Hacking 3DS NOOB PARADISE - Ask questions here

  • Thread starter Cyan
  • Start date
  • Views 4,392,467
  • Replies 53,717
  • Likes 43

chesnaughty

New Member
Newbie
Joined
Jul 25, 2016
Messages
2
Trophies
0
Age
36
XP
52
Country
Don't update to 9.4! Update to 9.2 and use CFW. You can update by software, see https://github.com/Plailect/Guide/wiki/9.2.0-Update
Yeah, I read about that earlier and considered it but I read somewhere that there's a chance that the console may be bricked. Since I'm just going to use my 2ds for pokemon cloning and the like, I'm not open to such risk however minimal.

And that is why I intend to go the safe route which is updating through cartridges. Any idea as whether all Codename STEAM cartridges update the firmware to 9.4?
 

ihaveahax

Well-Known Member
Member
Joined
Apr 20, 2015
Messages
6,069
Trophies
2
XP
7,805
Country
United States
Yeah, I read about that earlier and considered it but I read somewhere that there's a chance that the console may be bricked. Since I'm just going to use my 2ds for pokemon cloning and the like, I'm not open to such risk however minimal.

And that is why I intend to go the safe route which is updating through cartridges. Any idea as whether all Codename STEAM cartridges update the firmware to 9.4?
the chance of a brick is very low if you pay attention to the instructions and what you're doing. don't do a cart update since it won't update the browser, unless it's necessary in getting to 9.2.0-20. this is the best option you should take.
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
Yeah, I read about that earlier and considered it but I read somewhere that there's a chance that the console may be bricked. Since I'm just going to use my 2ds for pokemon cloning and the like, I'm not open to such risk however minimal.

And that is why I intend to go the safe route which is updating through cartridges. Any idea as whether all Codename STEAM cartridges update the firmware to 9.4?
The only way you can brick is if you download the wrong update files. Updating with a cart is a bad idea because you won't be able to use browserhax as cart updates do not update the browser. Your browser version will be too old for browserhax but your firmware version will be too high for MSET. Your only option then is going to be buying Cubic Ninja or Freaky Forms Deluxe to continue using homebrew. So, all around terrible idea.
 

aytug25

Well-Known Member
Member
Joined
Apr 26, 2016
Messages
320
Trophies
0
Age
38
XP
1,372
Country
hello everyone,
last week i bought a new 3ds xl with cfw from ebay now im looking for how to update it im totally noob on 3ds so i need help
i check my console and i noticed im using reinand hack method so i cant use rxtools, i changed my sd card but i format it on EMUNAND9 name menu, and it has almost 2 gb unformatted part i guess its for emunand so in my console menu i can see fbi installer and installed games but if i lauch official menu i cant see them so i think its my emunand and in settings menu my version is looking rei 9.2.0
i mean i think my console has reinand cfw and in settings it says rei 9.2.0 and i want to update it to latest reinand cfw
im using tubehax dns too for extra caution
please someone help me on update my cfw
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
hello everyone,
last week i bought a new 3ds xl with cfw from ebay now im looking for how to update it im totally noob on 3ds so i need help
i check my console and i noticed im using reinand hack method so i cant use rxtools, i changed my sd card but i format it on EMUNAND9 name menu, and it has almost 2 gb unformatted part i guess its for emunand so in my console menu i can see fbi installer and installed games but if i lauch official menu i cant see them so i think its my emunand and in settings menu my version is looking rei 9.2.0
i mean i think my console has reinand cfw and in settings it says rei 9.2.0 and i want to update it to latest reinand cfw
im using tubehax dns too for extra caution
please someone help me on update my cfw
Boot into emuNAND. Go to Settings. Check it says Rei 9.2 and not Ver 9.2. DO NOT exit Settings. Turn off TubeHax from Network connections. Go to Other Settings. Choose Update. Wait for it to finish and restart. Boot back into emuNAND. It will be updated now
 

aytug25

Well-Known Member
Member
Joined
Apr 26, 2016
Messages
320
Trophies
0
Age
38
XP
1,372
Country
Boot into emuNAND. Go to Settings. Check it says Rei 9.2 and not Ver 9.2. DO NOT exit Settings. Turn off TubeHax from Network connections. Go to Other Settings. Choose Update. Wait for it to finish and restart. Boot back into emuNAND. It will be updated now

thanks for helping but when i tried to update my console always gives me error and restart itself, so what should i do now, and is there another way to update it ?
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
thanks for helping but when i tried to update my console always gives me error and restart itself, so what should i do now, and is there another way to update it ?
Yes, you can use sysupdater and the 11.0 firmware cias. Careful to get the right region and console though or your emuNAND will brick. Back it up first just in case so you can restore it if you have to.
 

iViperz

Well-Known Member
Member
Joined
Jan 7, 2015
Messages
221
Trophies
0
Age
28
XP
330
Country
So I have an O3DSXL on 9.2 & 11.0 GW Emu and a N3DSXL with A9LH installed with Luma on 11.0. My NNID is still on my O3DSXL (unlinked) but I want to transfer it onto my N3DSXL. I know I can just transfer from my GW emunand onto luma but I want to know if anything happens to my set up after I've done this. I wasn't able to find any guides or even any posts providing a solution. Would someone be able to point me in the right direction?
 

ayy lmao

Well-Known Member
Member
Joined
May 26, 2015
Messages
153
Trophies
0
Age
124
XP
235
Country
United States
For the downgrade of 11.0 it's asking to make a new Nintendo network ID. Can't I use my old one? Also, is it true if I want to downgrade, im supposed to use an SD card that has small memory because the larger ones can cause a brick?
 
Last edited by ayy lmao,

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,890
Country
United States
Is it safe to update games I've download from freeshop with the eshop?
Technically you start the game that requesting to update and just select update but only games from the region yout sistem works for will update. Other out of region games won't update this way, You have to install cia file of update. :)
 

mercenary96

Well-Known Member
Member
Joined
May 30, 2008
Messages
106
Trophies
0
Age
35
Location
Berlin
XP
269
Country
Gambia, The
Okay, this was probably asked alot, but i cant find anything in the internet mess right now.. So I have a 3ds, running custom firmware 11.0.0.3. I want to prepare oot3dhax with my real cartridge version of ocarina of time 3ds, for another 3ds (one I already downgraded via fieldrunners).

I removed all of the saves on the cartridge, start the homebrewlauncher 1.1.1, and start sploint_instaler-oot3dhax. I press a, select save 1 and confirm my firmware. Afterwards it just says:

"Downloading payload... Looks like something went wrong . :(

Current status :
Failed to open http context
Error code : D8A0A01E"

How can i get the payload to work?
 

ayy lmao

Well-Known Member
Member
Joined
May 26, 2015
Messages
153
Trophies
0
Age
124
XP
235
Country
United States
Okay, this was probably asked alot, but i cant find anything in the internet mess right now.. So I have a 3ds, running custom firmware 11.0.0.3. I want to prepare oot3dhax with my real cartridge version of ocarina of time 3ds, for another 3ds (one I already downgraded via fieldrunners).

I removed all of the saves on the cartridge, start the homebrewlauncher 1.1.1, and start sploint_instaler-oot3dhax. I press a, select save 1 and confirm my firmware. Afterwards it just says:

"Downloading payload... Looks like something went wrong . :(

Current status :
Failed to open http context
Error code : D8A0A01E"

How can i get the payload to work?
Did you download the payload from the smea website?
 
  • Like
Reactions: mercenary96

ayy lmao

Well-Known Member
Member
Joined
May 26, 2015
Messages
153
Trophies
0
Age
124
XP
235
Country
United States
Im trying to downgrade with the DSI game currently. I'm trying to do the system transfer part with my O3DS that is hacked. Every time I try to connect with my Nintendo Network ID I always get an error. This has been happening a lot times. Is there a way to fix it?
Edit: It works now. I just had to do it many times to work, probably because its an O3DS
 
Last edited by ayy lmao,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    SylverReZ @ SylverReZ: @salazarcosplay, Morning