Hacking Luma3DS - Noob-proof 3DS Custom Firmware

Februarysn0w · May 28, 2016

dev mode worked with fixed build. thank you.

Sent from my 403SC using Tapatalk

Kazuma77 · May 28, 2016

xtreme1 said:
Hmm, but both systems are on 11 of their respective CFW. I'm really curious if it will take as it is now. Otherwise I guess I would have to make a GW emunand on my N3ds, transfer, load luma on it... (not sure how to convert GW to Luma on the same system even though), flash to sysnand of my a9lh n3ds

There's no "conversion" at all. An EmuNAND is an EmuNAND. All CFWs, including GW's, do their patching in memory. It doesn't matter what CFW setup your EmuNAND (or SysNAND for that matter). It will work with any CFW. The transfer should work just fine. Though I'm not seeing the point. You can dump saves with SDF. And you can dump your NNID and friends list with Decrypt9. But to each their own.

xtreme1 · May 28, 2016

pbanj said:
Just do the transfer like normal. It doesn't matter the cfw. Your "backed up" games won't transfer. But your bought ones and your nnid will.

Did

Kazuma77 said:
There's no "conversion" at all. An EmuNAND is an EmuNAND. All CFWs, including GW's, do their patching in memory. It doesn't matter what CFW setup your EmuNAND (or SysNAND for that matter). It will work with any CFW. The transfer should work just fine. Though I'm not seeing the point. You can dump saves with SDF. And you can dump your NNID and friends list with Decrypt9. But to each their own.

wasn't aware you could do that with dec9, transfer went through fine. The gateway emunand is and luma seem to be just fine. Thanks for the input everyone.

Kazuma77 · May 28, 2016

xtreme1 said:
Did

wasn't aware you could do that with dec9, transfer went through fine. The gateway emunand isn't functioning right away, but probably needs to be reformatted or something.

I admit, I've not tried it, but they're in the file dumping options. You probably do need to re-format EmuNAND. The process does tend to format the sending device at the end. Given GW's firm protection, that may not have gone smoothly.

xtreme1 · May 28, 2016

Kazuma77 said:
I admit, I've not tried it, but they're in the file dumping options. You probably do need to re-format EmuNAND. The process does tend to format the sending device at the end. Given GW's firm protection, that may not have gone smoothly.

nah simple mistake, forgot I used my larger sd in my n3ds and didn't have it in my GW card. Everything is A ok now

driverdis · May 28, 2016

So, is out of region manuals not working for some games, or is it just me?
I installed Luigi's Mansion 2 (EUR) and Inazuma Eleven Go Light (EUR) using FBI QR Code with CDN download and the games work fine but the manuals do not.
My N3DS XL is of USA Region

Kazuma77 · May 28, 2016

driverdis said:
So, is out of region manuals not working for some games, or is it just me?
I installed Luigi's Mansion 2 (EUR) and Inazuma Eleven Go Light (EUR) using FBI QR Code with CDN download and the games work fine but the manuals do not.
My N3DS XL is of USA Region

I'm thinking the region and language emulation feature might help with that.

driverdis · May 28, 2016

Kazuma77 said:
I'm thinking the region and language emulation feature might help with that.

doesn't this only apply while ingame and not on the home menu?

Kazuma77 · May 28, 2016

driverdis said:
doesn't this only apply while ingame and not on the home menu?

It doesn't really say. The fact that you enable it at the select menu led me to believe it was global, but try it and see.

driverdis · May 28, 2016

Kazuma77 said:
It doesn't really say. The fact that you enable it at the select menu led me to believe it was global, but try it and see.

It does not fix the problem unfortunately...

Master-Killua · May 28, 2016

Hello. I have sysnand and emunand linked, and I use arm9loaderhax with lumafw. After updating luma, now when I boot a gba game and I exit, it reboot to the sysnand. In older versions I remember it rebooted to the emunand. Does somebody know what happen or how could I fix it? Or there is not fix?

driverdis · May 28, 2016

Master-Killua said:
Hello. I have sysnand and emunand linked, and I use arm9loaderhax with lumafw. After updating luma, now when I boot a gba game and I exit, it reboot to the sysnand. In older versions I remember it rebooted to the emunand. Does somebody know what happen or how could I fix it? Or there is not fix?

It boots into SysNAND so the game saves properly. There is no fix for this yet and last time I checked, GBA always exited to SysNAND even as far back as in the AuReiNAND builds.

Wahrrelasse · May 28, 2016

I have Version 5.5 installed, because i wanted to access the e-shop, but now I get the error code 022-2634

Does anyone know how to fix that?

UranusDarkness · May 28, 2016

Aurora Wright said:
This is the official thread for the Luma3DS "CFW". Please be civil, and read the wiki below before asking questions or contacting me privately. No "CFW wars" allowed on the thread.

Wiki guide, explanation of all options and features: https://github.com/AuroraWright/Luma3DS/wiki
Download: https://github.com/AuroraWright/Luma3DS/releases

Aurora I have a question:
Why when I reboot my 3ds Luma doesn't save date and hour? (I compiled Luma3DS developer from the latest commit)

Kyojin · May 28, 2016

@UranusDarkness: be careful, it is against the forum rules to not post in English.

Wahrrelasse said:
I have Version 5.5 installed, because i wanted to access the e-shop, but now I get the error code 022-2634
Does anyone know how to fix that?

Check this and its answer.

UranusDarkness · May 28, 2016

Kyojin said:
@UranusDarkness: be careful, it is against the forum rules to not post in English.

Check this and its answer.

edited

Sono · May 28, 2016

I have updated to the latest version of Luma3DS developer edition, but it freezes on booting. The latest regular edition works, but I need to use the developer functions.
I have went through the troubleshooting steps, and it still doesn't boot, just freezes.

I have an old3DS with an ancient screen-init A9LH installation with an updated SysNAND on version 11.0

astronautlevel · May 28, 2016

MarcusD said:
I have updated to the latest version of Luma3DS developer edition, but it freezes on booting. The latest regular edition works, but I need to use the developer functions.
I have went through the troubleshooting steps, and it still doesn't boot, just freezes.

I have an old3DS with an ancient screen-init A9LH installation with an updated SysNAND on version 11.0

Update to the latest developer commit: https://astronautlevel2.github.io/Luma3DSDev/

Sono · May 28, 2016

astronautlevel said:
Update to the latest developer commit: https://astronautlevel2.github.io/Luma3DSDev/

I'm already on the latest commit version, since like 2hrs :/

MarcusD said:
to the latest version of Luma3DS developer edition

astronautlevel · May 28, 2016

MarcusD said:
I'm already on the latest commit version, since like 2hrs :/

Strange, there were some dev specific problems in 5.5 yesterday but the latest commit should fix them.

Hacking Luma3DS - Noob-proof 3DS Custom Firmware

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

I am Justice

Well-Known Member

I am Justice

Well-Known Member

I am Justice

Well-Known Member

I am Justice

Well-Known Member

I hate this world

#include "brain.h"

I hate this world

cripple piss

Well-Known Member

cripple piss

Well-Known Member

Similar threads

Popular threads in this forum