Hacking 9.2 Upgrade for Plailetcs

yossii · Jul 22, 2016

Hi Just starting to do the Plailetcs guide.
I need to upgrade to 9.2 first and am on step 10 of the upgrade guide using RXtools.
https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)
I have on old 3ds with 4.5.0-8E I get to step 10 and try the Health and Safety Dump.
I get the message: APP0 not found or fragmented. It fails the dump.
Any help most gratefully appreciated!

Davidosky99 · Jul 22, 2016

yossii said:
Hi Just starting to do the Plailetcs guide.
I need to upgrade to 9.2 first and am on step 10 of the upgrade guide using RXtools.
https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)
I have on old 3ds with 4.5.0-8E I get to step 10 and try the Health and Safety Dump.
I get the message: APP0 not found or fragmented. It fails the dump.
Any help most gratefully appreciated!

You did your FBI injection with FBI right?
You might be a bit unlucky now

"Validation Stage 1: SUCCESS" and "Validation Stage 2: FAILED"
This will happen due to having a fragmented NAND (caused by various things such as rxTools' shitty FBI injection or some Gateway software). OTPHelper cannot check the files of a fragmented NAND, but if you got "Validation Stage 1: SUCCESS" then "Validation Stage 2: FAILED" will rarely be an anything but a false positive.

You can either flash to SysNAND at your own risk, or attempt to defragment your NAND by using Decrypt9 to dump your CTRNAND partition, then mounting it on your computer using something like OSFMount and defragging that mounted CTRNAND using something like Defraggler.
https://github.com/Plailect/Guide/wiki/Troubleshooting

yossii · Jul 22, 2016

No I am at the stage I am at Ive not had to use the FBI yet.
(Stage 10)
Should I have a cartridge in the 3ds or not?
Sorry to be a pest

Davidosky99 · Jul 22, 2016

yossii said:
No I am at the stage I am at Ive not had to use the FBI yet.
(Stage 10)
Should I have a cartridge in the 3ds or not?
Sorry to be a pest

Have you ever injected FBI using rxtools?
Try doing a system format if you haven't injected first

yossii · Jul 22, 2016

Nope never injected FBI using RXtools.Do I need to?
I've done a system format before I started the procedure as it seemed sensible.

Davidosky99 · Jul 22, 2016

yossii said:
Nope never injected FBI using RXtools.
I've done a system format before I started the procedure as it seemed sensible.

You can try rebooting the console and trying again.
Tho, I find it very weird that you got this error without a rxtools FBI injection

yossii · Jul 22, 2016

Just tried again here is a dump for the error log if that is any help:

Initializing SD card... success
sector0x96 Key: otp.bin not found
0x03 KeyX & KeyY: already set up
0x25 KeyX: already set up
0x18 KeyX: not found
0x1B KeyX: not found
Finalizing Initialization...

Initialization: partially failed

Searching title "Health&Safety"...
Method 1: Search in title.db...
Found title 0004001000022300
TMD0 found at 15CCC000, size 2868b
APP0 not found or fragmented!
Health&Safety Dump: failed!

Press B to return, START to reboot.

Does this help?

Davidosky99 · Jul 22, 2016

Well, if it keeps failing you can try injecting FBI from rxtools itself(I wouldn't recommend this unless I would see this wouldn't work any way else, and I'm not sure you can use another console's hs.app) . on 9.2 you might have more luck dumping it and injecting a newer FBI.

yossii · Jul 22, 2016

Thanks for your time buddy!
I think my skill set probably calls for a Sky3DS+....

Davidosky99 · Jul 22, 2016

yossii said:
Thanks for your time buddy!
I think my skill set probably calls for a Sky3DS+....

Don't get it, really!
Follow plailect's guide until the end.
Arm9loaderhax+luma3ds does pay off!

yossii · Jul 22, 2016

I was/am a but nervous about doing the Plailect guide.
Perhaps simple is better

Thanks fella super grateful for your time and help.

Davidosky99 · Jul 22, 2016

yossii said:
I was/am a but nervous about doing the Plailect guide.
Perhaps simple is better
Thanks fella super grateful for your time and help.

The product is not worth it, really, don't go with it.
But the money you blew is yours, so it's your choice

ZeastTheMiiverseHacker · Jul 22, 2016

My friend PF2M took 100+ tries to downgrade. I would assume it's the same for upgrading too.

yossii · Jul 29, 2016

I've come back for another shot at this.
Would formatting my emunand before I start help? I can do this using my old Gateway kit?

grafate · Jul 29, 2016

yossii said:
I've come back for another shot at this.
Would formatting my emunand before I start help? I can do this using my old Gateway kit?

If you have a fresh SD to use go and format that fresh SD fat 32 with the largest cluster size available. Then try again and see if it works for you this time.

yossii · Jul 29, 2016

Cool thanks Ill give that a go and report back!

yossii · Jul 29, 2016

Nope no joy

Fresh SD card.
Formatted the SD card (System Settings, Other Settings, Format System Memory)
Re downloaded the files and put them on (only the files specified from the webpage) followed the instructions:
Still getting:

Searching title "Health&Safety"...
Method 1: Search in title.db...
Found title 0004001000022300
TMD0 found at 15CCC000, size 2868b
APP0 not found or fragmented!
Health&Safety Dump: failed!

Any ideas most gratefully received!

grafate · Jul 30, 2016

yossii said:
Nope no joy
Fresh SD card.
Formatted the SD card (System Settings, Other Settings, Format System Memory)
Re downloaded the files and put them on (only the files specified from the webpage) followed the instructions:
Still getting:

Searching title "Health&Safety"...
Method 1: Search in title.db...
Found title 0004001000022300
TMD0 found at 15CCC000, size 2868b
APP0 not found or fragmented!
Health&Safety Dump: failed!

Any ideas most gratefully received!

Sorry I should of been more clear then. You format the SD card in your PC. The system format in 3DS settings only resets the folder on the SD.

yossii · Jul 30, 2016

No that's what I did I re formatted to fat32 making sure I used the largest amount of cluster size. Copied the required files to the ad card.
I then formatted the 3DS.
Then I tried the decrypt9. Same problem

Ive even just gone out and gotten a new memory card to see if that made a difference!

Dvdxploitr · Jul 31, 2016

It took me about 20-30 times to upgrade on my Old 3DS...worked 2nd or 3rd time on my New 3DS....

Hacking 9.2 Upgrade for Plailetcs

Member

Eevee :3

Member

Eevee :3

Member

Eevee :3

Member

Eevee :3

Member

Eevee :3

Member

Eevee :3

Member

Member

Well-Known Member

Member

Member

Well-Known Member

Member

Well-Known Member

Similar threads

Popular threads in this forum