[How-To]Get 11.4 Emunand working on Gateway with online access!

Discussion in '3DS - Tutorials' started by telon22, May 31, 2017.

  1. telon22
    OP

    telon22 GBAtemp Regular

    Member
    282
    69
    Jun 28, 2014
    India
    Its not my claim as I use 1.9 myself but this gives illusion of choices for doubtful users at the very least, so no harm done.
     
  2. Kazuma77

    Kazuma77 GBAtemp Maniac

    Member
    1,000
    411
    May 11, 2008
    United States
    Fair enough.

    I just thought it best to clarify some things. I especially didn't want people to think that there are "new" and "old" variants of the same IDs. Because I can just see someone downloading the same titles 3 times before they finally realize they're looking at the wrong list, lol.

    EDIT: Finally tried it. The first attempt failed. I did have to leave out 000400300000CC02 and 0004013000008002 to get it working on an O3DS. So, apparently it's not just the EUR units that have this issue. But GW is booting now with my partial 11.5 update. Thanks again for the info. Now, time to see if I can get Safe A9LH Installer working in B9S. Not that I have a reason to go back. But, not having a simple way to go the other direction without a backup just bothers me.
     
    Last edited by Kazuma77, Jul 21, 2017
  3. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    SD Card One - Gateway 3DS (w/ FastBoot)
    SD Card Two - Luma3DS CFW

    No SD Card - Default SYSNAND At Boot

    Can a set-up Like tHis work?
     
  4. telon22
    OP

    telon22 GBAtemp Regular

    Member
    282
    69
    Jun 28, 2014
    India
  5. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    if you take out the SD Card that you use to set up this chain installation with wen u Boot ur 3DS(XL), Does your system Boot to Default SYSNAND?
     
  6. telon22
    OP

    telon22 GBAtemp Regular

    Member
    282
    69
    Jun 28, 2014
    India
    Yes, you can do that just do complete guide.
     
  7. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    The guide says:

    But where is this /luma/payloads folder?

    Does this guide only work if you have LUMA3DS CFW set up first?
     
  8. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    ok GoT Luma3DS 11.5 CFW running, But How Can One Access Their Default SYSNAND which is pre-11.5?

    Kus Even when my SD card is taken out, my system is at 11.5 (But perhaps this is a config setting that is set oN with LUMA3DS After using the 3ds.guide, and thus can be taken out???
     
  9. telon22
    OP

    telon22 GBAtemp Regular

    Member
    282
    69
    Jun 28, 2014
    India
    Just before booting luma press select and you can all options there and check whatever you need. also after following that guide follow this https://gbatemp.net/threads/tutorial-using-luma3ds-gateway-on-b9s.431691/
     
  10. Kazuma77

    Kazuma77 GBAtemp Maniac

    Member
    1,000
    411
    May 11, 2008
    United States
    Forget that nonsense. You don't need v2gw.bin or any such BS. You just need a copy of the GW payload converted using firmtool. I posted a copy here already. BootCTR9 can boot it straight. You can (and probably should) completely forget about using Luma's chainloader. BootCTR9 lets you choose what you want for a default, works with GW straight, lets you pick whatever you want for a default (GW included), has animation options and other advanced features because it uses a proper configuration file instead of a naming scheme, and can run old .bin payloads (Puma33DS for example, one of the few things that can run a 9.2 EmuNAND on an N3DS, though even that needed a fully decrypted 9.0 firmware.bin -- use GM9 for that, Cakes misses the ARM9 part, never mind it's decryption routines aren't exactly working properly on the N3DS under B9S anyway).

    If you can't be bothered to setup a configuration file (though it's really easy if you know how to copy and paste), I'm working on an AIO pack with pre-made configurations ready to drag and drop (for a certain iso site, because it's including everything, and we can't upload files containing firmware here). I'd have it up already, but that Cakes issue I mentioned forced me to fully decrypt the firmwares I'm including for the N3DS copies. This will have almost every CFW on hotkey, not just Luma and GW. You may not ever use them all, but if there's room on the chainloader, why not? And it will let you pick between BootCTR9 (hotkeys), CBM9 (menus), and Luma (for those who simply must go there). The latter two have to use BootCTR9 for GW and Puma, but I've made it completely transparent (in CBM9's case, by using it's patching feature to load multiple .ini files).

    Also, you might want a second EmuNAND on 9.2 to run homebrew. There are many FPS conversions that are broken atm. There are some things that will probably just never work. You don't have to use separate cards, though. One card can have up to 4. Just use 3DS Multi EmuNAND Creator. But 1.71 seems to have a bug that corrupts the card when I try to make EmuNAND 3 every time, so, I uploaded a copy of 1.61 I found.
     
  11. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    Does using 3DS Multi EmuNAND Creator erase all my files on my SD card iN order to create a new EMUNAND partition?

    Kus I'D Luv to run my EMUNAND at 11.2 for the most recent GW Launcher to work, But i think my Latest NAND fiLe may be at 9.2...

    So Do u suggest running SYSUPDATEr once 9.2 EMUNAND is set to get it at 11.2 (so that way the most recent gateway Launcher can work...

    or Does 3DS Multi EMUNAND creator simply make A CLONE of one's kurrent SYSNAND?
     
    Last edited by xxfliermiles, Jul 25, 2017
  12. Kazuma77

    Kazuma77 GBAtemp Maniac

    Member
    1,000
    411
    May 11, 2008
    United States
    Yes, it will erase all files on the card. It has to re-format the card to make room for the EmuNAND. I had to back everything up. But I wanted a 9.2 because things like ctrQuake (Quake with online MP), Spectre3DS (Quake with stereoscopy and music, but no menu) and ctrHexenII aren't working in Rosalina. You have to inject to create the additional EmuNAND, so, the NAND dump you want to use has to be on your PC. Though the tool can dump EmuNANDs directly, so this is not a problem usually. You can just dump the first one and clone it if you want to. It will work with any existing NAND/EmuNAND backup you have (just make sure it's for the right device). If you don't want to format your card, you can just use a second card. Or if you're not into homebrew that much, you can skip it completely.

    It's easy to get 9.2 working on an O3DS. Puma will work. Cakes will work if you give it a 9.0 firmware, etc. It was a bear getting it to work on an N3DS. Cakes won't decrypt 9.0, and still won't work even after using GM9 to decrypt it. Puma won't work by itself, but giving it the decrypted 9.0 firmware.bin I was trying to use with Cakes finally got it to work. I've currently got Puma on Y, and GW on B, so this works out well. Legacy may also work, but I'm not so frustrated with Rosalina to just drop 8.x (not that 8.x and Legacy can't be run side by side, but redoing the configuration gets old fast). Rosalina will be great. We just need to be patient.

    SysUpdater works fine for updating from a 9.2 to 11.2 (and from there even to partial 11.4). It also works for downgrading an 11.5 to 11.2 though. It just depends on which you want to do. I like having mine linked, so I can sync tickets (I have even created a GM9 script for that), so, assuming the 9.2 has been formatted to unlink it, I would downgrade the 11.5, but that's me. If you need any firmware sets, the latest 3DNUS works well. Just type in the one you need (11.2.0-35U or 11.4.0-37U for example) and make sure you have the right hardware selected. For 11.4, of course, don't forget to leave the ones mentioned out, including 000400300000CC02 (D402 with EUR consoles) and 0004013000008002 if it's an O3DS or O2DS. Also, avoid 11.5 for now (unless you just want to do Nver and Cver for cosmetic purposes, creating fake videos on Youtube, etc.). I got it to boot, but had problems with the select menu not working.
     
    Last edited by Kazuma77, Jul 26, 2017
  13. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    if EMUNAND is set up with Another SD Card (that way my first SD carD isn't wipeD), is EMUNAND stiLL AccessiBLE Once The 1st SD CarD is re-inserteD?
     
  14. Kazuma77

    Kazuma77 GBAtemp Maniac

    Member
    1,000
    411
    May 11, 2008
    United States
    If your first card doesn't have an EmuNAND, then no. EmuNAND is a copy of NAND on the SD card. What I was saying is that it's possible to have an 11.2 on one, and a 9.2 on a second card. They will not interfere with each other. I was assuming you already had one EmuNAND setup for GW on the first card.

    If you have no EmuNAND, and you have two cards that are the same size, you could set the EmuNAND(s) up on the second one, perform a backup of the first one while you sleep, and then transfer the contents to the second card when you wake up. You get a copy of your first card with EmuNAND(s), and you can still use your first card in your 3DS while you wait for the files to transfer.
     
  15. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    At the moment SD Card One is LUMA3DS CFW 8.1 (SYSNAND FW 11.5)

    SD Card Two is 11.2 GW EMUNAND But Does Not Boot....


    So is there anyway to transfer the 11.2 GW EMUNAND from SD Card Two ONTO SD Card One without Losing the fiLes oN SD Card One?

    If that is Not going to work... Is there anyway to Boot iNto 11.2 GW EMUNAND When SD Card Two iS iN MY DS (even though my SYSNAND is at 11.5)?

    Note SD Card One is Not The Same Size as SD Card Two... SD Card Two is just 4GBs, (SD Card One is over 32GBs)....
     
    Last edited by xxfliermiles, Jul 26, 2017
  16. Kazuma77

    Kazuma77 GBAtemp Maniac

    Member
    1,000
    411
    May 11, 2008
    United States
    Well, if SD card 1 has no EmuNAND, you could just copy the contents to SD card 2. The thing is, your system will not boot without a "boot.firm" primary payload on the card (or your CTRNAND partition, which it will fall back on if it doesn't find it on the card). But if you copy the content from card 1, your system will boot using whatever primary payload is on card 1. If you followed the guide, that's Luma. That's OK though. Luma has a chainloader built in that can load other things. It's not as good as BootCTR9 IMHO, but it will work. You don't need different cards to run different things when you have a chainloader. You just set the other stuff you want to run up as hotkeys.

    Now, I have pre-made configurations you can just drag and drop to card 2 to see if that helps. I haven't uploaded them yet, but I'm going to place them in the CFW section of a certain iso site if you can find it. I can't place it here because of the firmware files it contains. The name of the thread should be something like "B9S AIO Pack R1" when I create it. I've been planning to put it up for days, but, I keep having to fix things. Stuff that works fine on the O3DS breaks on the N3DS, etc. Today should be the day though. If they get GW booting (hold B unless you pick CBM9, in which case, hold down) with your EmuNAND, then it would just be a matter of copying the "Nintendo 3DS" folder from your first card over, and you could have it all on one.
     
    Last edited by Kazuma77, Jul 26, 2017
  17. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    right now my ctrNAND partitioN is LUMA 3DS 8.1 (CFW 11.5), so even if there aren't any SD cards iN my O3DS, THiS WiLL Boot....

    Ok cool great...

    Now because there are .cia files and what not on my SD card one, if there is a chance for me not having to bacc these fiLes up and re-formatting tHis SD Card (so that GW 11.2 can boot again), i'D prefer to use that chance....

    Thus is there anyway for me to simpLy LOAD my SD Card #2 which has GW EMUNAND 11.2 just by using BootCtr9 for e.g....

    AND if tHis is the case, Does there neeD to Be A SpeciAL fiLe on mY SD CarD 2 for BootCtr9 to run\to Boot my GW 11.2?

    This way even if there is no chain LOADEr on my O3DS, tHere stiLL is A way for me to Use MY SD Card One for my .cia fiLes for FW 11.5, AND MY SD Card Two (BooteD thru BootCtr9 or any other App u can suggest???), just to get my GW Launcher BACC, since it won't run on 11.5!
     
    Last edited by xxfliermiles, Jul 26, 2017
  18. Kazuma77

    Kazuma77 GBAtemp Maniac

    Member
    1,000
    411
    May 11, 2008
    United States
    My full configurations are up if you can find the CFW discussion section of a certain iso site. Try copying the BootCTR9 one to card 2. Hold B to boot GW. The default is Luma. This can be changed though. I've included an alternate configuration that ends in "_gw" if you would rather that be the default.

    If you can't find it, just wait, I'll put a lite version up here.
     
  19. xxfliermiles

    xxfliermiles Member

    Newcomer
    29
    0
    Jul 21, 2017
    Armenia
    The only purpose for me to use mY SD Card Number Two wiLL Be tO Boot mY GW EMUNAND 11.2 so if u Have a config fiLe whicH Boots GW By DefaULT perhaps it is worth it to LeecH it frum u?
     
  20. Kazuma77

    Kazuma77 GBAtemp Maniac

    Member
    1,000
    411
    May 11, 2008
    United States
    If you can't find the full version, I've got the lite file ready, but I want to release it as it's own thread, and as usual, the devil's in the documentation. But I have the words from the full release to work with. Anyway, I'll start typing. I'll let you know when it's ready. As I said, the .ini file is there. It's not the default because I'm assuming most people want that to be Luma. But it's easy to rename.

    EDIT: OK, it's here if you want to check it out. Maybe we should continue this conversation there, because we're kind-of getting off topic.
     
    Last edited by Kazuma77, Jul 29, 2017