I think rename should work.
My game Was . N64 when i download it
Gesendet von meinem Huawei P10 mit Tapatalk
This is fantastic...
With the SD mod installed can you just add/delete games using hatchi like you would with games installed on the internal flash?
Or do you still have to delete everything to add new content?
I not Tried the Special hakchi from the sd card mod User.
AT the Moment i take the micro sd card and put it in the PC and Export the game with hakchi USB Version.
I must Export There all game Because i Use folders and hakchi great the Struktur.
I build in a micro sd Port and can take out the card without opening the Mini snes.
I dont needed to connect the Mini snes to the PC with the sd card.
I Use sd card with the USB mod before.
Gesendet von meinem Huawei P10 mit Tapatalk
AT the Moment i take the micro sd card and put it in the PC and Export the game with hakchi USB Version.
I must Export There all game Because i Use folders and hakchi great the Struktur.
I build in a micro sd Port and can take out the card without opening the Mini snes.
I dont needed to connect the Mini snes to the PC with the sd card.
I Use sd card with the USB mod before.
Gesendet von meinem Huawei P10 mit Tapatalk
Last edited by Liriel,
Have you tried the old way, SD Card in the Snes, connect the snes to the pc in USB mode and add a game to the SD that way?
I had said that i dont Tried it Because i dont needed it.
And sd card is better for the USB Port because every put in and out Make the Port get more wobbly.
Only take out the sd card is better.
And hakchi delete always the Existenz games before add the New selection.
Gesendet von meinem Huawei P10 mit Tapatalk
Last edited by Liriel,
it has pro argument.
1 it protects the usb port that it not goes wobbly
2 you need no UsbToGo cable
3 with no UsbToGo Cable there is no other usb port or usb stick that goes wobbly
4 no more extra cable that hang at the back around and it has the original optik
the sd card mod protects the usb port and usb sticks because they are not needed.
i dont found any sd card or sd card port that goes wobbly.
usb, micro usb or mini usb has this problem.
and why to put the mini snes on the pc usb port when you only need the sd card?
the only need to put the mini snes on the pc is when you update the kernel.
and hakchi delete everytime the game folder before it put the new games on thats everytime no matter if it with usb cable, usb stick or sd card.
the only diffference is that the usb is slower that the intern sd card port
It might be more expensive but it wasn't expensive per se... I didn't look for possible breakout boards, just bought it because it was a sure fire.
I'm gonna keep it entirely "internal" you really butchered the back of your console to dig that sd slot. Dunno for the European Snes mini but the vents on the back of the American model should be just wide enough to acomodate an SD card, I'll envisage this too, may fix the board to one of my internal retro receivers so it holds vertically. Can't wait to get that breakout board.
For germany it World 10$ for The board and 15$ the Sending .
Because that i say expensive.
I Look to set it in the vent opening but the micro sd had not enough Room in the EU modell Because the micro sd is to wide for it.
The Problem is that the vent opening are crosswise and Not horizontal.
And then the Mainboard is in the way.
Because that i Make a opening.
And Internal was no Option to me Because i had to opening it every time when i will get the sd card
Gesendet von meinem Huawei P10 mit Tapatalk
Because that i say expensive.
I Look to set it in the vent opening but the micro sd had not enough Room in the EU modell Because the micro sd is to wide for it.
The Problem is that the vent opening are crosswise and Not horizontal.
And then the Mainboard is in the way.
Because that i Make a opening.
And Internal was no Option to me Because i had to opening it every time when i will get the sd card
Gesendet von meinem Huawei P10 mit Tapatalk
Last edited by Liriel,
If you ever so it again, cut your hole with a hot iron. Then use a sharp xacto to even things out.
With the tutorial I have it says hakchi can still upload games.
Last edited by The Frenchman,
I Use a Drill and cut the Rest and Use sanding paper.
With a solding Iron (Lötkolben) it get to big and it stinksauer.
Its for me and must not be top like it is from a factory
Gesendet von meinem Huawei P10 mit Tapatalk
With a solding Iron (Lötkolben) it get to big and it stinksauer.
Its for me and must not be top like it is from a factory
Gesendet von meinem Huawei P10 mit Tapatalk
Last edited by Liriel,
The back side see no one Then me.
For the friends where i should build it There will be better.
AT the Moment i Have some problems with some games like super castlevania (german Patch) or breath of fire 4 that wont run.
I think its the fat 32 System but get ext2-4 run under Windows. [emoji23]
Gesendet von meinem Huawei P10 mit Tapatalk
Similar threads
-
- Portal
- No one is chatting at the moment.
-
@ HiradeGirl:
Any TV with your PC connected with Citra and any smartphone to use as a screen using a free play store app.+1 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
NinStar:
quite ironic that brawlhalla has a far superior netcode compared to smash bros ultimate while offering free online play with crossplay support -
