Hi, I have a question. I've put the .3dsx file on my SD, booted the homebrew launcher and entered the 2DSaver_installer but it shows as: No OOT gamecard detected! filesystem cannot init and when I try to install to any Slot it shows as Installation failure C920454F. What can I do? I do have a USA Ocarina of Time gamecard and it's properly detected by the 3ds itself, I have no free slots, that should be the problem? Thanks!
Hi, I have a question. I've put the .3dsx file on my SD, booted the homebrew launcher and entered the 2DSaver_installer but it shows as: No OOT gamecard detected! filesystem cannot init and when I try to install to any Slot it shows as Installation failure C920454F. What can I do? I do have a USA Ocarina of Time gamecard and it's properly detected by the 3ds itself, I have no free slots, that should be the problem? Thanks!
I've just erased all saved data with that button combination. Same result. No OOT gamecard detected! Is it just putting that .3dsx file on the 3ds folder?
Since I couldn't find an answer I've tried to inject the payload.bin and save00.bin files onto the OOT gamecard following these steps from another page:
Here's what you do:
Delete all data in the OoT Cart by following the instructions at the top of this post.
Install Save Manager into your SD card's 3ds folder.
Download that saveDataBackup zip file, and extract the folder to the root of your SD card. You should end up with payload.bin and save00.bin inside a saveDataBackup folder.
From there, load Save Data Manager.
Press B to import the save data. This will take the content from that saveDataBackup Folder on your SD card, and put it into your OoT Cart
That savedatamanager app detected the OOT gamecard and searched for that folder and injected the file, I think? I cannot try yet because my friend who's got the 2DS with the problem is coming tomorrow. Anyone knows if I'm in the right path? Thanks!
I've just erased all saved data with that button combination. Same result. No OOT gamecard detected! Is it just putting that .3dsx file on the 3ds folder?
Since I couldn't find an answer I've tried to inject the payload.bin and save00.bin files onto the OOT gamecard following these steps from another page:
Here's what you do:
Delete all data in the OoT Cart by following the instructions at the top of this post.
Install Save Manager into your SD card's 3ds folder.
Download that saveDataBackup zip file, and extract the folder to the root of your SD card. You should end up with payload.bin and save00.bin inside a saveDataBackup folder.
From there, load Save Data Manager.
Press B to import the save data. This will take the content from that saveDataBackup Folder on your SD card, and put it into your OoT Cart
That savedatamanager app detected the OOT gamecard and searched for that folder and injected the file, I think? I cannot try yet because my friend who's got the 2DS with the problem is coming tomorrow. Anyone knows if I'm in the right path? Thanks!
To use the 3dsx installer I just put the 3dsx, smdh and xml files in the 3ds folder. Do I need the other files like romfs or the save manager files save00 and paylaod? Asking as when just using the 3 files in the 3ds folder it says:
Opening hax save ...
Installation failed
000000001
To use the 3dsx installer I just put the 3dsx, smdh and xml files in the 3ds folder. Do I need the other files like romfs or the save manager files save00 and paylaod? Asking as when just using the 3 files in the 3ds folder it says:
Opening hax save ...
Installation failed
000000001
Hi all. Im in deep trouble... i have a EU 2ds that i tried to install cfw. Because im such an idiot and noob at this (cant remember why) i have bricked my console. Im stuck at the 3d calibration and cannot update it in recovery mode. Does this method evolving cubic ninja or ocarina of time will really work on me? Can anyone explain me what i need to do or buy like you would explain it to a child or point me to it? Ps: probably i deserve this but my poor 2ds does not
Thanks in advance
Can you help out this portuguese brother? what exactly do i need to do from the start? im stuck at the 3D calibration screen and cannot update from recovery mode. thanks in advance
Thanks for the reply gamesquest1 ! so if i buy powersaves and oot i will unbrick my 2ds for sure? im kind of poor thats why im asking because i can not afford to "throw" money away... cheers guys
yeah although you may be better following my advice for the last person and seeing if someone on here can sell you a copy of oot with 2dsaver pre-installed so you don't have to waste money on a one time user item, then you can resell the cart after the fact and be pretty much square
OK it must have been a different thread I shared this idea with someone, but it's fairly simple
Hi all. Im in deep trouble... i have a EU 2ds that i tried to install cfw. Because im such an idiot and noob at this (cant remember why) i have bricked my console. Im stuck at the 3d calibration and cannot update it in recovery mode. Does this method evolving cubic ninja or ocarina of time will really work on me? Can anyone explain me what i need to do or buy like you would explain it to a child or point me to it? Ps: probably i deserve this but my poor 2ds does not
Thanks in advance
Can you help out this portuguese brother? what exactly do i need to do from the start? im stuck at the 3D calibration screen and cannot update from recovery mode. thanks in advance
It's the first Nintendo Switch firmware update of 2024. Made available as of today is system software version 18.0.0, marking a new milestone. According to the patch...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
Yet another casualty goes down in the never-ending battle of copyright enforcement, and this time, it hit a big website which was the host for many fangames based and...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
The romhacking community is always a source for new ways to play retro games, from completely new levels or stages, characters, quality of life improvements, to flat...
Retro handheld manufacturer Anbernic is releasing a refreshed model of its RG35XX handheld line. This new model, named RG35XX 2024 Edition, features the same...
It's the first Nintendo Switch firmware update of 2024. Made available as of today is system software version 18.0.0, marking a new milestone. According to the patch...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Yet another casualty goes down in the never-ending battle of copyright enforcement, and this time, it hit a big website which was the host for many fangames based and...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...