Hacking [5.5.3 Support] Kafluke's All-in-One Self-Hosting Package 3.0

Psygnosis said:

ok, i did some try today with the new 2.2 package here is the result.

The HBL PHP loader fails 99% of the try. the only way I menage to load it is to take the payload 551 mp4 from @Kafluke 2.1 package and substitute it with the new one in the 2.2 package.
In this way I could load HBL 1.4 with 100% success rate. (I don't know if it load the elf or the rpx either the 2 files are in the hbl folder on the sd card).

Mocha for me loads 80% of the times, but I have an issue that if mocha is loaded I cannot load hbl. I will ask this on the right thread I don't think is a problem of this package.

Click to expand...

Kafluke said:

2/20/2017 - I lied. New version 2.2 released. I updated with Mocha CFW from web. This will allow you to autoboot without HaxChi (albeit slow). Check changelog for other changes.

1-6-2017 - This method is outdated. With HaxChi and cold boot CFW there is no reason to self host anymore. I won't be updating this any further.

All files can be obtained by visiting wiiubru.com/go

8-23-16 - New Version 2.1 Released - Now with 100% launch success on ALL firmwares!

Here is an all in one self contained self hosting solution. There are two zips. One for updating if you have already installed and one containing the xampp server install for getting started.

Includes scripts and payloads from loadiine.ovh and @Cybernatus

I take no credit for any of this. It's all stolen from lots of great users on here. The most recent contribution was from @wj44 and @Cybernatus . Also we have @soulhunter to thank for the current look and feel. Let's not forget @Madridi for the constant demand to get better and keep me on my toes with updates! Last but certainly not least @oldsk00l did an amazing job of figuring out how to get 100% launch rates with 5.3.2 firmware.

Latest stable package = AIO Self Hosting 2.2 (released on 2-20-17)

Full package:
https://mega.nz/#!PkgT3BqR!qtpkOWqm3d-BLmuDLX7sOqd29p-9yqnHl1cRKebxTgs

Without XAMPP and PC Software included:
https://mega.nz/#!a4gj1bJL!EJLoWj6hjPpTYC48i68IGbn2D6jMGubN_TCXuViMpQw

To update: Replace and merge everything from folder "www" to your server. Then replace everything in folder "SD CARD" to your sd card.

Online version = loadiine.ovh/kafluke

New from @oldsk00l , Android AIO with 2.1 package! Super easy to install and use!
http://gbatemp.net/threads/release-...by-oldsk00l-uses-kaflukes-aio-package.439740/

ZSUN users...
This package works for you also. See post here:
https://gbatemp.net/threads/self-ho...ly-self-contained.421341/page-10#post-6651618
thanks @kimchee2000


Instructions for PC self hosting AIO (Also included in zip file)

Spoiler

Instructions:

*note* If Windows defender interupts the unzipping of these files then turn of windows defender real-time protection
and unzip again. The actual exploit payloads are thought to be viruses by windows defender. Or just add an exception inside of your anti virus

*note2* If you can't get any of the self hosting to work then try browsing this site on your wii u. Its the same site just online:
loadiine.ovh/kafluke

1. Install XAMPP to a local PC on the same local network that the Wii U is on
(xampp installer included in the "PC Software" folder)
2. Browse to c:\xampp\htdocs\
3. Create a folder called "wiibrew"
4. Copy everything INSIDE of folder "www" into the folder: c:\xampp\htdocs\wiibrew
Folder should look like:
- c:\xampp\htdocs\wiibrew\cafiine\...
\dumpiine\...
\hbl\...
\kexploit\...
\res\...
index.html
menu.json
menu.json.txt
5. Copy everyting INSIDE of folder "SD Card" to the root of your SD card overwriting files when prompted.
SD card should look like:
- SD:\wiiu\apps\...
\coverM\...
\discM\...
\games\... (put your loadiine ready games in here)
\saves\...
6. Put SD card back in WiiU
7. Turn on Apache in XAMPP
8. Test website on local PC by opening a browser (Chrome or another) and go to:
localhost/wiibrew
9. If you cannot see the webpage on your local PC then you may have a port issue with XAMPP. Post
in gbatemp thread with issues. You must have the xampp page working before you can test on Wii U.
10. 10. Learn your local PC's IP address and use that in the next step.
11. Open your Wii U and open the browser. Click on settings in the upper right corner. Click "Reset Save Data". Now browse the webpage:
http://192.168.0.67(replace with your computer IP)/wiibrew
For example, on my Wii U I type this into the address:
http://192.168.11.169/wiibrew
12. You can launch Homebrewbrew launcher or Loadiine. You should only need to click once.
13. If you want to launch any of the other Homebrew then you will need to run the #1 or #2 kexploit first (each app tells you which one to load first).
14. Tap the browser button and go back to your page and then launch any of the apps listed below the kexploits.

*note* If you change the port number in xampp to make it work then you need to include that in the URL
example:
Changed port to "12345". The address I use in Wii U browser is:
http://192.168.11.169:12345/wiibrew

*note2* If you would like to make shortcuts to direct payloads then type this into your bookmark:
http://xxx.xxx.xxx.xxx/(www folder name)/HBL/(payload file)

So in my examples above I would type this into my 5.5.1 Wii U to bookmark for HBL direct loading:
http://192.168.11.169:12345/wiibrew/hbl/index.php

Here are all the payload links:

Direct Homebrew Launcher:
hbl/index.php = 5.5.0 and 5.5.1 users
hbl/540hbl.mp4 = 5.4.0 users
hbl/payload532.html = 5.3.2 users

Direct Loadiine GX2 0.3 launcher:
loadiinegx2/index.php = 5.5.0 and 5.5.1 users
loadiinegx2/540loadiine.mp4 = 5.4.0 users
loadiinegx2/payload532.html = 5.3.2 users

Loadiine Ready Kexploit:
kexploit/loadindex.php = 5.5.0 and 5.5.1 users
kexploit/540kexploit10.mp4 = 5.4.0 users
kexploit/532kex10/payload532.html = 5.3.2 users

NON Loadiine Kexploit:
kexploit/nonindex.php = 5.5.0 and 5.5.1 users
kexploit/540kexploit31.mp4 = 5.4.0 users
kexploit/532kex31/payload532.html = 5.3.2 users

*note3*

If you want to trick your Wii U into loading the same page every time that you open the browser follow these steps:

1. Let's say I want to load the HBL direct launch every time that I open my 5.5.1 Wii U browser. First turn off your server. (or just turn off wifi)
2. Open the browser and type in the direct link for your exploit (in my case "http://192.168.11.169:12345/Wiibrew/HBL/index.php")
3. The page will fail (if you have your webserver off or ethernet disconnected or wifi turned off)
4. Press the Home button
5. Press Wii U Menu
6. Open Mii Maker and let it load.
7. Exit Mii Maker with the button in the bottom left

Now every time you open your browser it will go to that link immediatly. You can cancel this by following the same steps for a different link.

Troubleshooting:

Spoiler

- Make sure to "Reset Save Data" in your Wii U browser settings before trying any of this.
- If you are getting "SD Mount Failed" or any error message about SD card then follow these steps:
a. First make sure that you have formatted your SD to FAT32 using the tool in the instructions
b. Make sure that you are not using a cheap knock off SD card. Many of those don't work.
c. Make sure that you have copied all files inside of folder "SD CARD" to the root of your SD. It should look like this: SD:\wiiu\...
d. If you are having SD errors pop up or your Wii U is not detecting your SD card then get a can of air and blow out the SD card reader on the Wii U. Also use the canned air on the SD contacts in case any dust or debris has gotten on them. DO NOT USE YOUR MOUTH TO BLOW OUT THE SD READER. Saliva can corrode the contacts inside and will only provide a temporary fix with future problems certain.

Changelog:

Spoiler

2/20/27 - Released 2.2 AIO
-Added Mocha CFW booting from web. (use this for non haxchi autobooting)
- Updated HBL to version 1.4
- Added a few extra HBL apps including the App Store
Full https://mega.nz/#!PkgT3BqR!qtpkOWqm3d-BLmuDLX7sOqd29p-9yqnHl1cRKebxTgs
Without PC Software https://mega.nz/#!a4gj1bJL!EJLoWj6hjPpTYC48i68IGbn2D6jMGubN_TCXuViMpQw

8/23/16 Released AIO Self Hosting 2.1
- All 5.3.2 links are now clickable and working
- Added "Updateremover" to 5.3.2 and 5.5.1 menu.


8/17/16 Released AIO Self Hosting 2.0
- All 5.5.1 links working 100% success!
- Cybernatus provided an alternate Loadiine web app with 100% boot rates for 5.5.1


8/17/16 Released AIO Self Hosting 1.7
- Replaced HBL direct launcher with older version from 1.4 package (users are reporting 100% launch success rate with this version)


8/13/16 Release AIO Self Hosting 1.6
- Added Nexocube's modified new AIO kexploit to the 5.5.1 and 5.4.0 menus
- Updated Loadiine GX2 to latest nightly build (16c5045)


6/4/16 Released AIO Self Hosting 1.5
- Updated Homebrew Launcher to 1.2 RC3

5/21/16 Released AIO Self Hosting 1.4
- Removed Dumpiine from all pages (DDD is better)
- Updated instructions
- Added SD Cafiine to all pages
- Added DDD title dumper server gui to "PC Software" folder
- Added SD Cafiine UI to "PC Software" folder
- Added Save-mii (Saviine server gui) to "PC Software" folder
- Updated to Loadiine nightly to 195aaab



5/14/16 Released AIO Self Hosting 1.3
- Added version number in webpage so I can more easily help users in the forum
- replaced all caps letters with lower case and made changes in php files to reflect that for Linux users
- Incorporated @soulhunter 's latest php fixes. Thanks!
- Fixed Saviine icon
- Removed Dumpiine from HBL menu. It hasn't been updated in a while and DDD is better
- Added FTPiiU to HBL menu
- Updated Loadiine GX2 to nightly 1c4b32c.
- Added Saviine server software to "PC Software" folder


5/13/16 Rolled 1.2 RC2 into main package
AIO Self Hosting 1.2 released
- Whole layout has been cleaned up thanks to @soulhunter
- Updated the SD elf files and deleted all unnecessary files
- Updated instructions with three notes at the bottom
- Created additional "PC Software" folder with Xampp and client software for game dumpers
- Updated all 5.3.2 links to point directly to payloads now!


5/12/16 Created main test package 1.2 RC2
- Incorporated @soulhunter 's AngularJs work.
- Directed all 5.3.2 links directly to the payload.html's


5/12/16 Fixed one broken 5.4.0 link in 1.1 RC1. (Link 1 HBL Direct)
Changed 1.1 RC1 to main release version 1.1


5/11/16 Updated main test package to 1.1 RC1
- Created two menu's for 5.5.1 loading. One has PHP links from Cybernatus and the other is simply MP4's
- Replaced the entire 5.4.0 menu with working MP4 links
- Installed elf file for HBL launching of TCPGecko
- Replaced the entire 5.3.2 with html only links


5/11/16 Updated 551 test package to 1.3
- Replaced all test links with php links with help from Cybernatus (loadiine.ovh)


5/10/16 Updated test package to 1.2
- Added links from loadiine.ovh

5/10/16 Fixed typos in the instructions and added version number to main package 1.0
Updated test package to 1.1
- Removed unnecessary html links (they just pointed to the MP4's anyway)

5/10/16 Created 5.5.1 Test package ver 1.0


5/9/16: Updated Loadiine to latest nightly (nightly-e71fb52) - Now supports DCL you own
Moved all 5.4.0 links back to MP4's until I can figure out another way.
Renamed folders from A and B to "www" and "SD Card"
Updated instructions.

5/7/16: Changed all 5.4.0 and 5.5.1 links to php
Changed all 5.3.2 links to html.

Click to expand...

MarioMasta64 said:

would it be possible for me to acquire the 2.1 package? im looking for the homebrew launcher 1.3 exploit (1.4 tends to freeze up)

Click to expand...

jbuck1975 said:

Launchers
https://github.com/dimok789/homebrew_launcher/releases

Click to expand...

Kafluke said:

2/20/2017 - I lied. New version 2.2 released. I updated with Mocha CFW from web. This will allow you to autoboot without HaxChi (albeit slow). Check changelog for other changes.

1-6-2017 - This method is outdated. With HaxChi and cold boot CFW there is no reason to self host anymore. I won't be updating this any further.

All files can be obtained by visiting wiiubru.com/go

8-23-16 - New Version 2.1 Released - Now with 100% launch success on ALL firmwares!

Here is an all in one self contained self hosting solution. There are two zips. One for updating if you have already installed and one containing the xampp server install for getting started.

Includes scripts and payloads from loadiine.ovh and @Cybernatus

I take no credit for any of this. It's all stolen from lots of great users on here. The most recent contribution was from @wj44 and @Cybernatus . Also we have @soulhunter to thank for the current look and feel. Let's not forget @Madridi for the constant demand to get better and keep me on my toes with updates! Last but certainly not least @oldsk00l did an amazing job of figuring out how to get 100% launch rates with 5.3.2 firmware.

Latest stable package = AIO Self Hosting 2.2 (released on 2-20-17)

Full package:
https://mega.nz/#!PkgT3BqR!qtpkOWqm3d-BLmuDLX7sOqd29p-9yqnHl1cRKebxTgs

Without XAMPP and PC Software included:
https://mega.nz/#!a4gj1bJL!EJLoWj6hjPpTYC48i68IGbn2D6jMGubN_TCXuViMpQw

To update: Replace and merge everything from folder "www" to your server. Then replace everything in folder "SD CARD" to your sd card.

Online version = loadiine.ovh/kafluke

New from @oldsk00l , Android AIO with 2.1 package! Super easy to install and use!
http://gbatemp.net/threads/release-...by-oldsk00l-uses-kaflukes-aio-package.439740/

ZSUN users...
This package works for you also. See post here:
https://gbatemp.net/threads/self-ho...ly-self-contained.421341/page-10#post-6651618
thanks @kimchee2000


Instructions for PC self hosting AIO (Also included in zip file)

Spoiler

Instructions:

*note* If Windows defender interupts the unzipping of these files then turn of windows defender real-time protection
and unzip again. The actual exploit payloads are thought to be viruses by windows defender. Or just add an exception inside of your anti virus

*note2* If you can't get any of the self hosting to work then try browsing this site on your wii u. Its the same site just online:
loadiine.ovh/kafluke

1. Install XAMPP to a local PC on the same local network that the Wii U is on
(xampp installer included in the "PC Software" folder)
2. Browse to c:\xampp\htdocs\
3. Create a folder called "wiibrew"
4. Copy everything INSIDE of folder "www" into the folder: c:\xampp\htdocs\wiibrew
Folder should look like:
- c:\xampp\htdocs\wiibrew\cafiine\...
\dumpiine\...
\hbl\...
\kexploit\...
\res\...
index.html
menu.json
menu.json.txt
5. Copy everyting INSIDE of folder "SD Card" to the root of your SD card overwriting files when prompted.
SD card should look like:
- SD:\wiiu\apps\...
\coverM\...
\discM\...
\games\... (put your loadiine ready games in here)
\saves\...
6. Put SD card back in WiiU
7. Turn on Apache in XAMPP
8. Test website on local PC by opening a browser (Chrome or another) and go to:
localhost/wiibrew
9. If you cannot see the webpage on your local PC then you may have a port issue with XAMPP. Post
in gbatemp thread with issues. You must have the xampp page working before you can test on Wii U.
10. 10. Learn your local PC's IP address and use that in the next step.
11. Open your Wii U and open the browser. Click on settings in the upper right corner. Click "Reset Save Data". Now browse the webpage:
http://192.168.0.67(replace with your computer IP)/wiibrew
For example, on my Wii U I type this into the address:
http://192.168.11.169/wiibrew
12. You can launch Homebrewbrew launcher or Loadiine. You should only need to click once.
13. If you want to launch any of the other Homebrew then you will need to run the #1 or #2 kexploit first (each app tells you which one to load first).
14. Tap the browser button and go back to your page and then launch any of the apps listed below the kexploits.

*note* If you change the port number in xampp to make it work then you need to include that in the URL
example:
Changed port to "12345". The address I use in Wii U browser is:
http://192.168.11.169:12345/wiibrew

*note2* If you would like to make shortcuts to direct payloads then type this into your bookmark:
http://xxx.xxx.xxx.xxx/(www folder name)/HBL/(payload file)

So in my examples above I would type this into my 5.5.1 Wii U to bookmark for HBL direct loading:
http://192.168.11.169:12345/wiibrew/hbl/index.php

Here are all the payload links:

Direct Homebrew Launcher:
hbl/index.php = 5.5.0 and 5.5.1 users
hbl/540hbl.mp4 = 5.4.0 users
hbl/payload532.html = 5.3.2 users

Direct Loadiine GX2 0.3 launcher:
loadiinegx2/index.php = 5.5.0 and 5.5.1 users
loadiinegx2/540loadiine.mp4 = 5.4.0 users
loadiinegx2/payload532.html = 5.3.2 users

Loadiine Ready Kexploit:
kexploit/loadindex.php = 5.5.0 and 5.5.1 users
kexploit/540kexploit10.mp4 = 5.4.0 users
kexploit/532kex10/payload532.html = 5.3.2 users

NON Loadiine Kexploit:
kexploit/nonindex.php = 5.5.0 and 5.5.1 users
kexploit/540kexploit31.mp4 = 5.4.0 users
kexploit/532kex31/payload532.html = 5.3.2 users

*note3*

If you want to trick your Wii U into loading the same page every time that you open the browser follow these steps:

1. Let's say I want to load the HBL direct launch every time that I open my 5.5.1 Wii U browser. First turn off your server. (or just turn off wifi)
2. Open the browser and type in the direct link for your exploit (in my case "http://192.168.11.169:12345/Wiibrew/HBL/index.php")
3. The page will fail (if you have your webserver off or ethernet disconnected or wifi turned off)
4. Press the Home button
5. Press Wii U Menu
6. Open Mii Maker and let it load.
7. Exit Mii Maker with the button in the bottom left

Now every time you open your browser it will go to that link immediatly. You can cancel this by following the same steps for a different link.

Troubleshooting:

Spoiler

- Make sure to "Reset Save Data" in your Wii U browser settings before trying any of this.
- If you are getting "SD Mount Failed" or any error message about SD card then follow these steps:
a. First make sure that you have formatted your SD to FAT32 using the tool in the instructions
b. Make sure that you are not using a cheap knock off SD card. Many of those don't work.
c. Make sure that you have copied all files inside of folder "SD CARD" to the root of your SD. It should look like this: SD:\wiiu\...
d. If you are having SD errors pop up or your Wii U is not detecting your SD card then get a can of air and blow out the SD card reader on the Wii U. Also use the canned air on the SD contacts in case any dust or debris has gotten on them. DO NOT USE YOUR MOUTH TO BLOW OUT THE SD READER. Saliva can corrode the contacts inside and will only provide a temporary fix with future problems certain.

Changelog:

Spoiler

2/20/27 - Released 2.2 AIO
-Added Mocha CFW booting from web. (use this for non haxchi autobooting)
- Updated HBL to version 1.4
- Added a few extra HBL apps including the App Store
Full https://mega.nz/#!PkgT3BqR!qtpkOWqm3d-BLmuDLX7sOqd29p-9yqnHl1cRKebxTgs
Without PC Software https://mega.nz/#!a4gj1bJL!EJLoWj6hjPpTYC48i68IGbn2D6jMGubN_TCXuViMpQw

8/23/16 Released AIO Self Hosting 2.1
- All 5.3.2 links are now clickable and working
- Added "Updateremover" to 5.3.2 and 5.5.1 menu.


8/17/16 Released AIO Self Hosting 2.0
- All 5.5.1 links working 100% success!
- Cybernatus provided an alternate Loadiine web app with 100% boot rates for 5.5.1


8/17/16 Released AIO Self Hosting 1.7
- Replaced HBL direct launcher with older version from 1.4 package (users are reporting 100% launch success rate with this version)


8/13/16 Release AIO Self Hosting 1.6
- Added Nexocube's modified new AIO kexploit to the 5.5.1 and 5.4.0 menus
- Updated Loadiine GX2 to latest nightly build (16c5045)


6/4/16 Released AIO Self Hosting 1.5
- Updated Homebrew Launcher to 1.2 RC3

5/21/16 Released AIO Self Hosting 1.4
- Removed Dumpiine from all pages (DDD is better)
- Updated instructions
- Added SD Cafiine to all pages
- Added DDD title dumper server gui to "PC Software" folder
- Added SD Cafiine UI to "PC Software" folder
- Added Save-mii (Saviine server gui) to "PC Software" folder
- Updated to Loadiine nightly to 195aaab



5/14/16 Released AIO Self Hosting 1.3
- Added version number in webpage so I can more easily help users in the forum
- replaced all caps letters with lower case and made changes in php files to reflect that for Linux users
- Incorporated @soulhunter 's latest php fixes. Thanks!
- Fixed Saviine icon
- Removed Dumpiine from HBL menu. It hasn't been updated in a while and DDD is better
- Added FTPiiU to HBL menu
- Updated Loadiine GX2 to nightly 1c4b32c.
- Added Saviine server software to "PC Software" folder


5/13/16 Rolled 1.2 RC2 into main package
AIO Self Hosting 1.2 released
- Whole layout has been cleaned up thanks to @soulhunter
- Updated the SD elf files and deleted all unnecessary files
- Updated instructions with three notes at the bottom
- Created additional "PC Software" folder with Xampp and client software for game dumpers
- Updated all 5.3.2 links to point directly to payloads now!


5/12/16 Created main test package 1.2 RC2
- Incorporated @soulhunter 's AngularJs work.
- Directed all 5.3.2 links directly to the payload.html's


5/12/16 Fixed one broken 5.4.0 link in 1.1 RC1. (Link 1 HBL Direct)
Changed 1.1 RC1 to main release version 1.1


5/11/16 Updated main test package to 1.1 RC1
- Created two menu's for 5.5.1 loading. One has PHP links from Cybernatus and the other is simply MP4's
- Replaced the entire 5.4.0 menu with working MP4 links
- Installed elf file for HBL launching of TCPGecko
- Replaced the entire 5.3.2 with html only links


5/11/16 Updated 551 test package to 1.3
- Replaced all test links with php links with help from Cybernatus (loadiine.ovh)


5/10/16 Updated test package to 1.2
- Added links from loadiine.ovh

5/10/16 Fixed typos in the instructions and added version number to main package 1.0
Updated test package to 1.1
- Removed unnecessary html links (they just pointed to the MP4's anyway)

5/10/16 Created 5.5.1 Test package ver 1.0


5/9/16: Updated Loadiine to latest nightly (nightly-e71fb52) - Now supports DCL you own
Moved all 5.4.0 links back to MP4's until I can figure out another way.
Renamed folders from A and B to "www" and "SD Card"
Updated instructions.

5/7/16: Changed all 5.4.0 and 5.5.1 links to php
Changed all 5.3.2 links to html.

Click to expand...

MarioMasta64 said:

does the archive for v2.1 exist. i would like to acquire it if possible.

Click to expand...

nexusmtz said:

http://www.xup.in/dl,86733541/AIO_Self_Hosting_without_PC_software_2.1.zip/

Click to expand...

Madridi said:

I'll post my update to this later. The last released version had some issues. 100% compatibility, but does not support hbl rpx though

Click to expand...

nexusmtz said:

http://www.xup.in/dl,86733541/AIO_Self_Hosting_without_PC_software_2.1.zip/

Click to expand...

Kafluke said:

Thanks for the feedback! I don't know many people that aren't using HaxChi these days so I don't get much feedback on the self host package. I'd be happy to test and report back. I haven't used it in so long I don't even know what works and what doesn't these days

--------------------- MERGED ---------------------------

I know the last time I tested it everything was working great. Maybe clear your internet cache and try again

Click to expand...

Madridi said:

I'll post my update to this later. The last released version had some issues. 100% compatibility, but does not support hbl rpx though

Click to expand...

MarioMasta64 said:

behold the fruits of labor http://old-school-gamer.tk/WiiU-Hax/ (its almost as complete as loadiine.ovh now )

--------------------- MERGED ---------------------------


i heard if you just replace the mp4 files from last release with latest you can launch rpx ;P (but all the guides use the .elf so it doesnt matter much )

Click to expand...

Madridi said:

There are ones that launch rpx, it's just buggy, not 100% compatible. I don't use rpx anyway nor do I see a purpose for them so I just use the 100% boot ones for the .elf

Click to expand...

Kafluke said:

Yeah. I never updated it for 5.5.2. Kind of abandoned this when HaxChi came out

Click to expand...

Kafluke said:

Sure. It's already in the package but I haven't ever updated it for firmware 5.5.2

Click to expand...

schooluser said:

Ok, I've got it all installed and can see it on the webpage, I can edit the HTML, what files would I need to add for 5.5.2?

Click to expand...