Hacking 3DS NOOB PARADISE - Ask questions here

iAqua · May 4, 2016

If I were to pull out my o3ds and a9lh it what would the brick rate be? Assuming I follow the guide to the T.

AnnappaPoojary · May 4, 2016

Temarile said:
Your EU cia's you can update through the eshop. The out of region games you need the update cia's for.

Ok thanks.

So i case of Luma3DS theres no difference between legit EUR cia's and illegit ones?

Sent from my ASUS_Z00AD using Tapatalk

Temarile · May 4, 2016

iAqua said:
If I were to pull out my o3ds and a9lh it what would the brick rate be? Assuming I follow the guide to the T.

Is your 3ds unmodded? That does make it a little bit easier, but it's not necessary.
I'd say the brick risk is less than 5% now. The programs used are really safe now and assuming you follow the guide to the T, there is no user error and just the programs have a risk of freaking out (which is very small now)

--------------------- MERGED ---------------------------

AnnappaPoojary said:
Ok thanks.

So i case of Luma3DS theres no difference between legit EUR cia's and illegit ones?

Sent from my ASUS_Z00AD using Tapatalk

Nope, because Luma3DS patches everything so the unlegit cia's are seen as legit as to say so.

iAqua · May 4, 2016

Temarile said:
Is your 3ds unmodded? That does make it a little bit easier, but it's not necessary.
I'd say the brick risk is less than 5% now. The programs used are really safe now and assuming you follow the guide to the T, there is no user error and just the programs have a risk of freaking out (which is very small now)

It's my unmodded Pikachu 3ds XL thats extremely special to me. I have done it three times and zero brick, but I'm a bit of a worry wart.

Temarile · May 4, 2016

iAqua said:
It's my unmodded Pikachu 3ds XL thats extremely special to me. I have done it three times and zero brick, but I'm a bit of a worry wart.

Nah, no worries there! I did it with my unmodded o3ds and I was just fine. Just think of it like this: the o3ds was made to run the lowest firmware (1.0.0-0) so downgrading to 2.1 and running it should be a piece of cake for the o3ds because it can run firmware from before that. (Not saying that the brick rate on the n3ds is higher, I have no stats, but the n3ds was never designed to run 2.1 firmware) Your 3ds will be fine. You're familiar with A9LH so you know what to do.

iAqua · May 4, 2016

Temarile said:
Nah, no worries there! I did it with my unmodded o3ds and I was just fine. Just think of it like this: the o3ds was made to run the lowest firmware (1.0.0-0) so downgrading to 2.1 and running it should be a piece of cake for the o3ds because it can run firmware from before that. (Not saying that the brick rate on the n3ds is higher, I have no stats, but the n3ds was never designed to run 2.1 firmware) Your 3ds will be fine. You're familiar with A9LH so you know what to do.

Alright I'm pretty sure OTPHelper scans through the emuNand to check if all titles are fine, is this true?

Temarile · May 4, 2016

iAqua said:
Alright I'm pretty sure OTPHelper scans through the emuNand to check if all titles are fine, is this true?

OTPHelper basically checks everything, checks everything again, does its job, checks everything again and once more. So yeah. It's pretty damn safe!

unknownnumber · May 4, 2016

Is there a list somewhere that contains all the games that have the ap check?
The only list i found is on reddit and is not up to date at all.

pbanj · May 4, 2016

unknownnumber said:
Is there a list somewhere that contains all the games that have the ap check?
The only list i found is on reddit and is not up to date at all.

I would say all new games. So look at that list then start looking up release dates, any newer games would be a safe bet they have the ap check

unknownnumber · May 4, 2016

Alright, i thought maybe it's the same as the newest copy-protection for pc games (denuvo) that costs a lot of money, so not all games have it.
Thanks.

Cava · May 4, 2016

Hi!

I just doing plailect's guide and there is an "Select the "Format SD Without EmuNAND" option" but there is no option.. just format sd (no emunand) (emunand default) (emunand minsize) (emunand legacy) what is the correct choice? Thanks!

Temarile · May 4, 2016

Cava said:
Hi!

I just doing plailect's guide and there is an "Select the "Format SD Without EmuNAND" option" but there is no option.. just format sd (no emunand) (emunand default) (emunand minsize) (emunand legacy) what is the correct choice? Thanks!

What step are you on?

Cava · May 4, 2016

Temarile said:
What step are you on?

Step 7

Section V - Removing RedNAND from your SD

Press Select on the main menu to eject your SD card
Delete emuNAND_original.bin from the root of your SD card
Backup every file on your SD card to a folder on your computer, all files will be deleted in the next step
(if you followed Part 3 of this guide, you can delete the SD card backup from that - this will replace it)
Reinsert your SD card into your 3DS.
Hold Y on boot to launch EmuNAND9
Go to "SD Format Options", then "Format SD..."
Select the "Format SD Without EmuNAND" option
Ignore the starter.bin prompt and continue
Press Select on the main menu to eject your SD card
Put your SD card in your computer, then copy all your files back into it

Temarile · May 4, 2016

Cava said:
Step 7

Section V - Removing RedNAND from your SD

Press Select on the main menu to eject your SD card

Delete emuNAND_original.bin from the root of your SD card

Backup every file on your SD card to a folder on your computer, all files will be deleted in the next step
(if you followed Part 3 of this guide, you can delete the SD card backup from that - this will replace it)

Reinsert your SD card into your 3DS.

Hold Y on boot to launch EmuNAND9

Go to "SD Format Options", then "Format SD..."

Select the "Format SD Without EmuNAND" option

Ignore the starter.bin prompt and continue

Press Select on the main menu to eject your SD card

Put your SD card in your computer, then copy all your files back into it

To remove your RedNAND you need to use Format SD (no EmuNAND)

Cava · May 4, 2016

Temarile said:
To remove your RedNAND you need to use Format SD (no EmuNAND)

Thank you!

proflayton123 · May 4, 2016

thedude28 said:
As long as SuperMysteryDungeonHax or whatever works on the latest firmware, then yes you can use it to downgrade.

Homebrew only needs entrypoints, so it doesn't matter if I use OoTHax or Ninjhax or SuperMysteryDungeonHax. The result will be the same.

Okay thank you , is downgrade possible with 10.7?

Sent from my SM-T230 using Tapatalk

Arubaro · May 4, 2016

proflayton123 said:
Okay thank you , is downgrade possible with 10.7?

Sent from my SM-T230 using Tapatalk

Yes, it is

proflayton123 · May 4, 2016

Arubaro said:
Yes, it is

Using mysterydungeonhax?

Sent from my SM-T230 using Tapatalk

pbanj · May 4, 2016

proflayton123 said:
Using mysterydungeonhax?

Sent from my SM-T230 using Tapatalk

Read this

ihaveamac said:
I've seen several people report that they have a hard time trying to downgrade using supermysterychunkhax.

Deleted-379826 · May 5, 2016

If i were to get A9LH on my n3ds with an emunand with cias installed and saves with the cias would it be possible to copy them over or something or will I have to waste my time re get them and you probably can use a tool to hold the saves till you done but again what about the cias

Hacking 3DS NOOB PARADISE - Ask questions here

ㅤ

Well-Known Member

(ﾉ◕ヮ◕)ﾉ*:･ﾟ✧ A9LH ✧ﾟ･: *ヽ(◕ヮ◕ヽ)

ㅤ

(ﾉ◕ヮ◕)ﾉ*:･ﾟ✧ A9LH ✧ﾟ･: *ヽ(◕ヮ◕ヽ)

ㅤ

(ﾉ◕ヮ◕)ﾉ*:･ﾟ✧ A9LH ✧ﾟ･: *ヽ(◕ヮ◕ヽ)

Active Member

The "friendly" neighborhood sandwich

Active Member

Well-Known Member

(ﾉ◕ヮ◕)ﾉ*:･ﾟ✧ A9LH ✧ﾟ･: *ヽ(◕ヮ◕ヽ)

Well-Known Member

(ﾉ◕ヮ◕)ﾉ*:･ﾟ✧ A9LH ✧ﾟ･: *ヽ(◕ヮ◕ヽ)

Well-Known Member

The Temp Loaf'

Soulspace Guardian

The Temp Loaf'

The "friendly" neighborhood sandwich

Deleted-379826

Guest

Similar threads

Popular threads in this forum

(ﾉ◕ヮ◕)ﾉ:･ﾟ✧ A9LH ✧ﾟ･: ヽ(◕ヮ◕ヽ)

(ﾉ◕ヮ◕)ﾉ:･ﾟ✧ A9LH ✧ﾟ･: ヽ(◕ヮ◕ヽ)

(ﾉ◕ヮ◕)ﾉ:･ﾟ✧ A9LH ✧ﾟ･: ヽ(◕ヮ◕ヽ)

(ﾉ◕ヮ◕)ﾉ:･ﾟ✧ A9LH ✧ﾟ･: ヽ(◕ヮ◕ヽ)

(ﾉ◕ヮ◕)ﾉ:･ﾟ✧ A9LH ✧ﾟ･: ヽ(◕ヮ◕ヽ)