Homebrew [WIP] PKMN NTR - Pokémon Gen 6 Memory Editor

dotarice · Oct 27, 2016

@drgoku282

is there a way to (or may you) separate the bot features onto a new window / application on your next releases?

proflayton123 · Oct 27, 2016

Thank you for updates on breeding bot

Sent from my iPhone using Tapatalk

Rick Astley · Oct 27, 2016

well, i'm sure at 90% it's not related but well... I've continued to SR Reshiram and I did 400 SR with full Battery.
I wanted to reset with low battery (O3DS), crash at the 9th SR. Restarted. Crash at the 7th SR.
So 2 crash in 15 SR with low battery.

I know there's nothing that can be done, and I don't care to be honnest because I'm always checking my 3DS, but just if this can help people to avoid this o7

RustInPeace · Oct 27, 2016

Is the event bot ORAS only? Trying it on X, and it does the first necessary reset, collects the pokemon, data is dumped, but no soft reset.

drgoku282 · Oct 28, 2016

First preview of the Breeding bot is up: https://github.com/drgoku282/PKMN-NTR/releases/tag/1.18.7-beta1

TL;DR from the wiki and warning message: This is the simple mode, just produces a set amount of eggs and leaves them on PC. Only working on Route 117 Day Care in ORAS. Start in front of the Day Care man after depositing the parents to start and make sure you only have one pokémon in your party. Very slim chance to break due wi-fi lag in precise movement, might, for example, do two steps instead of one.

dotarice said:
is there a way to (or may you) separate the bot features onto a new window / application on your next releases?

The GUI was changed a little in this release, now the Bots and the Edit trainer share the same space, but are on different tabs.

Rick Astley said:
well, i'm sure at 90% it's not related but well... I've continued to SR Reshiram and I did 400 SR with full Battery.
I wanted to reset with low battery (O3DS), crash at the 9th SR. Restarted. Crash at the 7th SR.
So 2 crash in 15 SR with low battery.

I know there's nothing that can be done, and I don't care to be honnest because I'm always checking my 3DS, but just if this can help people to avoid this o7

It could be related, maybe when the 3DS is low on battery it provides less power to the Wi-Fi module, increasing the possibilities of errors.

RustInPeace said:
Is the event bot ORAS only? Trying it on X, and it does the first necessary reset, collects the pokemon, data is dumped, but no soft reset.

Working fine in my end, try latest version and tell me if the problem persists.

RustInPeace · Oct 28, 2016

drgoku282 said:
Working fine in my end, try latest version and tell me if the problem persists.

Still happening, no presses once the message "We hope to see you again" or whatever it is comes up. Log info.

Bot start
Test if the PSS menu is shown
packet: cmd = 9, dataLen = 4
finished
Fix Wi-Fi
finished
Touch PSS settings
finished
finished
Test if the PSS setings are shown
packet: cmd = 9, dataLen = 4
finished
Touch Disable PSS communication
finished
finished
Test if PSS disable confirmation appears
packet: cmd = 9, dataLen = 4
finished
Touch Yes
finished
finished
Test if back to PSS screen
packet: cmd = 9, dataLen = 4
finished
Return contol to character
finished
finished
Touch Save button
finished
finished
Test if the save screen is shown
packet: cmd = 9, dataLen = 4
finished
Press Yes
finished
finished
Test if out from save screen
packet: cmd = 9, dataLen = 4
finished
Soft-reset for party data intialize
Sof-reset #0
finishedpatching smdh
starting app: 0004000000055d00
FSUSER_OpenDirectory failed, ret=c8804478
finishedpatching smdh
patching smdh
Skip intro cutscene
finished
finished
Start game
finished
finished
Reconnect
Unable to read data from the transport connection: A blocking operation was interrupted by a call to WSACancelBlockingCall.
Server disconnected.
Server connected.
rtRecvSocket failed: 00000000pid: 0x00000000, pname: fs, tid: 0000000000000000, kpobj: fff75820
pid: 0x00000001, pname: loader, tid: 0000000000000000, kpobj: fff75a88
pid: 0x00000002, pname: pm, tid: 0000000000000000, kpobj: fff75cf0
pid: 0x00000003, pname: sm, tid: 0000000000000000, kpobj: fff75f58
pid: 0x00000004, pname: pxi, tid: 0000000000000000, kpobj: fff761c0
pid: 0x00000005, pname: ns, tid: 0004013000008002, kpobj: fff76428
pid: 0x00000006, pname: ptm, tid: 0004013000002202, kpobj: fff76690
pid: 0x00000007, pname: cfg, tid: 0004013000001702, kpobj: fff768f8
pid: 0x00000008, pname: gpio, tid: 0004013000001b02, kpobj: fff76b60
pid: 0x00000009, pname: i2c, tid: 0004013000001e02, kpobj: fff76dc8
pid: 0x0000000a, pname: mcu, tid: 0004013000001f02, kpobj: fff77030
pid: 0x0000000b, pname: pdn, tid: 0004013000002102, kpobj: fff77298
pid: 0x0000000c, pname: spi, tid: 0004013000002302, kpobj: fff77500
pid: 0x0000000d, pname: ps, tid: 0004013000003102, kpobj: fff77768
pid: 0x0000000e, pname: ErrDisp, tid: 0004003000008a02, kpobj: fff779d0
pid: 0x0000000f, pname: menu, tid: 0004003000008f02, kpobj: fff77c38
pid: 0x00000010, pname: hid, tid: 0004013000001d02, kpobj: fff77ea0
pid: 0x00000011, pname: codec, tid: 0004013000001802, kpobj: fff78108
pid: 0x00000012, pname: dsp, tid: 0004013000001a02, kpobj: fff78370
pid: 0x00000013, pname: am, tid: 0004013000001502, kpobj: fff785d8
pid: 0x00000014, pname: gsp, tid: 0004013000001c02, kpobj: fff78840
pid: 0x00000015, pname: csnd, tid: 0004013000002702, kpobj: fff78aa8
pid: 0x00000016, pname: camera, tid: 0004013000001602, kpobj: fff78d10
pid: 0x00000017, pname: mic, tid: 0004013000002002, kpobj: fff78f78
pid: 0x00000018, pname: ir, tid: 0004013000003302, kpobj: fff791e0
pid: 0x00000019, pname: nwm, tid: 0004013000002d02, kpobj: fff79448
pid: 0x0000001a, pname: socket, tid: 0004013000002e02, kpobj: fff796b0
pid: 0x0000001b, pname: http, tid: 0004013000002902, kpobj: fff79918
pid: 0x0000001c, pname: ssl, tid: 0004013000002f02, kpobj: fff79b80
pid: 0x0000001d, pname: cecd, tid: 0004013000002602, kpobj: fff79de8
pid: 0x0000001e, pname: friends, tid: 0004013000003202, kpobj: fff7a050
pid: 0x0000001f, pname: ac, tid: 0004013000002402, kpobj: fff7a2b8
pid: 0x00000020, pname: boss, tid: 0004013000003402, kpobj: fff7a520
pid: 0x00000021, pname: act, tid: 0004013000003802, kpobj: fff7a788
pid: 0x00000022, pname: news, tid: 0004013000003502, kpobj: fff7a9f0
pid: 0x00000023, pname: ndm, tid: 0004013000002b02, kpobj: fff7ac58
pid: 0x00000024, pname: nim, tid: 0004013000002c02, kpobj: fff7aec0
pid: 0x00000025, pname: dlp, tid: 0004013000002802, kpobj: fff7b128
pid: 0x0000002c, pname: kujira-1, tid: 0004000000055d00, kpobj: fff7b390
pid: 0x0000002d, pname: ro, tid: 0004013000003702, kpobj: fff7b5f8
end of process list.
packet: cmd = 9, dataLen = 4
packet: cmd = 9, dataLen = 2
packet: cmd = 9, dataLen = 2
packet: cmd = 9, dataLen = 24
packet: cmd = 9, dataLen = 4
packet: cmd = 9, dataLen = 4
packet: cmd = 9, dataLen = 4
packet: cmd = 9, dataLen = 1
packet: cmd = 9, dataLen = 2960
finishedfinishedfinishedfinishedfinishedfinishedfinishedfinishedfinished
Talk to lady
finished
finished
Continue dialog (Good day!...
finished
finished
Continue dialog (I've got a...
finished
finished
Wait for fanfare
finished
finished
Exit dialog
finished
finished
Try to read party
packet: cmd = 9, dataLen = 260
finished
Analyze pokémon
Shiny: Yes
Bot stop

It's the Shiny Yveltal.

dotarice · Oct 28, 2016

drgoku282 said:
The GUI was changed a little in this release, now the Bots and the Edit trainer share the same space, but are on different tabs.

oh i was meaning this because an anonymous source has been wanting to use it but the other features of the pkmn.ntr is discouraging them. maybe except the slot deletion.

i have tried the breeding bot and i could not get it to work. i (only) set the mode to simple and attempted to start it. while the following text appears:

Bot start
Run in direction 1
finished
Check if egg
packet: cmd = 9, dataLen = 4
finished
Run in direction 2
finished
Check if egg
packet: cmd = 9, dataLen = 4
finished

nothing happens on my 3ds. new 3ds ll (japan) a9lh luma 11.1.0-34

edit: i am facing the day care man in which i am between the sign.

drgoku282 · Oct 28, 2016

RustInPeace said:
Still happening, no presses once the message "We hope to see you again" or whatever it is comes up. Log info. It's the Shiny Yveltal.

The bot stops because the pokémon it encounters is a shiny, like the mirage spot pokémon, I will disable this check for events on next release. Meanwhile, check the Shiny box to force the bot to read the other filters.

@dotarice: I would like to conserve all existing features since all of them depend on NTR, so it's not in plans. A standalone application would be easy to fork from my repository. Also on the breeding bot, I need to know which game are you using and which daycare (if playing in ORAS). Also I'd recommend to just write your messages normally because most people use quotes to respond to other messages to keep things on context.

dotarice · Oct 28, 2016

@drgoku282

don't worry about that; even if you did quoted me and no message is seen, i would still get a notice that they did. the same goes when mentioning a username. it is only due to the xenforo's setting where the previously quoted messages (upon a quoted post) are not seen and sometimes it confuses me on whom is replying to whom.

i am using the omega ruby version and is in the day care in route 117 as you instructed us to do.

drgoku282 · Oct 28, 2016

What happens on screen?

dotarice · Oct 28, 2016

nothing, of course.

drgoku282 · Oct 28, 2016

@dotarice: Did you activate InputRedireciton in your 3DS, also, you're in the wrong spot, see the wiki.

dotarice · Oct 28, 2016

@drgoku282

that i did not see. i only saw "you must face the day care man" and did not see specifically where to stand at.

thank you very much. it works now. i will come back with results soon.

RustInPeace · Oct 28, 2016

Out of curiosity, in the wiki, what does this mean? "Also check your items and lead pokémon before starting."

Breeding bot works very well, 60 eggs, did its job.

drgoku282 · Oct 28, 2016

RustInPeace said:
Out of curiosity, in the wiki, what does this mean? "Also check your items and lead pokémon before starting."

That you're ready for the battle, have enough pokéballs and your catcher pokémon.

New beta version is up: https://github.com/drgoku282/PKMN-NTR/releases/tag/1.18.7-beta2

This changes the GUI a little more and adds support for Battle Resort day care. Next is XY daycare.

hacksn5s4 · Oct 28, 2016

drgoku282 said:
First preview of the Breeding bot is up: https://github.com/drgoku282/PKMN-NTR/releases/tag/1.18.7-beta1

TL;DR from the wiki and warning message: This is the simple mode, just produces a set amount of eggs and leaves them on PC. Only working on Route 117 Day Care in ORAS. Start in front of the Day Care man after depositing the parents to start and make sure you only have one pokémon in your party. Very slim chance to break due wi-fi lag in precise movement, might, for example, do two steps instead of one.

The GUI was changed a little in this release, now the Bots and the Edit trainer share the same space, but are on different tabs.

It could be related, maybe when the 3DS is low on battery it provides less power to the Wi-Fi module, increasing the possibilities of errors.

Working fine in my end, try latest version and tell me if the problem persists.

i have an idea for a soultion to input lag if an input fails it simply sends it again untill it works or you can make the bot fix its self up with screen dection if some thing like that happens

drgoku282 said:
That you're ready for the battle, have enough pokéballs and your catcher pokémon.

New beta version is up: https://github.com/drgoku282/PKMN-NTR/releases/tag/1.18.7-beta2

This changes the GUI a little more and adds support for Battle Resort day care. Next is XY daycare.

will you make it use the bike since it would be faster

drgoku282 · Oct 28, 2016

hacksn5s4 said:
i have an idea for a soultion to input lag if an input fails it simply sends it again untill it works or you can make the bot fix its self up with screen dection if some thing like that happens

The bot already does that, when an input fails it reads the screen and goes back if the input was not registered, the problem is excessive lag, currently it can wait up to 10 seconds for a response.

hacksn5s4 · Oct 28, 2016

you

drgoku282 said:
The bot already does that, when an input fails it reads the screen and goes back if the input was not registered, the problem is excessive lag, currently it can wait up to 10 seconds for a response.

you could just disable the time out to fix that and will egg hatching be added you would just detect when it says oh and just have it relase all the mons with bad stats and only keep shiyns and good stats

drgoku282 · Oct 28, 2016

hacksn5s4 said:
will you make it use the bike since it would be faster

After testing not really, when the character is running it performs a test to check if an egg is available, the time that the test takes it's enough to make the character run the entire up/down distance most of the time, with the bike, you'll have larger dead times. Also the bike messes up with map coordinates, because you can end in middle of two spaces. I can dismount and walk to fix this, but that need additional tests, in the long run, it makes the bike actually slower since I'm moving short distances.

hacksn5s4 said:
you could just disable the time out to fix that and will egg hatching be added you would just detect when it says oh

It's not a good idea, because the bot could just loop forever between two states with no warning to the user. Also that kind of errors doesn't happen often anymore, the most common error is the black screen issue, which is not related to touch/button errors.

Homebrew [WIP] PKMN NTR - Pokémon Gen 6 Memory Editor

Well-Known Member

Well-Known Member

The Temp Loaf'

The real one !

Samurai Cop

Well-Known Member

Samurai Cop

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Samurai Cop

Well-Known Member

Banned!

Well-Known Member

Banned!

Well-Known Member

Similar threads

Popular threads in this forum