Hacking HELP!! Turn CFW to OFW

Tomy Sakazaki

Well-Known Member
Member
Joined
Oct 23, 2006
Messages
880
Trophies
0
Website
Visit site
XP
812
Country
Brazil
One thing that I didn't see to be considered. His console have A9LH, but the region changed firmware is in his sysnand or it's a emunand? Can someone try to walk OP into checking it? Essentially, prepare another SD card with luma and trying to boot it directly. If the region change was performed in emunand only it may be easy to re-prepare the console.
 

Martin_Sean

Member
OP
Newcomer
Joined
Jan 23, 2017
Messages
18
Trophies
0
Age
26
XP
76
Country
Indonesia
DO A BACKUP OF FILES IN YOUR SD CARD.
I don't know what is installed in that 3DS, but if you need the OTP file from the SD card, you MUST have a backup.

NNID is Nintendo Network ID.

Try going into the settings and deleting your eShop account or NNID.

PS: Does your 3DS boot without an SD card plugged in?
no unfortunately, it will not boot up without it. btw I think I don't need to delete the account since I don't have any though..
 

sarkwalvein

There's hope for a Xenosaga port.
Member
Joined
Jun 29, 2007
Messages
8,506
Trophies
2
Age
41
Location
Niedersachsen
XP
11,219
Country
Germany
no unfortunately, it will not boot up without it. btw I think I don't need to delete the account since I don't have any though..
For some reason a JPN NNID must be assigned to the system.
Because of that you should either format the system or delete the NNID account.
Both things can be done from the settings menu of the 3DS.
But before that, make that BACKUP, you don't need to backup the 3DS folder, but do backup everything else on the SD card, specially A9LH, arm9loaderhax, etc.
 

Martin_Sean

Member
OP
Newcomer
Joined
Jan 23, 2017
Messages
18
Trophies
0
Age
26
XP
76
Country
Indonesia
For some reason a JPN NNID must be assigned to the system.
Because of that you should either format the system or delete the NNID account.
Both things can be done from the settings menu of the 3DS.
But before that, make that BACKUP, you don't need to backup the 3DS folder, but do backup everything else on the SD card, specially A9LH, arm9loaderhax, etc.
I go to the NNID settings and it said that I need to create a new ID?
 

HyperT

Well-Known Member
Member
Joined
Jun 4, 2016
Messages
674
Trophies
0
XP
232
Country
Except then you'll have a Japanese region console again. Hope you can read kata/kanji. If not, I'd suggest leaving it the way it is. There is an alternative "open source eshop" called freeshop. You can find it here on this site. Unfortunately, rules here prevent me from teaching you how to set it up, so you're gonna have to do some googling. If you'd like, you can also join the discord channel in my signature. I can help you more there without restriction.
How does section iv change it back to Jap?

What seems to have happened here is someone Region Changed but stopped after section 3. Section 4 changes the SecureInfo_A to the new region - which should fix the problems here.

@Martin_Sean try that section iv - it makes a copy of SI_A as SI_C with the correct region. Luma3DS - the 'cfw' will use the _C one if it's there.
 
Last edited by HyperT,

Martin_Sean

Member
OP
Newcomer
Joined
Jan 23, 2017
Messages
18
Trophies
0
Age
26
XP
76
Country
Indonesia
How does section iv change it back to Jap?

What seems to have happened here is someone Region Changed but stopped after section 3. Section 4 changes the SecureInfo_A to the new region - which should fix the problems here.

@Martin_Sean try that section iv - it makes a copy of SI_A as SI_C with the correct region. Luma3DS - the 'cfw' will use the _C one if it's there.
i'll try all the things above, and thank you all for help guys! seriously appreciate it!!
 

gamesquest1

Nabnut
Former Staff
Joined
Sep 23, 2013
Messages
15,153
Trophies
2
XP
12,247
unless you have Japanese games uninstalling a9lh would serve no purpose, seeing as your original intention seemed to be able to get game updates from the eshop, uninstalling a9lh would mean you could aaccess the eshop, but only the Japanese eshop and you can only get Japanese updates from the Japanese eshop (with the exception of region free games, which AFAIK is only the pokemon games)

ps the region change was already properly completed otherwise the system wouldn't be booting
 

DocKlokMan

Plugin Dev
Member
Joined
Apr 20, 2007
Messages
3,008
Trophies
2
Age
36
XP
4,570
Country
United States
To clarify:
  1. The console is a JPN system region swapped to USA via CFW. If you remove CFW without putting it back to JPN the 3DS will no longer boot, so don't do that yet.
  2. If you want to use your US eShop account, you'll need to keep CFW and keep it on US region.
  3. The first thing you should do before changing or mucking around with anything is make a backup of the 3DS. You can do this thanks to CFW. Please check the SD card for a folder called SD:\luma\payloads\ and tell us what's inside it and we can help you back the 3DS up and then we'll be safe doing any changes to get it working.
 
  • Like
Reactions: HyperT

sarkwalvein

There's hope for a Xenosaga port.
Member
Joined
Jun 29, 2007
Messages
8,506
Trophies
2
Age
41
Location
Niedersachsen
XP
11,219
Country
Germany
The problem with this console is that whoever did the region swap forgot to delete the eShop account at the beginning of the procedure.
For this reason the console is still linked to the JPN eshop and fails to log in.
The only solution I see to it is region swapping back to JPN, deleting the eShop account and then swapping back to US.
I think this is a dangerous and cumbersome procedure, and I'm not sure it is justified.
It should start by making a NAND backup anyway.
 

HyperT

Well-Known Member
Member
Joined
Jun 4, 2016
Messages
674
Trophies
0
XP
232
Country
To clarify:
  1. The console is a JPN system region swapped to USA via CFW. If you remove CFW without putting it back to JPN the 3DS will no longer boot, so don't do that yet.
  2. If you want to use your US eShop account, you'll need to keep CFW and keep it on US region.
  3. The first thing you should do before changing or mucking around with anything is make a backup of the 3DS. You can do this thanks to CFW. Please check the SD card for a folder called SD:\luma\payloads\ and tell us what's inside it and we can help you back the 3DS up and then we'll be safe doing any changes to get it working.
Not sure of why you think it wouldn't boot without cfw [if by cfw you mean a9lh&luma3ds]. I'm pretty sure it would boot fine - looking for official sources on that though.

Totally agree on #3 though - and a look at luma3ds's config
 

gamesquest1

Nabnut
Former Staff
Joined
Sep 23, 2013
Messages
15,153
Trophies
2
XP
12,247
unless I missed something the eshop virtually never actually worked for region changed consoles with the exception of brand new systems that had never connected to the Internet, so even if he did go through all the region changing stuff, removed the nnid and re-region changed he still wouldn't get eshop access
 

Arubaro

Soulspace Guardian
Member
Joined
Sep 4, 2015
Messages
1,669
Trophies
0
Age
32
XP
586
Country
Does install system titles break signatures? Or do they count as "legit" like the legit cias?
 

HyperT

Well-Known Member
Member
Joined
Jun 4, 2016
Messages
674
Trophies
0
XP
232
Country
unless I missed something the eshop virtually never actually worked for region changed consoles with the exception of brand new systems that had never connected to the Internet, so even if he did go through all the region changing stuff, removed the nnid and re-region changed he still wouldn't get eshop access
The o3ds eshop is fine after changing, what you said is true about the n3ds
 

sarkwalvein

There's hope for a Xenosaga port.
Member
Joined
Jun 29, 2007
Messages
8,506
Trophies
2
Age
41
Location
Niedersachsen
XP
11,219
Country
Germany
unless I missed something the eshop virtually never actually worked for region changed consoles with the exception of brand new systems that had never connected to the Internet, so even if he did go through all the region changing stuff, removed the nnid and re-region changed he still wouldn't get eshop access
AFAIK it works for old 3DS if you delete the eShop account before swapping.
It doesn't work for new 3DS.
This is as stated here.
 

gamesquest1

Nabnut
Former Staff
Joined
Sep 23, 2013
Messages
15,153
Trophies
2
XP
12,247
hmm strange, I guess I was following the process way back when people were buying jpn n3ds consoles to get hackable fw's or small n3ds consoles before they were released in US

*insert "the more you know" meme here*

I wonder if he could just install the Japanese system settings and do a system format from there (just wondering if it's the system settings app itself that defines which sever it send's the unlink NNID request to)
 
Last edited by gamesquest1,

DocKlokMan

Plugin Dev
Member
Joined
Apr 20, 2007
Messages
3,008
Trophies
2
Age
36
XP
4,570
Country
United States
unless I missed something the eshop virtually never actually worked for region changed consoles with the exception of brand new systems that had never connected to the Internet, so even if he did go through all the region changing stuff, removed the nnid and re-region changed he still wouldn't get eshop access

The o3ds eshop is fine after changing, what you said is true about the n3ds

AFAIK it works for old 3DS if you delete the eShop account before swapping.
It doesn't work for new 3DS.
This is as stated here.
There may be a work around for this stated here: https://github.com/Plailect/Guide/issues/798

--------------------- MERGED ---------------------------

Not sure of why you think it wouldn't boot without cfw [if by cfw you mean a9lh&luma3ds]. I'm pretty sure it would boot fine - looking for official sources on that though.

Totally agree on #3 though - and a look at luma3ds's config
Because you flash a CTRnand from a different region which I assume would clash with the info in SecureInfo_A and prevent a stock system from booting. If this is not true I'd like an explanation on how it doesn't break things to have a different regions CTRnand installed.
 

gamesquest1

Nabnut
Former Staff
Joined
Sep 23, 2013
Messages
15,153
Trophies
2
XP
12,247
There may be a work around for this stated here: https://github.com/Plailect/Guide/issues/798

--------------------- MERGED ---------------------------


Because you flash a CTRnand from a different region which I assume would clash with the info in SecureInfo_A and prevent a stock system from booting. If this is not true I'd like an explanation on how it doesn't break things to have a different regions CTRnand installed.
afaik ctrtransfer detects if the ctrtransfer image is the incorrect region, if it doesn't match it will automatically replace it with a donor SI_a that matches the new region

oh and that workaround seems to depend on having 2 systems of the original region to system transfer, it seems like upon doing a system transfer the source console is left completely fresh like a brand new system that has never accessed the eshop so then it's free to join a new region
 
Last edited by gamesquest1,

HyperT

Well-Known Member
Member
Joined
Jun 4, 2016
Messages
674
Trophies
0
XP
232
Country
There may be a work around for this stated here: https://github.com/Plailect/Guide/issues/798

--------------------- MERGED ---------------------------


Because you flash a CTRnand from a different region which I assume would clash with the info in SecureInfo_A and prevent a stock system from booting. If this is not true I'd like an explanation on how it doesn't break things to have a different regions CTRnand installed.
I don't think it's a system vital file though. In that, some things won't work but it'll still boot, with the mismatch - still looking for sources on that though

Edit I stand corrected then
 
Last edited by HyperT,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Psionic Roshambo @ Psionic Roshambo: https://www.youtube.com/watch?v=gYzI76fwaM0