Well it's as the titles says, this has been in development for quite a while now(those who follow me on twitter would know)
The board is called Vita module expansion board , V-MEB for short and is used as more than an SD card adapter.
I've basically designed a board that takes advantage of almost everything the slot has to offer and here are the features:
*SD board that replaces SIM slot and is connected via ribbon cable to the SD adapter.
*Onboard UART to USB ICs(For those too lazy to wire up their adapter)
*Board switches to USB port when SD card is not present(Yeah use your USB devices when you want)
*Direct transfer(inbuilt data switching circuit, just turn off your console and plug it into your PC)
The key features are:
*Easy access SD slot where you would put your SIM card in.
*SD access LED.
*Direct transfer without need of any special software.
*UART to USB built in(Handy for devs)
Those are the features but the here are the specs:
*USB2642 IC(Handles SD card and USB)
*EEPROM IC(A program is loaded to toggle between USB and SD when SD isn't present)
*CP2104 IC(UART-USB IC that has a inbuilt clock crystal for space efficiency)
*SN74CB3Q3125 IC(Allows changing what the board is connected to, this helps with direct transfer)
There are some more specs but I won't be releasing them right now as they are subject to change.
I will have some prototypes made very soon and sent out to certain people to review and provide feed back.
The card will come boxed in a black box and will contain the following:
*12-Pin MicroJST port(for those who want to use the UART feature)
*12-Pin MicroJST cable split into 3 USB males(A cable to easily hookup to UART via the port)
*MicroUSB port(For direct transfer)
*USB port(For those who want to use USB storage when they don't have a SD card in)
*SD board(Replaces the board that is used for the SIM which allows easy access to SD slot)
*SD Flex(Just the cables that goes straight from the SD board to the main board)
*V-MEB board(Vita module expansion board, this is the main board with all the goodies)
*MicroUSB cable(For direct transfer)
*Authentication card(Hey you don't want to end up with a fake board that may contain dodgy code)
*Installation manual(Even though the install is easy a manual doesn't hurt)
If anyone is interested and wants to keep updates follow me on twitter as that's where I post most my work.
The board is called Vita module expansion board , V-MEB for short and is used as more than an SD card adapter.
I've basically designed a board that takes advantage of almost everything the slot has to offer and here are the features:
*SD board that replaces SIM slot and is connected via ribbon cable to the SD adapter.
*Onboard UART to USB ICs(For those too lazy to wire up their adapter)
*Board switches to USB port when SD card is not present(Yeah use your USB devices when you want)
*Direct transfer(inbuilt data switching circuit, just turn off your console and plug it into your PC)
The key features are:
*Easy access SD slot where you would put your SIM card in.
*SD access LED.
*Direct transfer without need of any special software.
*UART to USB built in(Handy for devs)
Those are the features but the here are the specs:
*USB2642 IC(Handles SD card and USB)
*EEPROM IC(A program is loaded to toggle between USB and SD when SD isn't present)
*CP2104 IC(UART-USB IC that has a inbuilt clock crystal for space efficiency)
*SN74CB3Q3125 IC(Allows changing what the board is connected to, this helps with direct transfer)
There are some more specs but I won't be releasing them right now as they are subject to change.
I will have some prototypes made very soon and sent out to certain people to review and provide feed back.
The card will come boxed in a black box and will contain the following:
*12-Pin MicroJST port(for those who want to use the UART feature)
*12-Pin MicroJST cable split into 3 USB males(A cable to easily hookup to UART via the port)
*MicroUSB port(For direct transfer)
*USB port(For those who want to use USB storage when they don't have a SD card in)
*SD board(Replaces the board that is used for the SIM which allows easy access to SD slot)
*SD Flex(Just the cables that goes straight from the SD board to the main board)
*V-MEB board(Vita module expansion board, this is the main board with all the goodies)
*MicroUSB cable(For direct transfer)
*Authentication card(Hey you don't want to end up with a fake board that may contain dodgy code)
*Installation manual(Even though the install is easy a manual doesn't hurt)
If anyone is interested and wants to keep updates follow me on twitter as that's where I post most my work.
Last edited by TariqSoftDev,