Search results

  1. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    That is a kiosk console. You need a modchip to fix it
  2. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    clk is a tad low and b should be around 2.9v
  3. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    diode readings for all points - ps personally i don't like the flexes
  4. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Post pics of install and also which switch 1689606285 What is your diode reading for DAT 0?
  5. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Modded plenty of 360s with this tool and worked like a bomb - IPA at the end waiting for the sound. Priceless
  6. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    "My friend" did 1 oled and throwing us facts here about wires. Here we've done over 20 installs :)
  7. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Most likely bad soldering / dry joints - Ive had hwfly and tx mod chips for over 3 years. No issues
  8. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Most of the time if you getting black screens then the connector is damaged. Check the connector on the board the ribbon is not that clear so cant see - maybe its glitching but we cant see cos the screen error
  9. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes Ammeter to check if there is power draw - also check your lcd connector for damaged pins
  10. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Probably dead and shorted the system with the battery. Need to check m92 and Bq for shorts and perhaps get an ammeter to check power draw
  11. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Does it boot to ofw?
  12. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Need an ammeter to check power draw. I would toss the pico and try and get the device to boot normally then work back wards. Does it still boot?
  13. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Blue Screen could also be corrupted nand - check your clk point looks like its grounded to the ground point. Dat 0 also looks a bit wonky
  14. cowboy619

    Picofly AIO Thread

    You need to repair the trace if not trace is under the apu pretty much dead. We need close ups of the point Sent from my iPhone using Tapatalk
  15. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Those resistors are holding on for dear life. Check diode readings on all points and report back with values Sent from my iPhone using Tapatalk
  16. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Check resistors and solder points Sent from my iPhone using Tapatalk
  17. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes all oleds are the same Sent from my iPhone using Tapatalk
  18. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Boot on first boot up. Hold vol+ then power on or run ofw from hekate Sent from my iPhone using Tapatalk
  19. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Boot into full stock and reset the switch Sent from my iPhone using Tapatalk
  20. cowboy619

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes you can Sent from my iPhone using Tapatalk
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: https://www.youtube.com/@legolambs