Hardware 2ds ds slot bent now all is write protected

[jaysea]

My son ejected the sd card from the slot and tried to put it back in the wrong way. While doing this he broke the micro sd card so I used another sd card but it keeps saying that the card is write protected.
I already used the tape trick so it really isn't the lock switch anymore.
Then I opened up the ds and saw that the lock switch in the sd slot was bent.
Is there a way to let the sd slot always think that the sd is not locked or maybe even doable using some cfw trick?
I manage to read and write on the sd using godmode9, but can't seem to make the 2ds load anything from the sd when running luma or ofw. The 2ds ignores the card.

 

[wormdood]

Then I opened up the ds and saw that the lock switch in the sd slot was bent.

you either need to manually bend it back to the original position or replace the sd slot

 

[jaysea]

But that is the problem. I do not know how it should be in the original position.
Also replacing the slot in o3ds requires a screwdriver only. It seems that in the o2ds it is soldered right onto the print.

Edit: what should the paper clip kind of thing in the sd slot touch or not touch when the sd card is inserted?