Search results

  1. mvmiranda

    Switch Lite ZL always "pressed" (high resistance against GND)

    Hello all, Long time since I've posted here and I'm back again with a brand new issue I'd like to discuss with you and get some inputs. I received this Switch Lite the customer attempted to mod with a HWFLY Lite 4.1 and ended up partially removing the mainboard FPC white lid (the FPC that...
  2. mvmiranda

    Switch OLED missing the CMD capacitor

    Hello! I have a Switch OLED someone else tried to perform a modchip install and knocked off the CMD resistor in the process. He didn't try to turn the board on when he noticed he removed the res. Does anyone happen to know the resistor value? Thanks!
  3. mvmiranda

    Switch Lite + SX Lite odd behavior (glitches but no screen)

    Hello, I have a very odd issue with a Switch Lite with a SX Lite (original chip). Someone else has tried to install another SX Lite in this console and claimed the same thing. One thing I need to mention though is that when I received the console to redo the work, apparently there was a small...
  4. mvmiranda

    Hardware Switch V1 - Failed to init eMMC (known good eMMC also fails)

    Hello, I recently bought a Switch V1 with a failed to init eMMC error on Hekate. The consoles instantaneously enters RCM mode once turned on and the eMMC benchmark only says it cannot be initialized. I bought it since this could mean a lose eMMC module (never happened to me but could be the...
  5. mvmiranda

    Hardware Switch V1 no USB data activity issue (everything else works - dock, charge, etc)

    Hello, I have a Switch that only powered on one side of the USB C cable, stopped working on the dock and was not being recognized by the PC/dongle when entering RCM mode. I knew this was a USB-C issue and I've done several USB swaps before. I proceeded removing the old connector and put a brand...
  6. mvmiranda

    Hacking Switch V1 with modchip and Atm - Main BCT is improper error

    Hello, I just came across this console XAW1010 jailbroken with SX Core. The console is at 11.0.1 and I'm trying to run Atm but I'm getting this message stating the "main BCT is improper". If I switch to SXOS boot.dat and do a cleanup and genuine boot it boots fine. I understand there is a...
  7. mvmiranda

    Hacking [SWITCH RCM] Semi-brick error 2002-4686 after failed NSP install

    Hello all, TL/DR: Switch V1 RCM that was running SXOS semi-bricked after a "seemingly successful" NSP install, and gives me the error 2002-4686. Tried updating online, rebuilding the MMC, downgrading to 9.2.0 with no success. Please, read below for an in depth explanation!. I have a Switch V1...
  8. mvmiranda

    Hardware Switch Lite LCD issues: flicker, low quality and "burned in" images

    Hello all, I have a customer's Switch Lite with some issues on the display side. The customer tried to install the SX Lite and, after a failed attempt, gave up. There is no missing cap on top of the APU, the board is missing the microSD cap for powering up the SX Lite, there seems to be no...
  9. mvmiranda

    Hardware What is the capacitor value on top of Nintendo Switch APU?

    Hello all! Does anyone know what is the value for the capacitors on top of the Nintendo Switch APU for both the normal (V1, V2) and Lite? I suppose they are the same value for all of these versions, or at least the same for Marikos. Thanks!
  10. mvmiranda

    Hacking SX Lite blinks blue and green but the screen doesn't turn on

    Hello! I installed a SX Lite modchip and everything went smooth: solder is fine, the chip blinks blue then green but the screen doesn't turn on. I have tried reprogramming the chip, using SX Updater, and swapped the chip three times (just for the sake of sanity) but the scenario is the same...
  11. mvmiranda

    Hacking [SX Lite] Bricked the console by just installing the chip! Purple screen all the time now. Pics!

    Hello, I'd like an advise on a very specific subject. TL/DR: after just installing the SX Lite modchip the console only gives me a purple screen. No NAND dump or emuNAND creation was tried before neither any NAND tempering was done by me at all! Long version: I use official products from an...
  12. mvmiranda

    Hardware Nintendo Switch Lite battery connector

    Hello, A customer tried to do the new modchip on his Switch Lite and ripped the battery connector from the motherboard (it actually broke it in half) and I'm trying to find one for buying with no success. Does anyone here know what's the battery connector the Switch Lite uses? Thanks!
  13. mvmiranda

    Hardware Switch v1 stuck at Switch Logo after installing SX Core

    Hello! I have a Switch v1 stuck at the Switch Logo after installing the SX Core chip. The solder is fine but it wont pass after the logo. All it was done on the console was an emunand creation. It could be the dreaded wifi chip failing or a corrupted NAND, right? Is there any way I could quickly...
  14. mvmiranda

    Hacking Switch v1 without EMMC NAND module

    Hello all, I have a Switch v1 with a missing EMMC module and since I have some laying around I decided to create a NAND based on a 5.1.0 donor using TegraRcmGUI and HacDiskTool. I was able to perform everything without a hiccup but I noticed 3 things: 1) The console does not boot in the...
  15. mvmiranda

    Hardware Nintendo Switch V1 (XAW10003611*) does not inject payloads

    Hello all, I'm having as weird issue with a new V1 Nintendo Switch I bought: it does not inject payloads!! Let me explain better. The switch's serial is XAW10003611* and it's, clearly, within the range of consoles that accept the RCM method. But when I put the jig and perform the VOL_UP + POWER...
  16. mvmiranda

    Hacking Question How can I restore a console's PRODINFO from Atmosphere's auto backup file?

    Hey everyone, I have just bought a new modded Switch and the former owner did the Ingognito_RCM payload method to remove the PRODINFO from the SysNAND. I searched on the SD card and I could not find the file this payload generates but there is a file named "XAW00000000000_PRODINFO.bin" (or...
  17. mvmiranda

    Hacking Switch does not work reliably when on RCM mode (not AutoRCM)

    Hey everyone! I'm facing a very weird issue with one of my Switches and I need some advises. First, let me explain in detail the issue and what I have done so far. The console is running SXOS and had AutoRCM enabled. Two weeks ago I let the battery run out and the console died! It was not...
  18. mvmiranda

    Hacking Wii U stuck on "formatting the system" screen.

    Hello All, I have a Wii U stuck on the "formatting the system" screen. As soon as I turn it on it enters this screen and stays there until a shutdown. It stays in this loop endlessly. Although the screen is in Portuguese, this is the standard "formatting the system" screen. The console...
  19. mvmiranda

    Hacking New 3DS XL black screen weird issue... any help is welcome!

    Hello Guys, Good day to all! Once again I come here seeking some advise or, maybe, a hint from someone who might have encountered the same weird issue. I have this New 3DS XL a customer sent me saying the console started to shutdown all by itself. He said he was playing when it started and...
  20. mvmiranda

    Hardware 3DS screen flickering after hardmod/boot9

    Hey guys, What's up? Long time I don't post a new thread! So... I'm noticing that some of the consoles I mod are suffering from screen flickering for some seconds at the screen corners right after we turn the console on and we get to the Home Menu. Sometimes its just the top screen, other both...
General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: It's mostly the ones that are just pictures and no instructions at all