:0x000000c5
+0x0005001010040100:0x000000d5





----------- Starting System Log -----------
00:00:00:247: AHCI_DRV Trace: Initiating warm open.
00:00:00:247: AHCI_DRV Trace: link ready, speed is GEN 1.
00:00:00:247: AHCI_DRV Trace: device ready.
00:00:00:248: AHCI_DRV Trace: port operational.
00:00:00:250: TEST Info: crossProcessHeap OK.
00:00:00:252: AUXIL Info: crossProcessHeap OK.
00:00:00:253: AUXIL Info: Net OK.
00:00:00:258: AHCI_DRV Trace: soft reset OK.
00:00:00:298: ODM: ODM: Successfully configured preload cache
00:00:00:380: ISFS: FAT INFO (ch WUP): slot 5 / seq 65095 (Each FAT slot has been updated 1017 times in avr)
00:00:00:380: FSA: [uptime 0.380 s]: Attached volume to slc01 (isfs): Capacity 511 MB, 262016 logical blocks of size 2048 B.
00:00:00:466: ISFS: FAT INFO (ch RVL Compat): slot 15 / seq 61873 (Each FAT slot has been updated 3867 times in avr)
00:00:00:466: FSA: [uptime 0.466 s]: Attached volume to slccmpt01 (isfs): Capacity 511 MB, 261632 logical blocks of size 2048 B.
00:00:00:471: SCFM:Start init. BUILD_TIME:[19:23:46]
00:00:00:474: SCFM:FSAInit
00:00:00:474: SCFM:AddClient
00:00:00:475: SCFM:scfmMountSlc
00:00:00:475: SCFM:scfmLoad
00:00:00:475: SCFM:Done init.
00:00:00:476: PCFS: Disabled because we are in PROD mode.
00:00:00:476: MCP: booting from NAND
00:00:00:476: MCP: Boot PM flags - PON_RESTART 
00:00:00:494: MCP: Cafe OS SDK Version 2.13.01 Build 68939 Branch sdk_2_13
00:00:00:494: MCP: Booting on Espresso (0x0000700100000201), Latte (0x25100028), RTC (0x01)
00:00:00:495: MCP: Platform - boardType(CF), boardRevision(11), devicePresence(0x00000000), sataDevice(3), consoleType(1)
00:00:00:497: ISFS: FAT block entries check start
00:00:00:501: ISFS: FAT block entries check finished.
00:00:00:517: FSA: [uptime 0.517 s]: Attached volume to mlc01 (wfs): Capacity 29760 MB, 60948480 logical blocks of size 512 B.
00:00:00:521: FSA: [uptime 0.521 s]: Attached volume to ramdisk01 (wfs): Capacity 127 MB, 131070 logical blocks of size 1024 B.
00:00:00:542: FSA: [uptime 0.542 s]: Attached volume to sdcard01 (fat): Capacity 60906 MB, 124735488 logical blocks of size 512 B.
00:00:00:586: ISFS: FAT block entries check start
00:00:00:589: ISFS: FAT block entries check finished.
00:00:00:714: MCP: File loading from ramdisk cache is enabled
00:00:00:721: MCP: Master title 0005001010040100 os 000500101000400a from mlc01 flags 0005
00:00:00:744: MCP: os version 10 NDEBUG (0x000500101000400a)
00:00:00:745: MCP: FSA volume on device /dev/mlc01 (wfs) attached @ uptime 0.745 s.
00:00:00:758: MCP: found master title 5001010040100 on mlc01 at 0.758 s
00:00:00:759: MCP: Titles scanned (dev_state 0004) on device /dev/mlc01 (wfs) @ uptime 0.759 s.
00:00:00:761: MCP: FSA volume on device /dev/ramdisk01 (wfs) attached @ uptime 0.761 s.
00:00:00:761: MCP: Titles scanned (dev_state 0006) on device /dev/ramdisk01 (wfs) @ uptime 0.761 s.
00:00:00:762: MCP: FSA volume on device /dev/sdcard01 (fat) attached @ uptime 0.762 s.
00:00:00:762: MCP: Titles scanned (dev_state 0006) on device /dev/sdcard01 (fat) @ uptime 0.762 s.
00:00:00:762: MCP: FSA volume on device /dev/slc01 (isfs) attached @ uptime 0.762 s.
00:00:00:762: MCP: FSA volume on device /dev/slccmpt01 (isfs) attached @ uptime 0.762 s.
00:00:00:763: MCP: Titles scanned (dev_state 0006) on device /dev/slccmpt01 (isfs) @ uptime 0.763 s.
00:00:00:764: MCP: Titles scanned (dev_state 000e) on device /dev/slc01 (isfs) @ uptime 0.764 s.
00:00:00:804: MCP: Titles scanned (dev_state 000c) on device /dev/mlc01 (wfs) @ uptime 0.804 s.
00:00:00:805: MCP: Titles scanned (dev_state 0006) on device /dev/mlc01 (wfs) @ uptime 0.805 s.
00:00:00:920: ISFS: fs_ops.c(3733)Can not change the owner Id of a non-empty file
00:00:00:920: ISFS: fs_ops.c(6719)Could not set attribute, rc=-524312
00:00:01:228: MCP: ECO mode is disabled
00:00:01:229: [+-* DK is ready for console input *-+]
00:00:01:229: MCP: syslog mask is set to 0xffffffff
00:00:01:234: USB Trace: Device hierarchy retrieved from RAMDISK (5).
00:00:01:236: USB Trace: Activating root hubs @ uptime 1.236 s with options 0x100000.
00:00:01:246: UHS0 Trace: DevFsm(EHCI-0/L0/P0): Creating device, speed=HIGH.
00:00:01:247: UHS0 Trace: DevFsm(OHCI-0:0/L0/P0): Creating device, speed=FULL.
00:00:01:248: USB Info: UhsServerAddHc 0 OK.
00:00:01:256: UHS0 Trace: DevFsm(EHCI-1/L0/P0): Creating device, speed=HIGH.
00:00:01:258: UHS0 Trace: DevFsm(OHCI-1:0/L0/P0): Creating device, speed=FULL.
00:00:01:259: USB Info: UhsServerAddHc 1 OK.
00:00:01:266: W2C: Does not need W2C-reflection
00:00:01:273: UHS0 Trace: Powering on root hub group 0.
00:00:01:287: UHS0 Trace: Powering on root hub group 1.
00:00:01:287: UHS0 Trace: DevFsm(EHCI-0/L1/P2): Creating device, speed=HIGH, recovered with address 0x01.
00:00:01:288: UHS0 Trace: DevFsm: There are now a total of 1 connected devices.
00:00:01:304: UHS0 Trace: CltIfFsm(V1058|P0827|IF0): Device EHCI-0/L1/P2/A01 entering probing state @ uptime 1.304 s.
00:00:01:524: UHS1 Trace: DevFsm(EHCI-2/L0/P0): Creating device, speed=HIGH.
00:00:01:526: UHS1 Trace: DevFsm(OHCI-2:0/L0/P0): Creating device, speed=FULL.
00:00:01:526: CCR_MAIN: activating root hub.
00:00:01:568: UHS0 Trace: CltIfFsm(V1058|P0827|IF0): Acquired by client in pid 5.
00:00:01:569: UHS0 Trace: CltIfFsm(V1058|P0827|IF0): Enable endpoints 0x00020004.
00:00:01:573: UMS Trace: Dev(0) - IdentifyCapacity: block size 512(0x200), max LBA 3906963455(0xe8df87ff).
00:00:01:575: UMS Trace: Dev(0) - IdentifyMode: medium type code=0x00, write protect=0.
00:00:01:600: FS_MAIN: UMS Server Created.
00:00:01:602: AUXIL Info: resumed.
00:00:01:633: NET: Applied interface MTU (wl0:1400 eth0:1400).
00:00:01:653: FSA: [uptime 1.653 s]: Attached volume to usb01 (wfs): Capacity 1907697 MB, 3906963456 logical blocks of size 512 B.
00:00:01:654: MCP: FSA volume on device /dev/usb01 (wfs) attached @ uptime 1.654 s.
00:00:01:829: UHS1 Trace: DevFsm(EHCI-2/L1/P1): Creating device, speed=HIGH.
00:00:01:830: UHS1 Trace: DevFsm: There are now a total of 1 connected devices.
00:00:01:857: UHS1 Trace: CltIfFsm(V057e|P0341|IF0): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.857 s.
00:00:01:857: UHS1 Trace: CltIfFsm(V057e|P0341|IF1): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.857 s.
00:00:01:858: UHS1 Trace: CltIfFsm(V057e|P0341|IF2): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.858 s.
00:00:01:858: UHS1 Trace: CltIfFsm(V057e|P0341|IF3): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.858 s.
00:00:01:858: UHS1 Trace: CltIfFsm(V057e|P0341|IF4): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.858 s.
00:00:01:858: UHS1 Trace: CltIfFsm(V057e|P0341|IF5): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.858 s.
00:00:01:859: UHS1 Trace: CltIfFsm(V057e|P0341|IF6): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.859 s.
00:00:01:859: UHS1 Trace: CltIfFsm(V057e|P0341|IF7): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.859 s.
00:00:01:859: UHS1 Trace: CltIfFsm(V057e|P0341|IF8): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.859 s.
00:00:01:859: UHS1 Trace: CltIfFsm(V057e|P0341|IF9): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.859 s.
00:00:01:859: UHS1 Trace: CltIfFsm(V057e|P0341|IF10): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.859 s.
00:00:01:860: UHS1 Trace: CltIfFsm(V057e|P0341|IF11): Device EHCI-2/L1/P1/A01 entering probing state @ uptime 1.860 s.
00:00:01:860: UHS1 Trace: CltIfFsm(V057e|P0341|IF0): Acquired by client in pid 6.
00:00:01:860: UHS1 Trace: CltIfFsm(V057e|P0341|IF0): Enable endpoints 0x00080000.
00:00:01:902: __ccr_hid_attach_add_interface: idx 0 ep 3
00:00:01:902: UHS1 Trace: CltIfFsm(V057e|P0341|IF1): Acquired by client in pid 6.
00:00:01:902: UHS1 Trace: CltIfFsm(V057e|P0341|IF1): Enable endpoints 0x00100000.
00:00:01:943: __ccr_hid_attach_add_interface: idx 1 ep 4
00:00:01:944: UHS1 Trace: CltIfFsm(V057e|P0341|IF2): Acquired by client in pid 6.
00:00:01:944: UHS1 Trace: CltIfFsm(V057e|P0341|IF3): Acquired by client in pid 6.
00:00:01:944: UHS1 Trace: CltIfFsm(V057e|P0341|IF3): Activating bAlternateSetting 0.
00:00:01:946: UHS1 Trace: CltIfFsm(V057e|P0341|IF4): Acquired by client in pid 6.
00:00:01:947: UHS1 Trace: CltIfFsm(V057e|P0341|IF5): Acquired by client in pid 6.
00:00:01:947: UHS1 Trace: CltIfFsm(V057e|P0341|IF5): Activating bAlternateSetting 0.
00:00:01:949: UHS1 Trace: CltIfFsm(V057e|P0341|IF7): Acquired by client in pid 6.
00:00:01:950: UHS1 Trace: CltIfFsm(V057e|P0341|IF7): Enable endpoints 0x08001000.
00:00:01:950: UHS1 Trace: CltIfFsm(V057e|P0341|IF8): Acquired by client in pid 6.
00:00:01:951: UHS1 Trace: CltIfFsm(V057e|P0341|IF9): Acquired by client in pid 6.
00:00:01:951: UHS1 Trace: CltIfFsm(V057e|P0341|IF9): Activating bAlternateSetting 0.
00:00:01:954: UHS1 Trace: CltIfFsm(V057e|P0341|IF10): Acquired by client in pid 6.
00:00:01:954: UHS1 Trace: CltIfFsm(V057e|P0341|IF11): Acquired by client in pid 6.
00:00:01:954: UHS1 Trace: CltIfFsm(V057e|P0341|IF11): Activating bAlternateSetting 0.
00:00:01:956: DRH chip revision 00000040
00:00:01:956: DRH firmware version 190c0117
00:00:01:957: DRH cdc version 00080000
00:00:01:957: DRH wifi module id a8e502d0
00:00:01:957: DRH SPL id 00001c58
00:00:02:018: BT: BTA/BTE/STACK now operational 
00:00:02:130: USBETH Trace: Created interface 100.
00:00:02:300: MCP: boot1 version 2.11.09
00;00;01;574: COSREPORT: Set level:1 from syslog level
00;00;01;574: 
----------------------------------------------- BPERF: (0/1575035) PPC Init.
00;00;01;574: Cafe OS SDK Version 2.13.01 Build 68939 Branch sdk_2_13
00;00;01;574: PPC 00:00:02:308: MCP: loaded and parsed 'preload.txt' at '/vol/system/title/00050010/1000400a/code'
00:00:02:325: MCP: Wake 0 signal
00:00:02:331: DRH using runtime generated WLAN data
00:00:02:331: Setting DRH to Normal mode
00:00:02:332: setting DRH system time to 01:09:13
00:00:02:335: sending DRC WOWL wake
00:00:02:336: ccr_admin_wowl_wake_drc() returned -1893541
NDEBUG Kernel Build date - Jul 28 2015 19:55:58
00;00;01;574: BUILT AS OS_VERSION_MAJOR 000500101000800A MINOR 0x3D56
00;00;01;574: core=1 WARM BOOT
00;00;01;574: SOFT INTERRUPT MODE
00;00;01;574: -----------------------------------------------

00;00;01;575: KiCblRegisterBlocks() completed with status 0:-4.
00;00;01;575: PROD Mode - don't even try to load kdebug.elf
00;00;01;575: title id: 5001010040100, app type 90000001
00;00;01;575: 
00;00;01;575: ---------------------------------------
00;00;01;575: OS VERSION ID     0x000500101000400A
00;00;01;575: MASTER TITLE ON   FLASH
00;00;01;575: ---------------------------------------
00;00;01;575: 
00;00;02;225: DIAG:+KiRPLLoaderSetup
00;00;02;225: DIAG:-KiRPLLoaderSetup: before no-return call to KiLoadContext (0xEFE09400) (0x01003FFC)
00:00:02:415: WUD_BCMFWCheck ==> chipname 20702A1 build 517 from SERIAL FLASH
00:00:02:417: BT: BTRM now Active (WUD Operational)
00:00:02:789: MCP: Titles scanned (dev_state 000c) on device /dev/usb01 (wfs) @ uptime 2.789 s.
00:00:02:791: MCP: Titles scanned (dev_state 0006) on device /dev/usb01 (wfs) @ uptime 2.791 s.
00:00:02:858: MCP: Heartbeat Enabled
00;00;02;737: DIAG:+KiProcess_FinishInitAndPreload
00;00;02;737: KiCblRegisterBlocks() completed with status 0:-4.
00;00;02;737: DIAG:-KiProcess_FinishInitAndPreload: before no-return call to KiInitKernelFinish
00;00;02;737: DIAG:+KiInitKernelFinish
00;00;02;738: VVVVVVV----- PPC Kernel Waiting -----VVVVVVV
00;00;02;738: ^^^^^^^----- PPC Kernel Release -----^^^^^^^
00;00;02;738: DIAG:-KiInitKernelFinish: before no-return call to KiProcess_Launch
00;00;02;738: 
--------------------
00;00;02;738: PROCESS  1 STARTING
00;00;02;738: SYSLOG_LEVEL 1: Warnings Enabled
00;00;02;738: UserMode Core & Thread Initialization (3 Cores)
00;00;02;738:   Core 1 Complete, Default Thread 0x100457E0
00;00;02;739:   Core 0 Complete, MSR 0x00005072, Default Thread 0x10045140
00;00;02;741:   Core 2 Complete, MSR 0x00005072, Default Thread 0x10045E80
00;00;02;741: Clearing Process MEM2 Arena...
00;00;02;754: MEM2 Arena clear complete, size 23 MB, 13ms
00;00;02;777: UserMode OS library build date: Jul 28 2015 19:57:03
00;00;02;777: __AppFlags: 0x00000200

00;00;02;778: OSBlockThreadsOnExit default for sdk version 21301
00;00;02;830: OSSetting_SynchronousPrinting DISABLED
00;00;02;869: OSSetting_CrashDumpType 0, MINI dump after crash
00;00;02;902: TCL(1): init DONE
00:00:03:178: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;00;03;057: VPADInit() depricated, no need to call
00;00;03;058: port 0 attached
00;00;03;058: VPAD Init end, BPERF: (0/3179192) Title PID=1
00;00;03;063: ROOT: Read restart value 1
00;00;03;077: ROOT: Read audio relaunch value 1
00;00;03;088: ROOT: OSID 0x000500101000400A
00:00:03:386: NET: Change admin state (2 -> 1)(iface:0 link:2)
00:00:03:387: [WD]>>>> Linkup msg from Net
00:00:03:398: wlc_mlme_join_cmd called with Command 0x3 Length 0x21
00:00:03:402: NET: Change admin state (0 -> 2)(iface:1 link:2)
00:00:03:402: IFNET_ETH: Configuring link adminState to DOWN.
00:00:03:403: NET: Change admin state (1 -> 1)(iface:0 link:3)
00:00:03:509: [WD]>>>> Linkup msg from Net
00:00:03:519: wlc_mlme_join_cmd called with Command 0x3 Length 0x21
00;00;03;403: Info: Calculating warm boot font CRCs on core:0
00;00;03;404: WPAD: Master Init
00;00;03;404: VPADInit() depricated, no need to call
COSREPORT: Using syslog level:1
COSREPORT: Set upid_mask:ffffffffffffffff module_mask:ffffffffffffffff level:1
00;00;03;511: Info: Warm boot processing font CRCs on core:1
00:00:03:707: MCP: PID 14 requested to disable power transitions
00;00;03;587: DIAG:Issued KiPrepareTitleAsync(0x000500301001110A)
00:00:03:944: MCP: loaded and parsed 'preload.txt' at '/vol/storage_mlc01/sys/title/00050030/1001110a/code'
00:00:03:944: MCP: Preparing error.rpx
00:00:03:948: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050030/1001110a/content
00;00;03;827: DIAG:Result PrepareTitle(0x000500301001110A) came back with cosxml(0x000500301001110A)
00;00;03;829: TitleId 0x000500301001110A Version 0x00000064 Built On SDK 21204
00;00;03;864: port 0 detached
00;00;03;905: ------------------PROCESS 1 LOST FOREGROUND--------------------
00;00;03;906: DIAG: PhysAlloc(6, 0x00800000, 0x00000000, 0x00000000, 0x00140000, 0x00000001)
00;00;03;906: DIAG: InitAddrSpace
00;00;03;906: DIAG: Switch(New)
00;00;03;906: DIAG:+Loader(1, 6)
00;00;03;906: DIAG:+KiRPLLoaderSetup
00;00;03;906: DIAG:-KiRPLLoaderSetup: before no-return call to KiLoadContext (0xEFE09400) (0x01003FFC)
00;00;03;906: Title Loc is 0
00:00:04:058: MCP: PID 14 requested to enable power transitions
00;00;03;937: DIAG:-Loader(1, 6)
00;00;03;937: DIAG: SetFG(6)
00;00;03;938: KiCblRegisterBlocks() completed with status 0:-4.
00;00;03;938: ------------------PROCESS 6 GAIN FOREGROUND--------------------
00;00;03;939: SYSLOG_LEVEL 1: Warnings Enabled
00;00;03;939: UserMode Core & Thread Initialization (3 Cores)
00;00;03;939:   Core 1 Complete, Default Thread 0x100457E0
00;00;03;940:   Core 0 Complete, MSR 0x00005072, Default Thread 0x10045140
00;00;03;942:   Core 2 Complete, MSR 0x00005072, Default Thread 0x10045E80
00:00:04:117: MCP: PID 14 requested to disable power transitions
00;00;03;964: UserMode OS library build date: Jul 28 2015 19:57:03
00;00;03;964: __AppFlags: 0x00002200

00;00;03;965: OSBlockThreadsOnExit default for sdk version 21204
00;00;03;995: ------------------PROCESS 6 LOST FOREGROUND--------------------
00;00;03;996: KiCblRegisterBlocks() completed with status 0:-4.
00;00;03;996: ------------------PROCESS 1 GAIN FOREGROUND--------------------
00;00;03;997: DIAG:Issued KiPrepareTitleAsync(0x000500301001010A)
00:00:04:480: MCP: loaded and parsed 'preload.txt' at '/vol/storage_mlc01/sys/title/00050030/1001010a/code'
00:00:04:480: MCP: Preparing hbm.rpx
00:00:04:485: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050030/1001010a/content
00;00;04;365: DIAG:Result PrepareTitle(0x000500301001010A) came back with cosxml(0x000500301001010A)
00;00;04;366: TitleId 0x000500301001010A Version 0x000000C5 Built On SDK 21211
00;00;04;366: ------------------PROCESS 1 LOST FOREGROUND--------------------
00;00;04;367: DIAG: PhysAlloc(5, 0x08000000, 0x00000000, 0x00000000, 0x02000000, 0x00000001)
00;00;04;367: DIAG: InitAddrSpace
00;00;04;367: DIAG: Switch(New)
00;00;04;367: DIAG:+Loader(1, 5)
00;00;04;367: DIAG:+KiRPLLoaderSetup
00;00;04;367: DIAG:-KiRPLLoaderSetup: before no-return call to KiLoadContext (0xEFE09400) (0x01003FFC)
00;00;04;367: Title Loc is 0
00:00:04:601: MCP: PID 14 requested to enable power transitions
00;00;04;481: DIAG:-Loader(1, 5)
00;00;04;481: DIAG: SetFG(5)
00;00;04;481: KiCblRegisterBlocks() completed with status 0:-4.
00;00;04;481: ------------------PROCESS 5 GAIN FOREGROUND--------------------
00;00;04;483: SYSLOG_LEVEL 1: Warnings Enabled
00;00;04;483: UserMode Core & Thread Initialization (3 Cores)
00;00;04;483:   Core 1 Complete, Default Thread 0x100457E0
00;00;04;484:   Core 0 Complete, MSR 0x00005072, Default Thread 0x10045140
00;00;04;485:   Core 2 Complete, MSR 0x00005072, Default Thread 0x10045E80
00;00;04;507: UserMode OS library build date: Jul 28 2015 19:57:03
00;00;04;507: __AppFlags: 0x00000200

00;00;04;508: OSBlockThreadsOnExit default for sdk version 21211
00;00;04;870: SYSAPP: RPL Load
00;00;04;888: OSSetting_SynchronousPrinting DISABLED
00;00;04;893: OSSetting_CrashDumpType 0, MINI dump after crash
00:00:05:049: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;00;04;927: TCL(5): init DONE
00;00;04;928: VPADInit() depricated, no need to call
00;00;04;928: port 0 attached
00;00;04;929: VPAD Init end, BPERF: (0/5049996) Title PID=5
00;00;04;967:    ACP_AutoInit: start
00;00;04;967:    ACP_AutoInit: ACPInitialize complete
00;00;04;968:    ACP_AutoInit: ACPSaveDataInit complete
00;00;04;970:    ACP_AutoInit: ACPNotifyPlayEvent complete
00;00;04;974:    ACP_AutoInit: NDMInitialize complete
00;00;04;974: ACP: initialized
00;00;04;974: [barista-Process] Product {:program=>38956, :message=>43332, :programProj=>39097, :root=>39136, :sead=>37528, :resource=>39136}
00;00;04;974: [barista-Process] Cafe OS SDK Version 2.12.11 Build 66642 Branch 

00;00;05;070: WPAD: Application Init
00:00:05:581: MCP: PID 14 requested to disable power transitions
00;00;05;461: ProcUI: Received Release Foreground message
00;00;05;470: ProcUI: Releasing foreground
00;00;05;545: port 0 detached
00:00:05:707: MCP: PID 14 requested to enable power transitions
00:00:05:707: MCP: PID 14 requested to disable power transitions
00;00;05;586: ------------------PROCESS 5 LOST FOREGROUND--------------------
00;00;05;586: KiCblRegisterBlocks() completed with status 0:-4.
00;00;05;586: ------------------PROCESS 1 GAIN FOREGROUND--------------------
00;00;05;587: 


-----------------------------
ROOT IS STARTING MASTER TITLE
-----------------------------

00;00;05;587: TEST COOKIE: YOSHI-1992-11-21-00-00-00
00;00;05;587: DIAG:Issued KiPrepareTitleAsync(0x0005001010040100)
00:00:05:868: MCP: loaded and parsed 'preload.txt' at '/vol/storage_mlc01/sys/title/00050010/10040100/code'
00:00:05:868: MCP: Preparing men.rpx
00:00:05:879: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050010/10040100/content
00:00:05:880: MCP: Warning title:0x0005001010040100 does not have ramdisk read capability (forcing)
00:00:05:884: MCP: Link title:0x0005001010040100 file:/vol/content/Common/Package/Men.pack to ramdisk:/vol/sys/proc_ram/cache/Men.pack
00:00:05:884: MCP: 0005001010040100 is not a demo title, skip increment demo launch count
00:00:05:885: MCP: Mapping /vol/content to /vol/storage_mlc01/sys/title/00050010/10040100/content
00;00;05;755: DIAG:Result PrepareTitle(0x0005001010040100) came back with cosxml(0x0005001010040100)
00;00;05;765: TitleId 0x0005001010040100 Version 0x000000D5 Built On SDK 21211
00;00;05;766: ------------------PROCESS 1 LOST FOREGROUND--------------------
00;00;05;766: DIAG: PhysAlloc(2, 0x40000000, 0x00000000, 0x00000000, 0x02300000, 0x00000001)
00;00;05;766: DIAG: InitAddrSpace
00;00;05;767: DIAG: Switch(New)
00;00;05;767: DIAG:+Loader(1, 7)
00;00;05;767: DIAG:+KiRPLLoaderSetup
00;00;05;767: DIAG:-KiRPLLoaderSetup: before no-return call to KiLoadContext (0xEFE09400) (0x01003FFC)
00;00;05;767: Title Loc is 0
00:00:06:108: MCP: PID 14 requested to enable power transitions
00;00;05;987: DIAG:-Loader(1, 7)
00;00;05;987: DIAG: SetFG(7)
00;00;05;987: KiCblRegisterBlocks() completed with status 0:-4.
00;00;05;987: ------------------PROCESS 2 GAIN FOREGROUND--------------------
00;00;05;989: SYSLOG_LEVEL 1: Warnings Enabled
00;00;05;989: UserMode Core & Thread Initialization (3 Cores)
00;00;05;989:   Core 1 Complete, Default Thread 0x100457E0
00;00;05;991:   Core 0 Complete, MSR 0x00005072, Default Thread 0x10045140
00;00;05;992:   Core 2 Complete, MSR 0x00005072, Default Thread 0x10045E80
00;00;06;014: UserMode OS library build date: Jul 28 2015 19:57:03
00;00;06;015: __AppFlags: 0x00000200

00;00;06;015: OSBlockThreadsOnExit default for sdk version 21211
00;00;06;359: SYSAPP: RPL Load
00;00;06;359: mic_core0_thread: master init
00:00:06:500: Acquired IP address via DHCP client for interface: wl0
00:00:06:500: IP address : 192.168.1.90
00:00:06:500: Subnet Mask: 255.255.255.0
00:00:06:500: Gateway    : 192.168.1.1
00;00;06;378: OSSetting_SynchronousPrinting DISABLED
00;00;06;383: OSSetting_CrashDumpType 0, MINI dump after crash
00:00:06:539: ccr_hid_input_start: idx 0 controller: 0, ep 3 int req --> 0
00;00;06;417: TCL(2): init DONE
00;00;06;418: VPADInit() depricated, no need to call
00;00;06;418: port 0 attached
00;00;06;419: VPAD Init end, BPERF: (0/6540015) Title PID=2
SPM: SetManualMode
00;00;06;454: mic_drc_attach_cb: ch 0 reason 1 flags 0x00040100
00;00;06;454:    ACP_AutoInit: start
00;00;06;553:    ACP_AutoInit: ACPInitialize complete
00;00;06;553:    ACP_AutoInit: ACPSaveDataInit complete
00;00;06;556:    ACP_AutoInit: ACPNotifyPlayEvent complete
00;00;06;558:    ACP_AutoInit: NDMInitialize complete
00:00:06:962: ACP: Mounting "/vol/save/" on "/vol/storage_mlc01/usr/save/00050010/10040100/user/"
00:00:06:962: ACP: Mount done (0)
00;00;06;835: ACP: initialized
00;00;06;835: [barista] Product {:program=>38956, :message=>43332, :programProj=>39097, :root=>39136, :sead=>37528, :resource=>39136}
00;00;06;835: [barista] Cafe OS SDK Version 2.12.11 Build 66642 Branch 

00;00;06;835: ### Application Start Time [01:09:17] ###
00;00;06;835: =================================
 MEM_ARENA_2: total free size =  989763(KB),  966(MB)
=================================
00;00;06;855: WPAD: Application Init
00;00;07;993: rpl_entry
00;00;07;993: OSDynLoad_Acquire() use [2701564]
00;00;07;993: ErrEula: client version 3.
00;00;07;993: ErrEula: thread=0x4c606540, stackSize=      64 KB, stackBase=0x4c60652c, stackEnd=0x4c5f652c (ErrEulaCreate)
00:00:08:403: IFNET_ETH: Link DOWN.
00;00;08;415: == sysapp == new path
00;00;08;415: ==== sysapp:dump data 91 ====
00;00;08;415:       q <sys:caller_id size=8>Menu<sys:caller_process size=4>mlc <sys:caller_device size=4>
00;00;08;415: ==== sysapp:dump data 0 ====
00;00;08;415: 
00;00;08;459: ==== sysapp:dump data 0 ====
00;00;08;459: 
DRMAPP: built Jul 28 2015 20:01:32
00:00:10:455: MCP: PID 10 requested to enable power transitions
00:00:10:456: MCP_PowerButtonControl(1) returned 0
00;00;10;446: product area 2 drc area 1
00;00;10;450: __CCRSysNeedsDRCFWUpdate : language drc version 1702 data version 1702
00;00;10;453: __CCRSysNeedsDRCFWUpdate : firmware drc version 190c data version 190c
00:00:10:750: ACP: USB Storage: /vol/storage_usb01
00:00:10:769: ACP: USB storage mounted.
00:00:11:519: [BOSS] BG stress mode is disabled.
DRMAPP: kick task: 1
DRMAPP: manage state 0 -> 0
DRMAPP: Patch: scene state: 302252045 -> 0
DRMAPP: mediaType = 2, app-box deviceType = 4
DRMAPP: running title = 0005001010040100, deviceType = 3
DRMAPP: Retrieve pre-order flag for title 0005000057555000 (mediaType = 2)
DRMAPP:   --> false
DRMAPP: kick task: 5
DRMAPP: manage state 0 -> 3
DRMAPP: Patch: scene state: 0 -> 3
DRMAPP: kick task: 4
DRMAPP: manage state 3 -> 4
DRMAPP: Patch: scene state: 3 -> 4
DRMAPP: Get title version info.
DRMAPP: Error Code: 0
DRMAPP: manage error occurred:
DRMAPP:   error code        0
DRMAPP:   post error state  42
DRMAPP: Patch: scene state: 4 -> 40
00;03;07;470: ErrEula: thread=0x100457e0, stackSize=      63 KB, stackBase=0x1069b138, stackEnd=0x1068b140 (ErrEulaAppearError)
00;03;07;470: ErrEula :ErrorCode = 1999999
00;03;07;476: ErrEula: thread=0x11bef778, stackSize=      16 KB, stackBase=0x11bef768, stackEnd=0x11beb768 (ErrEulaDrawTV)
00;03;07;476: ErrEula: thread=0x11beaee8, stackSize=      16 KB, stackBase=0x11beaed8, stackEnd=0x11be6ed8 (ErrEulaDrawDRC)
00;03;07;485: ErrEula: thread=0x100457e0, stackSize=      63 KB, stackBase=0x1069b138, stackEnd=0x1068b140 (ErrEulaCalc)
00:03:07:614: CSC: Product Code: WUP-N-HASE, Title Version (major): 13
00:03:07:627: CSC: Repaired: FALSE, Wagon: FALSE
00:03:07:632: CSC: InitialLaunch stage: 2
00:03:07:636: CSC: USB Storage Connected: TRUE, Device Type: NAND
00:03:07:657: CSC: RCA Enabled: FALSE, KeepAlive Enabled: FALSE, ParentControl Enable: FALSE
00:03:07:659: CSC: Check : /vol/storage_mlc01/usr/boss/00050010/10040100/user/common/ (-196631)
00:03:07:660: CSC: Check : /vol/storage_mlc01/usr/boss/00050010/10040100/user/8000000b/ (0)
00:03:07:661: CSC: Boss Storage Exist: TRUE, NetworkID Assigned: TRUE, System Network Connected: TRUE
00:03:07:687: CSC: NIC Type: WIFI, DNS obtained by DHCP: FALSE, IP obtained by DHCP: TRUE
00:03:07:693: CSC: TV Port: HDMI, TV Aspect Ratio: 16:9
00:03:07:699: CSC: TV Resolution: TV_1080P
00:03:07:699: CSC: CODE: [HASE-0250-7175]
2018-01-02 01:12:18 - log collection event from pid 21
00;03;07;579: (1)5.5.2 U
00;03;07;579: (2)WUP-101(02)
00;03;07;579: (3)FW702985384
00:03:07:703: MCP: life time number of fatal errors - 27
