Hacking Issues with WAD files and black screen when running Wii games.

[Jap]

Hi All,

I have written up steps as to why im asking this question and will post up my syscheck. Any input would be greatly appreciated. After softmodding a Wii years ago manually step by step I have done another one using ModMii but ran into some issues, namely being that when i load Wii games i get a black screen. I thought this would be software related but all my iOS files look right. USB Loader GX (r1268) is using the correct iOS files as mentioned by Cyan in the link below so i am trying a different USB to check if this was causing the issue. GC games work with no issue. Black screen also happens with configurable USB loader.

Following Cyans advice on this thread: gbatemp.net/threads/usb-loader-gx-black-screen-when-loading-wii-games.366033/
I went to reinstall the 2 WADs used by USB Loader GX.
cIOS249[56]-d2x-v8-final
cIOS250[57]-d2x-v8-final

This is the part that worries me and the reason i created the thread:
I went into Multi Mod Manager to reinstall all WADs provided by ModMii. They all failed with the exception of IOS58-64-v6176. Which would always complete while the others failed.
I then tried to uninstall all WADs to then reinstall however this did not work (thank god i didnt realize the risk) either and failed with an error -2011 or something along these lines.
I then used WAD Manager v1.7 to uninstall and reinstall the 2 WADs mentioned in the forum post. Between uninstall and reinstall i went back in and realized for some reason the IOS was set to 58 when it should've been 249. I was not sure if i had installed using 249 or 58 ss it had set itself to 58 (possibly from reinstalling it using MMM).
To be safe (so i thought), i chose ios58 uninstalled the 2 WADs (went through, and said uninstalled successfully) and went to reboot by exiting WAD manager v1.7. The system froze and i had to hard reset the Wii.
Went back into WAD manager, chose ios246 and uninstalled and reinstalled again. Exited to reboot and it worked without issue.

My question is , according to the syscheck below the 2 WAD files in question are installed on the right iOS's. If they had not been, would this be shown below? (I.e if i had chosen a different IOS (58) the system would have it listed below). Is it possible to have the same WAD on two different IOS's?

As the system froze upon reboot i was worried i uninstalled them when i shouldnt have (i.e it wouldve been better to leave them there then uninstall as they may have previously been system files).

I am still receiving the black screen and USB Loader GX is bugging out by not showing any Wii Games on boot, when i go to the selection and tick Wii games, the cursor/remote works but when i click anything its unresponsive, besides this the wii is working completely fine. I have decided to leave it as is rather than restore from NAND and start over. I appreciate any feedback, apologies for the long post i just summed up my experience in the last few days.

sysCheck v2.1.0b19 by Double_A and R2-D2199 Nano
...runs on IOS58 (rev 6176).
Region: PAL (original region: AUS)
System Menu 4.3E (v514)
Priiloader installed
Drive date: 2008.07.14
Homebrew Channel 1.1.2 running on IOS58
HomebrewFilter ist nicht installiert
Hollywood v0x11
Console ID: 86038727
Boot2 v4
Found 80 titles.
Found 50 IOS on this console. 5 of them are stub.
IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug NAND Access
IOS80 (rev 16174): Trucha Bug NAND Access
IOS202[60] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS222[38] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access USB 2.0
IOS223[38+37] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access USB 2.0
IOS224[57] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS236[36] (rev 65535 Info: rev 3351): Trucha Bug ES Identify NAND Access
IOS249[56] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS250[57] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 2018/01/12.

 

[jeannotte]

Hello

Support usb in which format ??


Test a game with a usb key?

 

[Jap]

Hello

Support usb in which format ??


Test a game with a usb key?

The USB is in FAT32 format with a 32kb cluster. I tried a different USB but still get the black screen from time to time. Resetting the console rectifies the issue and the games will play so not sure if this is an iOS issue.